Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Felton, CA | San Bruno Construction
We provide independent Jerith fence, gate, and railing service across Felton and the 95018 ZIP. The short version: San Bruno Construction installs and repairs Jerith Ascot, Providence, and handrail systems, and we’re one of the few contractors who can tell you how Cal Fire defensible-space review will treat your fence line before you spend a dime. We are not manufacturer-affiliated or authorized; we’re a full-scope general contractor in Felton with years of Jerith field work on Santa Cruz Mountains slopes. Call (866) 472-1908 for a free estimate.
Why Felton Residents Choose Us for Jerith Service
Felton isn’t a flatland town, and Jerith aluminum behaves differently here than it does in a valley subdivision. We’ve set posts on grades steeper than 30 percent, racked rails to follow a hillside contour, and replaced powder-coat that failed under ten years of redwood sun and winter downpour. That field time means we match panels, brackets, and caps to the existing profile instead of telling you to live with a mismatch. Noel Carvalho, our owner, grew up in San Bruno and trained in construction technology at Skyline College, where he learned to think through load paths and drainage before a single tool leaves the truck. That mindset matters when your fence line doubles as a drainage swale in a wet winter.
We carry Jerith OEM panels, posts, and brackets where available, and spec quality aftermarket aluminum hardware only for concealed connections you’ll never see. For Felton homeowners, that translates to repairs that look original and hold up through the next fire season. We coordinate the trades so you don’t have to. Whether it’s a fence, a gate, or railing tied into a bathroom or deck remodel, one contractor manages the full scope. Learn more about our broader Jerith sales & service work.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Felton
- Powder-coat chalking and redwood-tannin staining. Felton’s drought summers and heavy redwood litter bake and stain south-facing panels fast. We see it on Ascot and Providence runs within four to six years on exposed slopes. We’ll strip, prep, and refinish or replace affected sections with OEM-matched panels so the repair doesn’t announce itself as a patch job.
- Post footings heaved or undermined by concentrated runoff. Steep Felton lots channel winter rain into precise, destructive paths. A post set without accounting for that water gets undermined before the fence shows any other sign of wear. We reset footings with concrete tied into hillside drainage, not just a hole filled and forgotten.
- Racked rails and gate sag on hillside installs. Racking is standard on grades, but set posts too far apart on a slope and the gate frame twists within the first year. We set slope-corrected post spacing and re-hang sagging gates with OEM hinges and brackets rather than shimming and hoping.
- Galvanic corrosion at mixed-metal connections. Aluminum Jerith sections meeting older steel or untreated wood posts create a battery effect in Felton’s wet-dry cycle. Fasteners rot, powder-coat blisters, and sections loosen. We isolate dissimilar metals and replace the damaged hardware with compatible aluminum.
- Bent sections from tree fall and debris blowdown. Redwood duff and storm winds put branches through fence panels every few years on Felton properties. A bent rail or picket is usually salvageable at a fraction of replacement cost, but a compromised post line means full replacement. We give you an honest read on which one it is before quoting anything.
Jerith Service in Felton: What Local Conditions Mean for Your Equipment
Here’s the Felton-specific truth that generic Jerith pages never touch. After the CZU Lightning Complex fire, every rebuild and most fence replacements in the 95018 corridor run through Cal Fire WUI plan review. Fence and railing lines near the structure count in defensible-space layouts, and wood fencing gets flagged as a fuel source. That’s why Jerith aluminum keeps getting chosen in Felton over cedar or redwood: it won’t carry ember load, won’t rot in the constant redwood-duff moisture, and it reads as non-combustible to a reviewer. On a sloped parcel off Felton-Empire Road, our crew replaced a leaning wood fence line with Jerith Ascot aluminum panels, reset posts on concrete footings tied into the hillside drainage, racked rails to follow the grade, and re-hung a sagging gate with OEM hinges and brackets. The homeowner passed the defensible-space walkthrough without the fence flagged. That’s the bar in Felton now, and we build to it.
Jerith Models & Products We Service in Felton
We service the Jerith Ascot aluminum residential fence, the Providence picket line, and Jerith aluminum handrail and guardrail systems, including decorative gates and arbors. Most Felton installs use the mid-profile picket designs, which hold up better to wind and slope than taller privacy panels. When panels are still square and the post line is sound, we replace only the damaged sections. When footings are shot or the rail profile has been discontinued, we’ll source the closest OEM match or spec a full section replacement rather than forcing a mismatch. This is the same standards-driven approach we bring to every Felton service area job.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Felton
Jerith aluminum work in Felton prices like mountain work, not flatland work. Steep access, drainage mitigation, and WUI-specific detailing all move the number. Here’s what similar projects typically run:
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Post resetting on a hillside, WUI-compliant detailing, and gate re-hanging are quoted after we walk the property. Every estimate is free, written as a line-item quote, and tied to the conditions we actually see in Felton, not an aerial photo. Call (866) 472-1908 and we’ll schedule the walkthrough.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Felton
Yes, in most cases Jerith aluminum fencing passes defensible-space review more cleanly than wood fencing because it’s non-combustible and doesn’t carry ember load. The specific placement of your fence line relative to structures still matters, so we map it during the estimate and flag any sections a Cal Fire reviewer would question. Call (866) 472-1908 to have us walk your property.
Yes, and we’ve done it repeatedly. The key is slope-corrected post spacing and racked rails that follow the grade, plus concrete footings tied into the hillside drainage. A flat install on a steep pitch will twist and sag within a year. We quote the hillside work, not a pretend flat quote.
Felton’s drought summers bake south-facing panels, and redwood litter and tannins stain the coating within a few seasons. It’s a climate-driven failure, not a product defect. We strip, prep, and refinish or replace affected sections with OEM-matched panels, and we’ll tell you whether refinishing will last or a replacement makes more sense. Call (866) 472-1908 for an exact quote; estimates are free.
Yes. When a bathroom or deck remodel in Felton includes railings, we coordinate the Jerith railing work under the same contract and schedule, so you’re not chasing a separate fence contractor. We service Jerith handrail and guardrail systems and match the existing profile where the run continues.
Usually yes. A bent gate frame, sagging hinges, or a twisted post cap is repairable with OEM hinges, brackets, and panels. Full replacement only makes sense when the post line itself is compromised or the rail profile is long discontinued. We’ll give you the straight repair-vs-replace call before we quote anything. Estimates are free at (866) 472-1908.
Service Areas Near Felton
We serve Felton and the surrounding mountain corridor, plus the broader San Mateo County peninsula. That includes San Bruno, South San Francisco, Millbrae, Brisbane, Burlingame, and Colma. For fence and railing work just over the hill, see our Jerith service in Mount Hermon page. For the Scotts Valley side of the grade, see Jerith service in Scotts Valley.
Book Your Jerith Service in Felton Today
If you’re in Felton and your Jerith fence or railing is chalking, sagging, or failing a defensible-space walkthrough, call (866) 472-1908. We’ll schedule a free walkthrough, give you a written line-item quote, and tell you honestly whether it’s a repair or a replacement.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Felton and the Santa Cruz Mountains since 2003.