Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Redwood City, CA | San Bruno Construction
We provide independent PGT window and door service across Redwood City, from the 94061 flatlands to the 94062 hills. What separates us from a generic PGT shop is that we know how Redwood City’s microclimates and code zones stress these units differently, block by block. Fogged Architectural Series glass in a rancher near downtown, a weeping WinGuard slider in Redwood Shores, a Chapter 7A compliance gap in Emerald Hills. Those are three different jobs, three different fixes, and three different reasons to call (866) 472-1908.
If you’re dealing with a failed insulated glass unit, a slider that ponds water during atmospheric-river storms, or a hillside swap that needs WUI-compliant glazing, we can diagnose it and quote it. We’re not a PGT-authorized dealer and we don’t pretend to be. We’re a full-scope general contractor in Redwood City led by Noel Carvalho, and we’ve torn into enough PGT frames to know exactly what fails and what’s still worth saving.
Call (866) 472-1908 for a free estimate on PGT repair or replacement anywhere in Redwood City.
Why Redwood City Residents Choose Us for PGT Service
We’ve installed and serviced PGT vinyl windows and patio doors across the Peninsula through every WUI code cycle and marine-layer winter the region throws at them. That means we know the PGT sales & service side of this business from the inside: frame extrusions, glazing beads, sash hardware, roller assemblies. Not just what a spec sheet says, but what actually happens to a WinGuard slider when it cycles through daily fog-to-sun swings for five years in the 94061 flats.
Noel Carvalho grew up off El Camino Real in San Carlos, close enough to the Caltrain station that he spent his teens watching the city get built up around him and decided early on he wanted to be the one doing the building. He trained in construction technology at Skyline College, learning to read plans and understand load paths before a tool ever comes out of the truck. Over the past two-plus decades he’s run residential projects across San Mateo County, including more PGT window and door replacements in Redwood City than he can count.
We use OEM PGT glazing, balances, rollers, sash locks, and weatherstripping whenever the frame is still serviceable. When OEM is discontinued, we’ll tell you that too, and we’ll explain whether a quality aftermarket part or a full replacement makes more sense. No games, no upselling a tear-out because the hardware aisle is easier than the glass supplier.
Good construction doesn’t announce itself. It just works, year after year.
Styles & brands we work with
Common PGT Construction Problems We Solve in Redwood City
- Weep-hole and sill-pan clogging on WinGuard sliders in Redwood Shores and downtown. Flat and low-slope assemblies pond during atmospheric-river storms, and water backs into the door track instead of draining out. The fix usually starts with clearing the weep holes and re-setting the sill pan slope, not replacing the door. We see this every winter in Redwood City’s engineered-fill neighborhoods.
- Fogged insulated glass units on Architectural Series vinyl units in flatland ranchers. Failed seals between panes show up as haze and lost solar control, not an obvious crack. The frames around them are often in great shape. In the 94061 and 94063 tracts, we replace IGUs and reset the sash rather than tearing out a perfectly good frame.
- Marine-layer condensation and weatherstripping wear on west-facing elevations. Redwood City sits in the transition between the foggy Peninsula and Silicon Valley, and the daily fog-to-sun swing is hard on vinyl frames and glazing beads. Seals compress unevenly. Weatherstripping goes stiff. West-facing PGT units in the flatlands eat glazing beads faster than north- or east-facing units do.
- Chapter 7A compliance gaps on hillside installs in Emerald Hills and along the Edgewood Park edge. Standard-issue PGT screens, vents, and glazing details that are perfectly legal downhill often don’t meet WUI requirements in the 94062 hills. A window that’s functionally fine can still be a code violation when you go to sell or pull a permit for other work.
- Sliding door roller and track wear on heavily used WinGuard sliders. Redwood Shores and the downtown flats have a lot of patio-door-heavy floor plans. Rollers flatten, tracks score, and the door starts dragging. Replacing rollers and realigning the panel is usually a same-day job if we’ve got the OEM hardware on the truck.
PGT Service in Redwood City: What Local Conditions Mean for Your Equipment
Here’s the thing most PGT pages never mention: in the 94062 hills, Chapter 7A of the California Building Code governs glazing and exterior assemblies. That means a PGT window or door swap in Emerald Hills or along the Edgewood Park edge is a code-compliance job, not just a like-for-like replacement. The distinction doesn’t apply to the flatland tracts a few minutes downhill. A contractor who quotes a hillside PGT replacement using standard downtown assemblies is setting the homeowner up for a failed inspection or a retrofit order later. We check the WUI status on every 94062 job before we quote, because a standard screen or vent that’s fine on a 94061 rancher can be a red-flag item on a 94062 hillside rebuild. That’s also why we stock and order WUI-compliant glazing and hardware for PGT units in those zones: the fix has to match the code, not just the original window.
And on a post-and-beam Eichler-style rancher in the 94061 flatlands near downtown, our crew found PGT Architectural Series single-hungs with failed insulated glass units, hazy panes and condensation between the lites, while the vinyl frames were still solid. We measured and ordered OEM-matched replacement IGUs and sash hardware, reset the sashes, and re-flashed and re-sealed the openings, keeping the original frames and saving the owner a full tear-out. The west-facing units that had been weeping at the sill got new weep-hole clear-outs and weatherstripping so the fog-to-sun swing stopped pooling water in the track.
PGT Models & Products We Service in Redwood City
We service the PGT WinGuard Aluminum impact-resistant window and sliding glass door line, the PGT in West Menlo Park, WinGuard Vinyl impact sliders, the Architectural Series vinyl single-hung and casement windows, and the Sentinel by PGT vinyl line. Across Redwood City, we match OEM-compatible glazing, balances, rollers, sash locks, and weatherstripping where the frame is still sound, and we use quality aftermarket hardware only when OEM is discontinued. We’d rather tell you a failed insulated glass unit means replacement is smarter than patching, than sell you a patch that fails again in a year. Our Redwood City service area covers 94064, 94065, 94061, and 94062, and we keep common PGT hardware on hand for fast turnaround.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Redwood City
What you’ll pay in Redwood City depends on what failed and where the unit sits. A fogged Architectural Series IGU in a 94061 rancher is a different number than a Chapter 7A retrofit in Emerald Hills. Here’s a realistic range for the services on this page:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Your free estimate includes a written, line-item quote. No change orders when we find something we should have seen on the walkthrough. Call (866) 472-1908 and we’ll come out, look at the units, and give you a number you can actually budget around.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Redwood City
Yes. Any new or replacement glazing, exterior vents, and many exterior assemblies in the 94062 hills, including Emerald Hills and the Edgewood Park edge, must meet Chapter 7A Wildland-Urban Interface requirements. If you’re swapping a PGT window or door in that zone, the unit and its surrounding assembly need to be WUI-compliant, not just a match for what was there before. We check WUI status on every 94062 quote before we price it. Call (866) 472-1908 for a free evaluation.
Redwood Shores sits on engineered fill, and most of the homes there have low-slope or flat assemblies that pond water during atmospheric-river storms. When the sill pan or weep holes on a WinGuard slider clog, that ponded water backs into the door track instead of draining out. The usual fix is clearing the weep holes, re-setting the sill pan slope, and checking the drainage path underneath the track, not replacing the whole door. We can diagnose it in one visit. Call (866) 472-1908 to schedule a look.
That haze is a failed insulated glass unit, which means the seal between the panes has broken and the window has lost its solar control, even though the vinyl frame and sash are probably still solid. On many Redwood City ranchers, especially Eichler-style homes in the 94061 flats, we replace just the IGU and reset the sash rather than tearing out the whole window. It saves real money. Call (866) 472-1908 and we’ll tell you if your units are worth reglazing or if replacement is the smarter spend.
Often, yes. On post-and-beam Eichler-style homes in Redwood City’s 94061 flatlands, the original PGT frames can be in good shape while the IGUs are fogged. We can measure and order OEM-matched replacement IGUs, reset the sashes, and re-flash the openings without disturbing the post-and-beam structure. It’s a cleaner job and usually cheaper than a full tear-out. Call (866) 472-1908 for a free walkthrough and we’ll tell you what’s realistic for your house.
No. We are an independent contractor and San Bruno Construction is not PGT-authorized, and we make no manufacturer warranty or partnership claim. What we do have is hands-on experience with PGT WinGuard and Architectural Series units across Redwood City, and we use OEM-compatible parts whenever the frame is still serviceable. Call (866) 472-1908 and we’ll give you an honest read on your windows or doors.
Service Areas Near Redwood City
San Bruno Construction provides PGT service throughout Redwood City service area and the surrounding Peninsula communities. We work regularly in San Bruno, South San Francisco, Millbrae, Burlingame, and Brisbane. For homeowners just south in PGT service in Emerald Lake Hills or across the Bay in PGT service in Sausalito, we bring the same PGT-specific knowledge and local code fluency to every job.
Book Your PGT Service in Redwood City Today
If you’ve got a PGT window or door in Woodside PGT service area or Redwood City that’s fogged, leaking, dragging, or not up to WUI code, call (866) 472-1908. We’ll schedule a free estimate, walk the property, and give you a line-item quote you can actually use. One contractor, every phase, from countertops to rooflines to ADUs, with the PGT knowledge to get your windows right.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Redwood City since 2003.