Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Redwood Shores, CA | San Bruno Construction
We’re San Bruno Construction, an independent general contractor that services and installs CWS kitchen, bath, and cabinet packages throughout Redwood Shores. We are not authorized, sponsored, or warranty-backed by CWS, and we say so plainly. What we bring instead is years of hands-on familiarity with CWS cabinetry and fixtures, plus something most CWS providers can’t offer: a working understanding of how Redwood Shores’ engineered fill, perched water table, and bayside fog change the way those products perform, fail, and get repaired. Call (866) 472-1908 for a free estimate.
Why Redwood Shores Residents Choose Us for CWS Service
Most cabinet and countertop crews can install CWS product. Few can tell you why the painted shaker doors on a 1990s Redwood Shores kitchen keep blistering at the bottom rail, or why the quartz vanity seam in your lagoon-side bathroom keeps lifting open no matter how many times someone re-caulks it. That’s the difference. Noel Carvalho, our owner, grew up off El Camino Real in San Bruno and trained in construction technology at Skyline College, where he learned to read plans, understand load paths, and think through a project before the first tool comes out of the truck. Over the past two-plus decades he’s run residential projects across San Mateo County, including CWS in San Mateo and plenty of CWS-heavy kitchens and baths right here in the 94065 zip code. We look at your CWS install as part of the house it sits in, not as a standalone product. In Redwood Shores, that matters more than in almost any city on the Peninsula.
Styles & brands we work with
Common CWS Construction Problems We Solve in Redwood Shores
- Bottom-rail blistering and peeling on painted CWS cabinet doors. Redwood Shores gets fog, onshore wind, and damp air off the Bay. That moisture settles low, right at the toe-kick zone. Painted doors, especially the Brookhaven-style shaker line, start lifting paint at the bottom rails. We replace damaged doors with genuine CWS components where the match matters for resale, then seal and raise the base so it stops.
- Soft-close hinges and undermount drawer glides failing early. Salt-laden air does a number on metal hardware. We’ve pulled soft-close hinges that look like they spent a season on a boat. We stock quality aftermarket glides and hinges with better corrosion resistance than the originals, and we’ll tell you when a direct CWS match is the smarter call.
- Quartz vanity and countertop seams darkening or lifting. When a slab or timber-pile floor shifts on engineered fill, the movement opens seams and silicone joints. It isn’t a product defect. It’s the house breathing. We address the substrate stability first, then repair or replace the seam with materials suited to a fill-soil home.
- Delaminating cabinet boxes above wet bath floors. This one is classic Redwood Shores. Moisture wicks up through a raised plank floor or slab and rots the bottom of the cabinet box. By the time you see swelling at the toe-kick, the damage is already done. We demo, repair the floor, and reset cabinets on a sealed, raised base.
- Pre-hung and refaced CWS cabinet runs showing sag or misalignment. Original 1980s and 1990s installs in this city often sit on floors that have settled unevenly. Doors that used to line up now don’t. We re-level the run, shim properly, and get everything closing square again.
CWS Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores is almost entirely built on reclaimed bay salt-marsh and fill. That single sentence explains more about how CWS cabinetry and fixtures behave here than any product brochure ever will. The ground under these 1980s and 1990s Mediterranean-style stucco homes consolidates and settles differently than the native soils over in San Carlos or Belmont, and the perched water table sits close enough to the surface that any tear-out, especially a kitchen or bath, exposes conditions inland contractors never see. A CWS cabinet run installed on a floor that’s drifted a quarter inch out of level will show it in the doors within a year. Quartz seams open. Vanity bases rock. The answer is rarely just a new hinge or more silicone. It’s re-leveling the floor, re-flashing the base, and sometimes engineering the substrate before the new CWS product goes down. None of that shows up in a generic cabinet quote, but it’s standard practice for any remodel we run in this city.
CWS Models & Products We Service in Redwood Shores
We work on the CWS lines most common in Redwood Shores homes: Brookhaven-style painted shaker cabinet doors with soft-close, full-extension drawers; CWS quartz vanity tops and 60-inch furniture-style bath vanities; solid-surface and quartz kitchen countertop packages; and the pre-hung and refaced cabinet runs that went into so many 1990s kitchen re-dos around here. On parts, we carry both OEM CWS hardware and door/drawer components and quality aftermarket glides, hinges, and seals. Our rule is simple: use genuine CWS parts where a direct match protects fit and resale, and use aftermarket parts where they outperform the original in Redwood Shores’ salt air and humidity. We’ll tell you which is which and why. For wider CWS product coverage, see our CWS sales & service page.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Redwood Shores
Pricing depends on scope, not guesswork. A single cabinet door replacement runs far less than a full kitchen teardown on a settled fill-soil floor. Here are the ranges we work within for the most common CWS-related projects in Redwood Shores:
| Project | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Countertop Installation | $2,000 – $6,500 |
Every free estimate includes a written line-item quote, an honest assessment of what’s under the work area (not just what’s on top of it), and a real conversation about whether repair or replacement makes sense for your CWS product. Call (866) 472-1908 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Redwood Shores
Because fog and onshore wind drive moisture into the toe-kick zone, and the low, damp air at floor level attacks painted door rails before anywhere else. The fix usually involves re-flashing and raising the cabinet base so the bottom of the doors aren’t sitting in a humid microclimate, then replacing the damaged doors. Call (866) 472-1908 and we’ll take a look at what’s actually causing yours.
Yes, often significantly. Bay mud and engineered fill settle, which means floors drift out of level and substrate movement shows up in cabinets, countertops, and tile. Before new CWS product goes in, we check level, moisture, and structural condition. Sometimes the remodel is straightforward. Sometimes it needs floor leveling and base sealing first. We tell you upfront.
Yes, but it takes planning. A raised timber-pile or engineered-fill floor has to be assessed for slope, moisture, and structural capacity. The shower pan and waterproofing have to be set up to handle subtle movement without cracking. We run these installs regularly in Redwood Shores townhomes and we engineer the base so the tile work actually lasts.
Not necessarily. Quartz and solid-surface CWS tops both work fine here if the seams are done right and the surface underneath is stable. What fails in Redwood Shores is more often the seam, the joint, or the substrate than the material itself. We account for fill-soil movement when we template and install.
It depends on the scope and exact location. Some projects near the bayfront require BCDC or flood-plain review, and additions or structural changes on fill lots may need geotech reports. We pull permits, coordinate the required reports, and walk you through the process so there are no surprises. Call (866) 472-1908 and we’ll tell you what your specific project needs.
Service Areas Near Redwood Shores
We serve the full Redwood Shores service area and surrounding Peninsula cities. Our CWS crews also work in CWS service in Chinatown, CWS service in Half Moon Bay, San Bruno, South San Francisco, Millbrae, Brisbane, and Burlingame.
Book Your CWS Service in Redwood Shores Today
One contractor, every phase, from countertops to rooflines to ADUs. Call (866) 472-1908 to schedule your free estimate with Noel and the San Bruno Construction team. We know CWS product, and we know Redwood Shores ground. You shouldn’t have to settle for a crew that only knows one of those.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Redwood Shores since day one.