Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in Portola Valley, CA | San Bruno Construction
We’re San Bruno Construction, and we provide independent Delta service across Portola Valley – not manufacturer-affiliated, but deeply familiar with how Delta fixtures perform in this specific town. The thing that makes our Delta work here different is that we understand how Portola Valley’s WUI fire-code requirements and well-water chemistry affect the fixtures you’re living with every day. So when your Delta Monitor shower valve starts dripping or your Everedge kitchen faucet loses its finish, we trace the cause back to what’s actually happening in your house and your water, not just the part number. Call (866) 472-1908 for a free estimate.
Why Portola Valley Residents Choose Us for Delta Service
Delta has been in American kitchens and bathrooms for decades, and our crew has installed and serviced the brand’s products across the Peninsula for years – from widespread Delta Monitor shower valves to the brand’s ubiquitous DIAMOND Seal cartridges and Everedge pulls. But what makes us useful as a General Contractor in Portola Valley is that we’ve seen how these fixtures fail in your particular conditions. The hard, mineral-laden water from wells and shared systems here scores valve seats differently than treated municipal water. The fire-season ash that settles on hillside homes and gets pulled into tight envelopes dulls finishes in a way nobody sees down in flatland cities.
Noel Carvalho, our owner, grew up in San Bruno and trained in construction technology at Skyline College, where the program taught him to read plans, understand load paths, and think through a project before a single tool comes out of the truck. So when we open up a shower wall in Portola Valley, we’re already thinking about the county inspection that comes after, the WUI requirement tied to that wall, and how to coordinate the Delta repair so the wall opening works for everything else the house needs. We carry genuine Delta OEM cartridges, seals, and trim parts, and we know when a repair is honest and when a valve body is too far gone to save.
Styles & brands we work with







Common Delta Construction Problems We Solve in Portola Valley
- DIAMOND Seal cartridge seizing in Monitor shower valves. Portola Valley’s well water and shared-system water carries minerals that build up inside the cartridge over years. We pull the old one, check the rough-in seat for scoring, and install a genuine Delta OEM replacement – the aftermarket equivalents simply don’t hold up to your water chemistry.
- Everedge kitchen faucet finish dulling and pitting after fire seasons. When your home’s fire-hardened exterior and tight envelope trap airborne ash and moisture, Delta’s finishes take a beating faster than in other towns. We can replace the trim or the faucet, and we’ll talk you through which Delta finishes hold up best in your conditions.
- Plastic retainer clips and inlet seals cracking in pull-down faucets. Hillside homes here with large glazed walls and no central AC swing through wide temperature changes. Delta’s internal plastic components crack under the thermal stress, causing drips and wobbly spray heads. OEM seal kits fix it.
- Drip at the trim even after a cartridge replacement. If the rough-in seat itself is scored by sediment – which happens a lot after WUI-mandated plumbing re-routes or well-system filter changes – a new cartridge won’t stop the leak. We resurface the seat or replace the valve body, and we’ll tell you which one is actually necessary.
- Loose or failing trim on Lahara and Windemere bath fixtures. The threaded connections and escutcheon plates on Delta’s bath trim can work loose over years of thermal cycling. We rebuild the valve, re-seat the trim, and make sure the wall opening meets Portola Valley’s fire-safe detailing requirements while we’re in there.
Delta Service in Portola Valley: What Local Conditions Mean for Your Equipment
Here’s the thing most Delta contractors never mention: because so much of Portola Valley sits in a Very High Fire Hazard Severity Zone, a bathroom or kitchen remodel that touches plumbing walls can trigger WUI compliance. That means ember-resistant vents, noncombustible exterior detailing, and in some cases a defensible-space plan – requirements that a contractor working in Palo Alto simply never has to price or coordinate. For a homeowner off Portola Road, say, a simple Delta shower valve replacement becomes part of a bigger wall-opening conversation. We’ve done exactly this work on a mid-century rancher off Portola Road, where our tech traced a chronic drip in a Ladera Delta service call to a scored cartridge seat caused by sediment from the home’s well system. We pulled the OEM DIAMOND Seal cartridge, resurfaced the seat, installed new inlet seals, and re-trimmed with Delta Lahara – all while coordinating the wall opening with the county’s WUI vent upgrade the homeowner needed anyway. That’s the Portola Valley version of a “simple faucet repair.”
Delta Models & Products We Service in Portola Valley
We service the Delta in Los Altos Hills and Portola Valley lines most common in local homes: the Monitor 13 and 14 Series shower valves you’ll find behind a lot of bathroom walls here, the Classic and Foundations single-handle kitchen faucets in older ranchers, Everedge pull-down kitchen faucets in newer remodels, and Lahara and Windemere bath and shower trim kits. We use genuine Delta OEM cartridges, seals, and trim parts on these fixtures because the aftermarket equivalents do not stand up to local water chemistry in Portola Valley. If the valve body is sound, a cartridge and seat kit is usually the honest fix. We only recommend a full valve swap when the rough-in is corroded or the plaster guard is compromised. We stock common Delta parts for fast turnaround in Portola Valley, so a Monitor cartridge replacement doesn’t leave you waiting a week on a shower.
We’re an independent Delta service provider – not affiliated with Delta Faucet Company and not an authorized warranty station. That means we don’t steer you toward whatever Delta tells us to sell. We tell you what your valve actually needs. You can learn more about our full Delta sales & service capabilities and how they fit into a broader remodel.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in Portola Valley
What we charge for Delta service in West Menlo Park and Portola Valley depends on what the job actually involves. A cartridge swap inside a bathroom remodel is a different scope than installing a new Delta Everedge faucet as part of a full kitchen rebuild. Here’s where our Delta work typically falls within larger projects:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Your free estimate includes a look at the existing valve or faucet, a straight answer about whether you need a repair or a replacement, and a written line-item quote if the work is bigger than a single fixture. Call (866) 472-1908 to schedule yours.
Serving Portola Valley, CA — Our Local Coverage Area
We’re based in the Portola Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Delta Construction in Portola Valley
It can. If the valve replacement opens a wall that is part of your home’s exterior envelope, Portola Valley’s WUI requirements may kick in – ember-resistant vents, noncombustible detailing, and the like. We coordinate that work with the county the same time we’re swapping the Delta valve, so you don’t get a surprise correction later. Call (866) 472-1908 for a site-specific answer.
You’re seeing the effect of airborne ash and moisture trapped by your home’s fire-hardened, tight envelope. Delta’s finishes pit and dull faster in those conditions than in homes with more ventilation. We can help you pick a Delta finish that holds up better, or replace the trim if it’s too far gone.
Yes. Delta’s Lahara trim is designed to work with the Monitor 13 and 14 series rough-in valves, and we do this match all the time in Portola Valley remodels. We’ll verify your valve body is compatible, then source the OEM Lahara trim in the finish you want.
If the valve body is sound and the seat hasn’t been scored by sediment, a new OEM DIAMOND Seal cartridge with fresh inlet seals is usually all you need. We only recommend a full valve swap when the rough-in is corroded or the plaster guard is compromised. We’ll show you what we found before we quote anything.
Yes. We install Delta kitchen faucets as part of full kitchen remodels in Portola Valley all the time, and we’re familiar with the town’s design-review process for renovations. We’ll coordinate the faucet installation with the rest of the remodel timeline and make sure the plumbing work passes inspection. Call (866) 472-1908 to talk through your project.
Good construction doesn’t announce itself – it just works, year after year.
Service Areas Near Portola Valley
We serve Portola Valley and the surrounding area. Our crews work throughout Portola Valley service area including ZIP code 94028. We also handle Delta service in Stanford just to the east, and Delta service in Palo Alto down the hill – where the water and fire codes are different, and so is how we approach the fixtures.
Book Your Delta Service in Portola Valley Today
If you’ve got a Delta fixture that’s dripping, sticking, losing its finish, or just not working right in your Portola Valley home, call us. We’ll give you a straight answer and a free estimate – for a single valve or a full remodel. (866) 472-1908.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Portola Valley and the Peninsula from San Bruno.