Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in San Bruno, CA | San Bruno Construction
We’re San Bruno Construction, an independent contractor offering Home Remodeling – San Bruno and Ameristar steel entry door and storm door service. We are not an Ameristar-authorized dealer, and we don’t claim any manufacturer warranty backing. What we do claim is working knowledge of how these doors behave in San Bruno’s fog, on hillside lots, and under SFO’s noise overlay. If you need an Ameristar door repaired, adjusted, or replaced, call Noel Carvalho and our team at (866) 472-1908 for a free estimate. We coordinate the whole job, not just the door.
Why San Bruno Residents Choose Us for Ameristar Service
Noel Carvalho grew up off El Camino Real in San Bruno, close enough to the Caltrain station that he watched these neighborhoods get built up around him. He trained in construction technology at Skyline College, learning to read plans and think through load paths before a single tool comes out of the truck. That training shapes how we approach Ameristar work here: we’re not swapping parts, we’re fixing why the part failed. A rusted bottom rail on a west-facing Rollingwood entry isn’t just a door issue, it’s a fog-belt drainage issue. We fix both.
We’ve installed and adjusted Ameristar steel doors on flatland bungalows near San Mateo Avenue and on split-levels up in the hills west of El Camino. That matters because the same door behaves differently depending on where your house sits. Fog and marine air hit the flats differently than they hit a hillside with direct west exposure. We know what to check before we even touch the hinges.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in San Bruno
- Rust bleed and paint blistering along the bottom rail. Ameristar steel door sweeps wick moisture during San Bruno’s fog season. We see the telltale orange staining within a few years on homes where the sill wasn’t pitched correctly for our marine climate.
- Drafts and fog-moisture intrusion through compressed weatherstripping. Factory corner seals on Ameristar entry doors compress and tear on south and west exposures, which take the brunt of the afternoon fog line. Cold air and moisture creep into the jamb cavity and start hidden rot.
- Sagging storm doors with drag and latch misalignment. Hillside homes in San Bruno settle. Adjustable hinge and closer hardware on Ameristar storm doors loosens as that settlement shifts the rough opening, leaving the door dragging or refusing to latch.
- Chalking and fading on west-facing finishes. The baked-on finish on Ameristar insulated steel slabs chalks where doors face direct marine fog, especially on west-facing Belle Air and Rollingwood entries. It’s cosmetic at first, but left alone the chalked finish exposes the steel beneath.
- Failed door slab insulation after repeated fog condensation. We’ve pulled Ameristar slabs where the internal insulation had wetted and failed. Once moisture gets inside a steel door, patching doesn’t fix it. Replacement beats patching every time in that case.
Ameristar Service in San Bruno: What Local Conditions Mean for Your Equipment
In Belle Air and Rollingwood, the rules are different. Any second-story work, and even some door and window replacements, must clear SFO’s Part 77 imaginary surfaces and the city’s airport noise overlay. That’s a review process that can add months to a permit, and it often means acoustically rated assemblies drive the spec, not a standard Ameristar steel door package. We’ve worked through City Hall on San Mateo Avenue enough times to know which projects trigger the noise overlay review and which don’t. If you’re combining an Ameristar door replacement with a second-story addition or window work in those neighborhoods, we plan for the overlay from the first site visit. That planning is why our Ameristar installs on hillside homes close tight against the marine fog instead of letting it whistle through the jamb.
Ameristar Models & Products We Service in San Bruno
We service the full Ameristar steel door line that shows up in San Bruno homes: the St. Laurent steel entry door series, the Guardian and Legacy entry door lines, and the Vantage and Acclaim storm and security door lines. We also work on Ameristar steel patio doors and side-lite assemblies. Parts-wise, we match Ameristar OEM hinge sets, sweeps, and weatherstrip kits where the frame is sound. When an OEM part is discontinued, we move to a quality aftermarket closer or threshold. We stock common sweeps and weatherstrip profiles for faster turnaround on San Bruno jobs, so you’re not waiting on a parts shipment while fog drifts through the gap.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in San Bruno
Most Ameristar door work in San Bruno falls into a few predictable ranges. Here’s how we price the common scopes:
| Service | Typical San Bruno Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
What drives Ameristar door repair cost is whether the slab or frame has rust-through, whether we’re reusing existing hardware or replacing the sweep and weatherstrip, and whether the opening has shifted from hillside settlement. A free estimate includes a look at the jamb, the sill pitch, and the exposure. Call (866) 472-1908 and we’ll give you a written line-item quote.
Serving San Bruno, CA — Our Local Coverage Area
We’re a General Contractor – San Bruno based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in San Bruno
Sometimes. In Belle Air and Rollingwood, certain door and window replacements trigger the airport noise overlay review if the assembly is part of a larger project touching a second story or changing the building envelope. A simple like-for-like entry door swap usually doesn’t trigger Part 77 review. Call (866) 472-1908 and we’ll tell you, before you pull a permit, whether your project is in the overlay zone.
San Bruno’s fog season keeps the bottom rail and sweep damp for months. Rust bleed shows up when the sill pitch is off or the sweep has compressed enough to hold water against the steel. The fix is replacing the sweep, correcting the sill drainage, and treating the rail before it rusts through. If it already has, replacement is the honest call. Call (866) 472-1908 for a free assessment.
Yes, where Ameristar still lists the hinge sets, sweeps, and weatherstrip kits. Some older Vantage and Acclaim hardware is discontinued, and in those cases we source a quality aftermarket closer or threshold that fits the original mounting pattern. We’ll tell you which way we’re going before any work starts.
Fog moisture and hillside settlement work together. The dampness softens wood jambs over time, and the settlement torques the rough opening, which loosens the closer and hinge hardware. Our installs account for both: we seal the jamb cavity against moisture intrusion and ease the hinge side to correct sag. Call (866) 472-1908 for an exact quote.
Yes. Since we run the whole project as one contractor, the door goes in on the schedule that makes sense with your kitchen or bath work, not as a separate visit—whether you need Ameristar service in Pacifica or right here in San Bruno. It’s one team, one permit coordinator, one warranty conversation. Call (866) 472-1908 to schedule a free estimate.
Service Areas Near San Bruno
We serve San Bruno and the surrounding communities from our base in San Bruno. That includes Ameristar service in South San Francisco, Ameristar service in Millbrae, plus Brisbane, Burlingame, and Colma. Same team, same approach, whether the job is on the flats or up a hillside. For the full list of neighborhoods we cover, see our San Bruno service area page.
Book Your Ameristar Service in San Bruno Today
On a Rollingwood split-level with a sloped parcel, our crew pulled a rusted Ameristar steel entry door whose bottom rail had been wicking fog moisture for years. We reset a new Ameristar slab with an upgraded sweep and weatherstrip so the jamb cavity stayed dry, then eased the hinge side to correct sag from the home’s hillside settlement. That entry now closes tight against the marine fog. Good construction doesn’t announce itself, it just works, year after year. Call (866) 472-1908 to schedule your free estimate, or reach out through our Ameristar sales & service page.
Written by Noel Carvalho, Owner at San Bruno Construction, serving San Bruno and San Mateo County.