Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lompico, CA | San Bruno Construction
We install and repair Belgard in Brookdale, Lompico, and nearby areas, handling pavers, wall block, and hardscape systems, and we’re independent of the manufacturer, which means our recommendations are about what actually holds up on these slopes, not what moves product. The piece most out-of-town installers miss: Lompico’s narrow, soft private lanes change how a Belgard job gets staged, because a loaded pallet truck often can’t reach the site at all. Call (866) 472-1908 to schedule a free estimate, and we’ll walk your lot before we quote a number.
Why Lompico Residents Choose Us for Belgard Service
We’ve been laying Belgard on Lompico’s steep, tree-shaded lots long enough to know these systems behave differently up here. Belgard sales & service is only as good as the base under it, and on a hillside that drains all winter after a fire-cleared summer, the base is everything. Noel Carvalho, our owner, grew up in San Bruno and trained in construction technology at Skyline College, so he reads load paths and drainage before a single paver gets pulled off a pallet. That matters when you’re building anything on a grade.
We’re a full-scope general contractor, which means the same crew coordinating your Belgard patio can tie it into the drainage, retaining, and access work the rest of your property needs. One contractor, one point of contact, one contract. No juggling a paver company, a grading guy, and a landscape crew who won’t talk to each other. And when you call us about Belgard repair in Felton or Lompico, you get someone who knows whether your Mega-Lafitt wall can be re-based or whether the units themselves are too far gone.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Lompico
Here’s what we see most often on Lompico properties, and why it happens here more than on flat ground:
- Base failure and paver settling. The classic Lompico driveway washout. Belgard units get laid over shallow, uncompacted gravel on a slope, then the first atmospheric-river storm saturates everything, the base moves, and the field heaves. We rebuild these with proper excavation, compaction, and a geotextile-lined base so water passes through instead of taking the pavers with it.
- Efflorescence and chalky joints. White mineral staining on pavers that stay damp under redwood canopy and never fully dry. North-facing hillside patios in Lompico see this constantly. It’s not a product defect; it’s a moisture and drainage condition, and we correct the water path, re-sand the joints with quality polymeric sand, and restore the finish.
- Segmental retaining wall lean. When Belgard Anchor Highland Stone or Mega-Lafitt blocks were stacked without geogrid tie-backs or proper drainage aggregate behind them, uphill groundwater pushes the wall forward over a few wet seasons. We rebuild the wall with the reinforcement and drainage the original install skipped.
- Edge restraint failure and paver creep. On steep private driveways, heavy loads plus runoff spread the field outward and open the joints. The edge restraint fails silently, then the whole driveway follows. We install proper edging and take the grade seriously when we re-lay the field.
- Fire-clearing damage. When a Lompico lot gets cleared for defensible space, heavy equipment and chipped vegetation can disturb the perimeter of a Belgard patio or driveway. We assess what’s salvageable and re-set or replace as needed.
Belgard Service in Lompico: What Local Conditions Mean for Your Equipment
Here’s the Lompico reality most paver contractors from over the hill don’t plan for: many of the private lanes and driveways off Lompico Creek Road and similar mountain accesses are too narrow or too soft for a loaded concrete or material truck. A flat Santa Cruz lot takes a delivery. Lompico doesn’t. Our crews routinely stage Belgard pallets at the bottom of the grade and shuttle loads up in smaller runs, which changes the whole sequencing of a job. Base prep timing, material staging, access planning, and even where we park our own trucks get built into the estimate. If your Lompico property sits at the end of a one-lane private road with a soft shoulder, we already know before we quote that the job will cost more in labor and take longer in delivery, and we’ll tell you that up front instead of discovering it on day one. That’s not a complication; it’s just how Belgard in Mount Hermon and Lompico work gets donerrectly up here.
One job sticks in our memory: a steep, redwood-shaded lot off a narrow private lane where years of runoff had heaved a Belgard Catalina paver patio. Pallets staged at the bottom, shuttled up in small loads, our crew excavated to full depth, rebuilt the base with compacted aggregate and geotextile, reset the units on proper edge restraint, and cut a new drainage swale so the hillside water finally had somewhere to go. That patio is still flat three winters later.
Belgard Models & Products We Service in Lompico
We work across the Belgard lines that show up most often in Lompico: Mega-Lafitt and Mini-Lafitt wall block, Catalina and Holland Stone pavers, Weston Stone and Urbana Stone pavers, and Anchor Highland Stone wall block. When an existing field needs a repair match, we source genuine Belgard units so the patch doesn’t look like a patch. The hidden components, base aggregate, geogrid, polymeric joint sand, edge restraint, are where a hillside install lives or dies, so we use quality aftermarket materials there and stand behind them. We’ll tell you straight when a Belgard patio or wall can be re-based and re-laid versus when the units are too heaved or spalled to save and replacement is the smarter money.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lompico
What does Belgard construction cost in Lompico? Here are the ranges for the work we most often handle on these mountain lots:
| Service | Typical Cost Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
What moves your number: access, grade, how much excavation the base needs, and whether we’re matching existing units or starting fresh. Every estimate includes a site walk, a written line-item quote, and honest advice about what needs doing versus what can wait. Call (866) 472-1908 for your free estimate.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lompico
Yes, when it’s built correctly. A Belgard paver driveway works on a steep Lompico grade if the base is excavated deep enough, properly compacted, and reinforced with geotextile, and if edge restraint holds the field. What fails up here is shallow base prep, never the pavers themselves. Call (866) 472-1908 and we’ll look at your specific lane and grade.
That’s efflorescence, mineral salts wicking up through the pavers because they stay consistently damp under Lompico’s redwood canopy, especially on north-facing slopes. The fix is drainage correction first: give the water a path away from the field, then clean and re-sand the joints. The chalk won’t stop coming back until the moisture does. Call (866) 472-1908 for a free assessment.
Often not on a standard truck, and we plan for that. If your lane is narrow, soft, or has a tight switchback, we stage pallets at the bottom and shuttle materials up in smaller loads. It affects labor and timeline, but it also keeps a fully loaded truck from getting stuck halfway up your road. We’ll tell you which category your lot falls into during the estimate.
Look at the block face and the lean. If the wall is bulging but the units are intact, it can usually be deconstructed, re-based with proper drainage aggregate and geogrid tie-backs, and rebuilt. If the blocks are spalled or cracked through, replacement is cheaper than salvaging. We’ll give you a straight call either way. Call (866) 472-1908 to get eyes on it.
It can. Clearing equipment running along the perimeter of a Belgard field can disturb edge restraint and compact the base unevenly. Chipped vegetation left against pavers traps moisture and accelerates efflorescence. After a clearing project, have us inspect the edges and drainage before the next wet season. Estimates are free at (866) 472-1908.
Service Areas Near Lompico
We serve Lompico and the surrounding Santa Cruz Mountains and San Mateo County communities, including Belgard service in Ben Lomond, Belgard service in Bonny Doon, and the wider Lompico service area. If you’re up a private lane or at the end of a fire road, we’ll still come take a look.
Book Your Belgard Service in Lompico Today
Get a free, no-pressure Belgard estimate from a contractor who understands what Lompico’s slopes and private roads actually require. Call (866) 472-1908 to schedule a site walk with Noel Carvalho and our team. We’ll give you straight numbers and a plan that holds up.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Lompico and the Santa Cruz Mountains since 2003.