Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | San Bruno Construction
We install, repair, and service Jerith ornamental aluminum and vinyl fencing across Mountain View as an independent contractor, not a manufacturer-authorized dealer. What sets our Jerith work apart here is that we know the downtown bungalow blocks well enough to lay out every run to the zoning line before the first post hole gets dug. If you own a Jerith fence in the 94035, 94039, 94040, or 94041 ZIP codes and it’s sagging, chalking, or pulling out of true, call (866) 472-1908 for a free estimate.
Why Mountain View Residents Choose Us for Jerith Service
Jerith builds a solid fence. But the difference between a Jerith that holds up for twenty years and one that needs constant attention usually comes down to what happens under the posts, at the gate, and along the grade change. Our crew has spent years working on the tight lots around downtown and Old Mountain View, where a 1908 cottage and a 1940s Craftsman sit three feet from the property line and the fence has nowhere to go except exactly where the zoning code says it can. Noel Carvalho, our owner, trained at Skyline College and has run residential projects across San Mateo County for over two decades. He’ll tell you straight: a Jerith fence installed without reading the setback variance is a fence you’ll be redoing. We don’t take that shortcut.
We keep OEM Jerith rack sections, pickets, posts, caps, and hinges matched to the original dimensions on every job. When OEM isn’t practical or a stainless upgrade stops repeat corrosion, we use quality aftermarket hardware and tell you why. The goal is never just to make the gate swing today. It’s to make sure you’re not calling us again for the same fix next spring.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Rack-and-pinion gates dropping out of alignment on sloped driveways. Mountain View’s older residential streets, especially around downtown and the Shoreline corridor, have driveways with real grade breaks. The rack bolts corrode after wet winters, the gate drops on its hinges, and suddenly it won’t latch. We reset the rack sections, square the gate to the slope, and swap the hardware to stainless so it doesn’t seize again.
- Powder-coat chalking on pickets along exposed corridors. Long dry summers and direct UV exposure beat on Jerith aluminum finishes, particularly on fences with no tree cover and no afternoon shade. We can tell you whether the chalking is cosmetic or whether the coating has broken down enough to warrant panel replacement before the aluminum starts pitting.
- Post base and footing problems in older bungalow yards. The 1900 to 1940s lots near Castro Street are full of mature tree roots, old hardscape, and termite-weakened wood near the fence line. Posts pinned too shallow into that ground start leaning within a few seasons. We reset footings to proper depth and check what’s actually holding the post.
- Rackable picket sections over-running on narrow lots. Downtown Mountain View lots are tight enough that a fence has to follow grade changes without crossing the setback variance line. If sections are over-run or the rack didn’t get cut to the grade break, the whole run looks off. We re-rack and reset so the line stays true and inside the legal boundary.
- Rusted hinges and seized hardware after wet winters. November through March rains in Mountain View are mild but persistent, and original Jerith hardware that wasn’t upgraded takes the brunt. Gates get stiff, then frozen. We replace hinges and rack bolts before the gate damages itself.
Jerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s the piece that separates Jerith work in Mountain View from the same job in Sunnyvale or Palo Alto. On the older downtown blocks off Castro Street, lots are tight enough that fence lines routinely press against setback limits and require a planning variance. That means a Jerith run here has to be laid out to the zoning line before a single post is set. You measure from the survey pin, account for the mature camphor or magnolia root flare, and confirm the variance with the city’s famously process-heavy permitting desk. Then you set. In the south and east slab-ranch tracts, you’ve got more room and the zoning conversation is simpler. But downtown, the constraint is real and it shows up in fences that bow inward, posts set two inches over the line, or gates that swing into a neighbor’s driveway apron. We’ve fixed all three.
On a 1920s bungalow block off Castro Street, we replaced a leaning, rusted Jerith aluminum picket gate system whose rack bolts had seized after a wet winter and whose posts were pinned too shallow into a yard full of mature tree roots. We reset the footings, squared the rack sections to the grade break, and swapped the gate hinges to stainless, then followed the tight setback line so the fence cleared the variance before final inspection. The homeowner got a true-swinging gate and a clean run without touching the neighbor’s property line.
Good construction doesn’t announce itself, it just works, year after year. That’s the standard we build to, and it’s the standard these old lots demand.
Jerith Models & Products We Service in Mountain View
We install and service the full Jerith aluminum and vinyl lineup you’ll find on Mountain View properties: the Decorator Series aluminum picket fence, the Provincial Series ornamental aluminum fence, the Baron Series aluminum fence, and Jerith’s vinyl privacy and picket lines. For repairs, we match OEM rack sections, pickets, posts, caps, and hinges to keep the system dimensionally true. When OEM isn’t available or a stainless upgrade will stop repeat corrosion in a Mountain View yard, we use aftermarket hardware and walk you through the reasoning. If you want to explore what Jerith offers before committing, our Jerith sales & service page breaks down the product families in more depth.
We repair when the failure is a single bent picket, a gate, or a hinge. But when a run has cross-bracing or powder-coat failure across multiple sections, we’ll recommend replacing the affected sections rather than patching and chasing the next failure in six months.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
Jerith fence work in Mountain View is quoted per linear foot, with the final number driven by grade changes, footing conditions, and whether the run sits inside a setback variance zone. A flat, open yard in the 94040 area costs less per foot than a downtown lot where every post has to be hand-dug around roots and a survey is required. Here are the market ranges we work within:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Paver Patio Installation | $3,500 – $11,000 |
Every estimate is free and line-itemed, so you can see exactly where the money goes before you sign anything. Call (866) 472-1908 and we’ll come out, look at the run, read the grade, and give you a number that holds.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Yes. We lay out the run to the zoning line before any digging starts, and we’ve handled the variance process on Castro Street area lots enough times to know what the city’s planning desk asks for. Call (866) 472-1908 and we’ll walk your specific lot with you, free.
In most cases, yes. The usual failure is corroded rack bolts and gate hinges that let the gate drop. We reset the rack sections, square the gate to the grade break, and upgrade the hardware to stainless so the same failure doesn’t come back next March. Exact cost depends on the gate width and how far it’s dropped, so call (866) 472-1908 and we’ll quote it on site.
If the chalking is isolated to a few pickets or one section, we replace just those panels and match the finish as closely as the existing coating allows. If the powder coat has failed across multiple sections and the aluminum underneath is pitting, full-run replacement is the better call. We’ll show you both options and let you decide with real numbers, not a sales push.
They can, mostly at the post bases and any wood rail or backer rail near the soil line. Aluminum fencing doesn’t feed termites, but the old wood and pier-and-beam conditions on 1900 to 1940s lots create uneven ground and weak anchorage points. We check the footing zone before we set posts and adjust depth and hardware accordingly.
Yes. We’ve coordinated Jerith aluminum fence runs with paver patios and driveway replacements across Mountain View, including phased schedules where the patio goes in first and the fence posts get set after. One General Contractor – Mountain View, one timeline, no finger-pointing between trades. Call (866) 472-1908 to schedule the estimate.
Service Areas Near Mountain View
Our Jerith service coverage extends beyond Mountain View across the Peninsula. If you’re in the San Bruno hills or down toward Millbrae, we handle those runs too. See our Mountain View service area page for full city coverage, plus service in Jerith service in Loyola and Jerith service in Sunnyvale if you’re just over the border.
Book Your Jerith Service in Mountain View Today
If your Jerith fence is leaning, chalking, or the gate won’t latch, don’t wait through another wet season. Call (866) 472-1908 and schedule your free estimate. We’ll come out, read the lot, and give you a straight answer on repair versus replacement.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Mountain View since day one.