Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Santa Cruz, CA | San Bruno Construction
We’re San Bruno Construction, an independent contractor that installs and repairs Jerith aluminum and vinyl fencing across Santa Cruz County. The one thing that makes our Jerith work here different is that we understand coastal permits and raised beach foundations before a single post goes in. Call (866) 472-1908 for a free estimate from a crew that knows Jerith fence systems and Santa Cruz’s coastal building rules equally well.
Why Santa Cruz Residents Choose Us for Jerith Service
Jerith fencing shows up all over Santa Cruz: aluminum picket runs along East Cliff Drive, vinyl privacy panels screening backyards in Live Oak, and code-compliant pool fences around Westside homes. We’ve installed and repaired these systems for years, which means we recognize the difference between a Jerith OEM picket and a knockoff at a glance, and we know which post anchors hold in sandy coastal soil versus the clay you’ll find in the hills around Mount Hermon.
As an independent Jerith service provider, we’re not manufacturer-authorized or affiliated, but that independence works in your favor. We spec Jerith OEM replacement panels and brackets whenever the profile is still current, and we don’t upsell a full replacement when three pickets and a post can be repaired. Noel Carvalho, our owner, trained in construction technology at Skyline College and has spent more than two decades running residential projects across the Bay Area and Santa Cruz County. He’ll tell you straight what your fence needs, what it doesn’t, and what the coastal permit reviewer will flag before you spend a dollar.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Santa Cruz
- Salt-air corrosion on aluminum pickets and fasteners. Within blocks of Twin Lakes and Pleasure Point, marine moisture attacks the factory finish and hardware faster than anywhere inland. We see pitting and chalking on Jerith Aluminum Ornamental Fence runs that are only five or six years old, especially where sprinkler overspray hits the base rail.
- Post footing failure on raised beach cottages. Original posts on older Jerith installs near the coast were often set shallow in sand with no engineered concrete collar. After one or two wet winters, the posts rack and the fence leans. We fix these with deeper footings engineered for the coastal flood zone, then document everything for the permit inspector.
- Vinyl panel sagging on sloped lots. Jerith Vinyl Privacy Fence panels distort when the fence line was run level across a sloped Santa Cruz lot instead of stepped. You’ll see gates dragging and pickets bowing under marine-layer temperature swings. We re-rail and re-hang the sections so they track true.
- Wind-driven rain and fog intrusion at post caps and rail brackets. Coastal moisture works its way into post caps and rail brackets on older Jerith aluminum runs, then tracks down into the post and rusts the internal stiffener. This is a slow failure mode that shows up as rust streaks below the cap or a rocking rail.
- Ground-floor additions triggering foundation upgrades. Many pre-1980 beach cottages near Twin Lakes and Pleasure Point sit on raised post foundations. When a Jerith fence ties into a home addition, newer flood and seismic rules often force a full foundation upgrade before the fence permit can close. We coordinate that scope so the fence doesn’t become the project’s bottleneck.
Jerith Service in Santa Cruz: What Local Conditions Mean for Your Equipment
Santa Cruz’s coastal development permit process changes what a fence replacement actually involves. The 50-foot coastal height limit and slow-growth Measure O caps (that’s the 2018 measure, not the older one) mean any fence line within the coastal zone must be shown to sit outside the permitted development envelope before a post can be set. In practice, a Jerith repair in Twin Lakes on a beach cottage gets reviewed alongside flood and geologic requirements, and the inspector wants to see footing depths documented. On a raised beach cottage off East Cliff Drive, our crew found the original Jerith aluminum fence posts had corroded at the base and were leaning because the shallow footings sat in sand above the flood plane. We pulled the old posts, set new galvanized anchors into deeper concrete collars engineered for the coastal flood zone, and replaced the rusted pickets with Jerith OEM panels, then documented the footing depths for the coastal permit inspector. The fence now stands plumb and passes the same flood-review scrutiny that would have stopped a less prepared crew. That’s the difference between knowing Jerith fence systems and knowing Santa Cruz.
Jerith Models & Products We Service in Santa Cruz
We work on the full Jerith lineup that shows up in Santa Cruz backyards: Jerith Aluminum Ornamental Fence in standard picket and 2-rail styles, Jerith Vinyl Privacy Fence (the 6-foot tongue-and-groove panels you see screening side yards in Live Oak), Jerith Aluminum Pool Code Fence, and Jerith Vinyl Picket Fence. When a profile is still current, we use Jerith OEM replacement panels, pickets, and brackets so the fence stays consistent and warranty-eligible where applicable. For discontinued lines, we source quality aftermarket components that match the original gauge and finish. We stock common Jerith pickets, post caps, and rail brackets for fast turnaround on Santa Cruz repairs, so you’re not waiting on a slow special order for a simple corrosion fix.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Santa Cruz
What you’ll pay for Jerith fencing work in Santa Cruz depends on three things: the length of the run, the condition of your existing footings, and whether the fence sits in the coastal zone and needs permit review. Coastal permits and engineered footings on raised beach cottages add cost, but skipping them costs far more when the inspector flags work that was never documented. Every estimate we give is free, written, and line-itemed so you see exactly where each dollar goes. No change orders because we didn’t check the permit map first. Call (866) 472-1908 for your exact number.
| Service | Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Driveway Replacement | $5,000 – $14,000 |
Serving Santa Cruz, CA — Our Local Coverage Area
We’re based in the Santa Cruz area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Santa Cruz
You likely do if the fence is within the coastal zone, which covers most of Twin Lakes, Pleasure Point, Capitola, and the beachfront areas of Santa Cruz. The 50-foot coastal height limit and Measure O caps mean fence replacements are reviewed as part of the development envelope, and we handle that paperwork as part of the job. Call (866) 472-1908 and we’ll check your parcel’s coastal status before quoting.
Aluminum runs near the coast corrode at the fasteners and post bases first, showing pitting and chalking within five to seven years if sprinklers or salt spray regularly hit the fence. Vinyl doesn’t corrode, but marine-layer temperature swings can distort panels that weren’t stepped correctly on sloped lots. We spec aluminum with upgraded stainless fasteners near the coast and step vinyl runs to match grade.
Yes, and that’s exactly the kind of work we’d rather do than a simple post-hole dig. Raised beach cottages often sit on post foundations above the flood plane, so fence posts need deeper concrete collars and galvanized anchors engineered for coastal flood review. We document the footing depths for the permit inspector, because Santa Cruz code enforcement checks.
Sectional corrosion repair on a Jerith aluminum fence in Santa Cruz typically runs from $400 to $1,800 depending on how many pickets and posts are involved, with isolated repairs far less than a full run replacement. If footings are compromised or more than a third of the run is failing, we’ll recommend a full replacement instead of chasing failures post by post. Call (866) 472-1908 and we’ll give you a line-itemed number in writing.
We do. Unincorporated county areas like Bonny Doon and parts of the North Coast have their own coastal review process, and we submit Jerith fence permits under the same scrutiny as in the city of Santa Cruz. We pull the permit, schedule the inspection, and stay on site until the job passes.
Service Areas Near Santa Cruz
In addition to Santa Cruz, our Jerith fence crews take on work across Santa Cruz service area, including Live Oak, Soquel, and the nearby Bay Area communities we serve from our San Bruno home base. If you’re in Live Oak, see our Jerith service in Live Oak page for neighborhood-specific details, and for the Soquel side, our Jerith service in Soquel page covers the permit quirks there. For the full picture on our Jerith expertise, visit Jerith sales & service.
Book Your Jerith Service in Santa Cruz Today
If your Jerith fence is leaning, corroding, or dragging at the gate, we’ll come take a look. Call (866) 472-1908 to schedule your free estimate. We serve Santa Cruz one fence line at a time, and we get it right the first time because we know exactly what the coast and the permit office will throw at it.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Santa Cruz and the Bay Area. Good construction doesn’t announce itself – it just works, year after year.