Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Santa Cruz, CA | San Bruno Construction
We provide independent PGT window and sliding door service across Santa Cruz, from Capitola to Live Oak and Pleasure Point. The difference here comes down to one thing: we work on PGT units in marine air, on remodels that older coastal homes actually need. If your PGT sliders are corroded or your Windows are fogged, call (866) 472-1908 for a free estimate. We’re San Bruno Construction, led by Noel Carvalho, and we’ve been diagnosing PGT hardware on Santa Cruz homes long enough to know what salt air does to a roller track.
Why Santa Cruz Residents Choose Us for PGT Service
Plenty of contractors can order a window. Fewer can tell you why your WinGuard slider binds every June when the marine layer hangs around, or why the weatherstripping on your west-facing Premiere unit gave out three years before the east-facing one did. Noel Carvalho trained in construction technology at Skyline College, where the program taught him to read plans and think through load paths before a single tool comes out of the truck. That habit carries into how we approach PGT work: we diagnose the opening before we touch the window. We stock OEM PGT rollers, weatherstripping, and hardware for common Santa Cruz applications, and when a track is discontinued we source proven aftermarket equivalents that match the profile and rating. We also carry the full-scope general contracting range to handle what the window work uncovers: a rotted sill, a racked opening, a wall that needs reframing before new glass goes in. One contractor, every phase. We also handle full PGT sales & service for homeowners replacing older units or adding on.
Styles & brands we work with
Common PGT Construction Problems We Solve in Santa Cruz
- Salt-corroded WinGuard aluminum frames and rollers. The marine air off Monterey Bay is relentless on exposed aluminum. We see pitting and seized rollers most often on west- and south-facing sliders in Pleasure Point and Twin Lakes, where wind-driven salt spray hits the track directly. We free the tracks, replace OEM rollers, and re-seal the sill pans.
- Wind-driven rain intrusion at sill pans and corner welds. Older Premiere vinyl units develop hairline separations at the corner welds after years of coastal fog and thermal cycling. Water stains on the interior sill are the tell. We re-seal and replace weatherstripping before the framing underneath starts to rot.
- Flat-spotted rollers and racked tracks on large sliders. Beach cottages on raised post foundations settle, and when the opening racks even a quarter of an inch, a 12-foot slider will bind. We’ve pulled rollers on PGT sliders in Live Oak that were ground flat on one side from years of fighting a settled opening.
- Fogged or hazed IGUs on ocean-facing glass. Salt spray, UV, and constant thermal cycling are hard on insulated glass units. We see desiccant haze and fogging most often on direct ocean-facing PGT windows. We price a glazing-seal repair first and only recommend full replacement when the frame itself is compromised.
- Failed weatherstripping on older PGT units. The constant damp and salt load breaks down rubber and brush seals faster in Santa Cruz than inland. Drafty corners and whistling on windy days are the symptoms. We match OEM weatherstripping where available and proven aftermarket equivalents where the unit is discontinued.
PGT Service in Santa Cruz: What Local Conditions Mean for Your Equipment
Santa Cruz’s 50-foot coastal height limit and Coastal Commission review mean almost no one here is building a big new subdivision. The work is remodels, additions, ADUs, and rebuilds subject to coastal permits. That changes the PGT conversation entirely. When we add a ground-floor bedroom to a 1960s ranch in Live Oak or convert a Pleasure Point carport into living space, we’re usually matching the profile, frame color, and sightlines of PGT units that were installed years ago in the rest of the wall. You don’t rip out good windows just because you added a wall. You match them. That’s a skill that matters more in Santa Cruz than almost anywhere else on the California coast, because the remodel-heavy permit reality here means partial-wall PGT work is a routine job, not an oddball request. We’ve done enough of it to know which PGT frame profiles are still in production and which ones need a custom-extruded match. And we know which older PGT units under the coastal height limit are actually worth saving versus replacing.
PGT Models & Products We Service in Santa Cruz
We service the PGT lines most common on Santa Cruz homes. PGT WinGuard Aluminum impact-resistant sliders and windows show up on coastal rebuilds where code demands impact-rated glazing. PGT WinGuard Vinyl single-hungs and sliders are common on additions and replacements. PGT Premiere Aluminum appears on older homes, and PGT Eze-Breeze vertical and horizontal sliding porch windows are everywhere on the enclosed porches of Pleasure Point and Twin Lakes beach cottages. Our parts approach is straightforward: OEM PGT rollers, weatherstripping, and hardware wherever still available; proven aftermarket equivalents for discontinued tracks and seals, matched by profile and rating. For fogged or impact-damaged units, we price a glazing or seal repair first, and only recommend full replacement when the frame is corroded, the opening has racked, or code, like current impact or egress requirements, forces the swap. We do not claim to be a PGT authorized dealer. We are independent, and our recommendations come from field experience, not a manufacturer’s sales quota.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Santa Cruz
PGT work in Santa Cruz falls into a few predictable bands depending on scope. A single-window replacement with a mid-range unit runs $4,500 to $15,000. Full impact window installation, which coastal code often requires for additions and rebuilds, lands between $8,000 and $25,000. Where PGT work is part of a larger addition, plan $45,000 to $130,000 for the full project. What drives the cost: the number of openings, whether coastal code forces impact-rated glazing, whether the existing frames can be salvaged or need full tear-out, and whether the opening itself has racked. Our free estimate covers all of it, in writing, line by line.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
Call (866) 472-1908 for a free estimate. We’ll walk the property, look at your PGT units, and tell you honestly what needs work now and what can wait.
Serving Santa Cruz, CA — Our Local Coverage Area
We’re based in the Santa Cruz area and know this community well, from Pasatiempo to the coast. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Santa Cruz
It’s usually both. Salt air seizes the rollers and tracks on WinGuard aluminum sliders, while raised-post beach cottages settle and rack the opening. We check the frame, the rollers, and the foundation before recommending a fix. Sometimes it’s a $200 roller replacement; sometimes the opening needs re-shimming. Call (866) 472-1908 and we’ll diagnose it on site.
Yes. In Santa Cruz, where coastal height limits and Coastal Commission review push most PGT work toward remodels and additions, matching existing frame profile, color, and sightlines is a routine part of the job. We identify which PGT line you have, source the matching profile where still in production, and spec an equivalent where the series has been discontinued.
Often, yes. Santa Cruz County enforces impact-rated glazing on many coastal rebuilds and additions, especially where wind-borne debris is a risk. We’ll check your specific permit requirements with the city or county before you buy anything, because ordering the wrong glass costs weeks and money you’ll never get back.
Not always. Fogging means the IGU seal has failed and moisture has entered the glass unit. We price a glazing or seal repair first. Full replacement only makes sense when the frame is corroded, the opening has racked, or code requires an upgrade. Call (866) 472-1908 for an exact quote; the estimate is free.
For fire-rated and impact-rated applications, yes. PGT’s WinGuard lines carry ratings that work for wildfire-hardening projects in the Bonny Doon hills, where ember intrusion and wind-driven fire are real concerns. We also factor in the fog and damp of redwood-adjacent slopes, which demand good seals and corrosion-resistant hardware. We’re happy to walk you through the options for your specific exposure, including Mount Hermon homes in the redwood zone.
Service Areas Near Santa Cruz
We serve homes across Santa Cruz County, including Live Oak, Soquel, Pleasure Point, Twin Lakes, and the Westside. For nearby communities: PGT service in Live Oak covers the east side ranch tracts, and PGT service in Soquel reaches the hillside homes where fire-hardening matters. We also work across our broader Santa Cruz service area.
Book Your PGT Service in Santa Cruz Today
If your PGT sliders are binding, your glass is fogged, or you’re planning an addition that needs to match existing windows, call (866) 472-1908. We’ll schedule a free estimate, walk the property, and give you a written line-item quote. Good construction doesn’t announce itself – it just works, year after year. That’s what we build toward.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Santa Cruz with full-scope residential construction and PGT window service.