Mr-Glass Construction in Hillsborough, CA

Mr-Glass Construction in Hillsborough, CA | San Bruno Construction

We provide independent Mr-Glass shower enclosure and glass installation service across Hillsborough, from the estate lots near Skyline Boulevard down to the flat approach along El Camino. What sets our Mr-Glass work here apart is adaptation: Hillsborough homes sit on sloped, shifting ground with out-of-square bathrooms, so every enclosure we install gets templated to the actual wall, not the blueprint. Call (866) 472-1908 for a free estimate on Mr-Glass service in Hillsborough.

We’ve specialized in Mr-Glass systems for over a decade. Frameless enclosures, neo-angle units, tub-to-shower conversions. We are an independent service provider and are not authorized, endorsed, or affiliated with Mr-Glass. But we know the hardware, the glass tolerances, and the sealing details that make these installations last in this specific climate. You can read more about our broader Mr-Glass sales & service experience.

Why Hillsborough Residents Choose Us for Mr-Glass Service

Hillsborough homeowners don’t call a generalist for glass work. They call someone who has dealt with a 1970s Tudor addition where the bathroom floor slopes a quarter inch across four feet, or a newer rebuild where the shower alcove was framed by a crew that never checked for plumb. We bring laser templating equipment and cut panels to fit what’s actually there.

Noel Carvalho, our owner, grew up off El Camino Real in San Bruno and trained in construction technology at Skyline College before running residential projects across San Mateo County for over two decades. He’s pulled permits at City Hall, framed additions, and finished bathrooms where the tile actually lines up. That background matters when a Mr-Glass enclosure needs to land square in a bathroom that isn’t. We also cover the broader Hillsborough service area and understand how this town’s permit process works from the inside.

We stock common Mr-Glass replacement parts locally, so hinge swaps and sweep replacements don’t stall waiting on a distributor. If a panel is intact and only the hardware has failed, we repair. If the glass is chipped, cracked, or the enclosure predates modern codes, we recommend replacement with a Mr-Glass-compatible system that will actually hold up.

Common Mr-Glass Construction Problems We Solve in Hillsborough

Here are the five calls we take most often from Hillsborough homeowners:

• Doors drifting and seals wearing prematurely: Frameless Mr-Glass enclosures installed on out-of-level hillside bathroom floors cause the door to drift toward the low side. Seals compress unevenly, then wear through. We reset the hinges and sometimes shim the track before rehanging the panel.
• Pivot hinges and rollers corroding: The Peninsula’s damp winter air works into pivot bearings and roller tracks, especially in bathrooms without an exhaust fan or window. We replace gummed-up hardware with corrosion-resistant parts and verify the ventilation path so the problem doesn’t return in March.
• Glass panels chipping near hardware: On steep, wooded lots, seasonal ground movement racks the shower opening slightly. That stress transfers through the hinge plate into the glass. We see chips and small cracks at the top corner of the panel by summer. Fixing this is not just a glass swap; the opening needs to be re-measured and the hardware re-torqued.
• Water wicking into drywall and framing: Poorly sealed bottom sweeps and wall jambs let water sneak past the glass into adjacent drywall. After heavy winter rains, we get calls about bubbling paint and soft baseboards next to the shower. We pull the sweep, assess the damage, and reseal with a proper jamb profile.
• Out-of-square shower openings: Hillsborough walls are frequently out-of-plumb, unlike flat-lot subdivisions nearby. A standard pre-cut Mr-Glass panel will not fit a shower opening that’s half an inch wider at the top than the bottom. We template every opening and order or cut custom glass to match.

Mr-Glass Service in Hillsborough: What Local Conditions Mean for Your Equipment

Hillsborough’s town building department runs design review for exterior changes, but interior bathroom glass work like Mr-Glass enclosures typically sidesteps that process. That’s good news for scheduling. The catch is that hillside homes here often need custom glass templating because walls are frequently out-of-plumb, unlike flat-lot subdivisions nearby. A shower opening that looks square to the eye can be off by a full half inch from top to bottom. Standard Mr-Glass panels are cut square. Shoehorning one into an irregular opening leaves gaps at the jambs, stresses the glass at the hinge points, and invites water past the seals within a few winters.

We recently installed a Mr-Glass Serenity Series frameless sliding enclosure in a 1980s hillside home off a winding street near Skyline Boulevard. The existing shower opening was more than half an inch out of square. Our tech used laser templating and custom-cut 3/8-inch tempered glass panels to fit the irregular opening, then sealed with Mr-Glass replacement sweeps and new pivot hardware. The homeowner now has a watertight, smoothly operating enclosure that handles the home’s seasonal settling without leaks. That’s the difference between a generic glass install and knowing what Hillsborough hills do to a shower over twenty years.

Mr-Glass Models & Products We Service in Hillsborough

We work on the full Mr-Glass product line that shows up in Hillsborough homes:

• Mr-Glass Serenity Series frameless sliding shower doors
• Mr-Glass 3/8-inch tempered glass walk-in panels
• Mr-Glass Neo-Angle corner shower enclosures
• Mr-Glass custom-cut glass for tub-to-shower conversions

For parts, we source genuine Mr-Glass replacement hinges, handles, sweeps, and seals when available. When lead times stretch or a line gets discontinued, we use high-quality aftermarket glass and hardware that meets or exceeds OEM specs. We carry common sweeps and pivot sets in our van so a Hillsborough service call often wraps up in one visit.

Mr-Glass Service Pricing in Hillsborough

FAQs – Mr-Glass Construction in Hillsborough

Service Areas Near Hillsborough

We also provide Mr-Glass service in San Bruno and nearby Peninsula communities, including South San Francisco, Millbrae, Burlingame, Brisbane, and Colma. For coastal coverage, see Mr-Glass service in Pacifica. For the inland side, Mr-Glass service in Broadmoor covers the unincorporated community just south of Daly City.

Book Your Mr-Glass Service in Hillsborough Today

If your Mr-Glass shower is leaking, sticking, or showing stress cracks, call (866) 472-1908. We’ll schedule a free on-site estimate, laser-measure the opening, and give you a written line-item quote before any work begins. Hillsborough homeowners deal with enough hillside quirks. Your shower glass shouldn’t be one of them.

Written by Noel Carvalho, Owner at San Bruno Construction, serving Hillsborough since our first hillside enclosure install more than a decade ago.