Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Upland, CA | San Bruno Construction
San Bruno Construction installs and repairs Tremron pavers, driveways, patios, and retaining walls across Upland. The one thing that makes our Tremron work here different: we know Upland splits into two distinct construction realities, the 91784 foothills under Chapter 7A fire-zone rules and the flatland citrus-era ranch lots on expansive clay, and we build each one differently. We’re an independent Tremron installer, not factory-authorized, so the recommendation you get matches your address, not a brand rep’s quota. Call (866) 472-1908 for a free estimate on any Tremron project in Upland.
Why Upland Residents Choose Us for Tremron Service
Noel Carvalho runs San Bruno Construction the way he learned to build: read the site before a single paver leaves the pallet. He trained in construction technology at Skyline College in San Bruno, where the hands-on program drilled plans, load paths, and site drainage into him long before he ever pulled a permit. That early discipline is exactly what Tremron work on Upland lots demands. We’ve installed Tremron Mega Olde Towne, Olde Towne, and Tuscany pavers plus Chesapeake Wall block on foothill slabs and flatland ranch parcels alike, and we’ve torn out enough failed Tremron work to know precisely which corners get cut. We stay local to Upland’s ZIP codes, 91784, 91785, 91786, so our crews don’t lose half the day in traffic and our understanding of your subgrade isn’t a guess. We use Tremron’s own units for the visible surface and specify third-party geotextile, open-graded base, polymeric joint sand, and noncombustible edge restraint matched to what Upland’s soil and fire zones actually demand. See our full Tremron sales & service scope and our Upland service area for coverage details. Good construction doesn’t announce itself, it just works, year after year.
Styles & brands we work with
Common Tremron Construction Problems We Solve in Upland
- Efflorescence and joint-sand loss on Tremron pavers where flatland citrus-lot base wasn’t drained. Upland’s winter rainy season is short but intense. On older ranch lots, the original site drainage was built for citrus rows, not patio hardscape, so water sits under the pavers and pushes white mineral staining up through the joints. We re-cut drainage before touching the surface, then re-sand with polymeric material that locks tighter than builder’s sand.
- Edge restraint failure and paver migration on sloped 91784 foothill driveways. Santa Ana winds aren’t the only force on the foothill side; storm runoff off the San Gabriel Mountains moves fast across a graded pad. When the edge restraint is plastic snap-edging instead of a noncombustible concrete curb, the outer course of a Tremron driveway starts to wander within two seasons. We rebuild the edge before we reset the field.
- Retaining-wall block creep and joint separation in Tuscany and Chesapeake walls. Upland sits on clay-rich soils that swell through wet winters and shrink through dry summers. A wall holding back a graded pad on an older foothill property feels that movement every year. We see blocks that have separated a quarter-inch at the quarter points because the wall was built without proper drainage and geogrid. The fix starts behind the wall, not at the face.
- Shifting and rutting over shallow buried orchard irrigation and citrus roots. Pre-war and mid-century Upland homes were built on land that fed citrus for decades before anyone poured a patio. Old irrigation lines decay underground and roots rot, leaving voids that base rock drops into. Unless the old root zone is cleared and the subgrade re-compacted, even a correctly laid Tremron surface will dip within a few years.
- Fire-zone detailing gaps on foothill projects. A flatland contractor who doesn’t work 91784 will lay the same Tremron assembly up the hill as they did on Euclid. Around the foothill streets, that misses Chapter 7A requirements for noncombustible edge restraint and ember-resistant base detailing. We write those details into every foothill project from the first estimate.
Tremron Service in Upland: What Local Conditions Mean for Your Equipment
Upland’s 91784 foothill parcels sit in designated high fire severity zones, so a Tremron paver patio, walkway, or driveway apron on those lots must be detailed to WUI/Chapter 7A ignition-resistant standards. That means noncombustible edge restraint and ember-resistant base detailing. The identical Tremron installation on a flatland citrus-lot parcel a mile downhill does not carry that requirement. Same pavers, same brand, same crew. Different assembly. Most of Upland’s core is 1920s to 1970s single-story ranch and Craftsman-influenced housing on deep citrus-era lots, with newer hillside tracts up in 91784. Construction here is additions, ADU conversions, and structural retrofits of older wood-frame homes, not greenfield subdivision builds. For a Tremron owner, that means the subgrade you’re building on is probably older than you are, and it remembers the orchard it used to be. On a hillside lot off the 91784 foothill streets, we tore out a heaved Tremron Olde Towne paver patio where the original installer had set base straight over an old graded pad with no drainage. The winter rains had pumped clay fines up through the joints. We re-excavated to a free-draining open-graded base, tied in a French drain off the slope, switched to noncombustible edge restraint to meet the fire-severity-zone detailing, and re-laid the pavers with polymeric joint sand. The surface has stayed put through two rainy seasons. That’s the difference between knowing Tremron products and knowing Upland.
Tremron Models & Products We Service in Upland
We install and repair the Tremron lines that actually show up on Upland jobs. Tremron Mega Olde Towne pavers for driveways where the vehicle load is heavy. Olde Towne pavers for patios and walkways with a classic modular look. Tuscany pavers where homeowners want a tumbled, softer edge. Chesapeake Wall block for retaining walls and seat walls, especially on sloped pads. We keep common repair stock staged for faster Upland turnaround: replacement paver units, polymeric joint sand, geotextile, and edge-restraint material. For the visible surface, we use Tremron’s own units. For what’s underneath, we specify third-party geotextile, open-graded base, and noncombustible edge restraint matched to your lot’s clay and fire-zone conditions. The surface brand alone doesn’t determine whether a job holds.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Upland
What you’ll pay depends on what’s under the surface as much as what’s on top. A simple flatland patio on stable subgrade runs differently than a foothill driveway that needs re-excavation, drainage, and Chapter 7A detailing. Here’s what current Upland projects look like:
| Project | Typical Upland Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
Every estimate is free and comes as a written line-item quote, so you see the base work, drainage, and edge restraint broken out separately. Call (866) 472-1908 for an exact number on your Upland lot, and we’ll walk the site before we quote.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well, with San Antonio Heights Tremron service and coverage throughout the region. Use the map below to see our full service area — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Upland
Yes. A patio or driveway apron in the 91784 foothills must be detailed to WUI/Chapter 7A ignition-resistant standards, which means noncombustible edge restraint and ember-resistant base detailing. The same Tremron paver on a flatland citrus-lot parcel a mile downhill does not carry that requirement, unlike our Rancho Cucamonga Tremron service area where foothill rules may apply. The surface units are the same; the assembly underneath is different. Call (866) 472-1908 and we’ll tell you which one applies to your address.
Because the base was built over what the lot used to be: a citrus orchard. Old irrigation lines rot, roots decay, and clay soils swell through Upland’s wet winters, all of which creates voids and movement under the pavers. Unless the old root zone is cleared and the subgrade re-compacted, even a new Tremron surface will dip. We re-excavate and rebuild the subgrade before we re-lay the pavers. Call (866) 472-1908 for a free site assessment.
Yes, if it’s engineered for the soil it’s holding. Tremron Chesapeake Wall block works well on Upland hillside lots when it’s built with proper drainage behind the wall, geogrid reinforcement where the grade is steep, and a footing that accounts for clay expansion, and we also provide Tremron repair in Montclair for similar hillside conditions. A wall that’s dry-stacked without drainage will creep and separate at the joints within a few seasons. We build the wall system, not just the block face. Call (866) 472-1908 for an exact quote on your slope.
We install Tremron Mega Olde Towne pavers for driveways with heavier vehicle loads, Olde Towne pavers for patios and walkways, Tuscany pavers for a tumbled, softer look, and Chesapeake Wall block for retaining walls and seat walls. We also carry replacement units and repair materials for these lines staged for faster Upland turnaround. If you have a Tremron line we haven’t listed, call (866) 472-1908 and we’ll tell you if we can source it and service it.
Often yes, and it’s a good thing if you plan the hardscape and structure together. On Upland’s deep citrus-era lots, a paver patio or driveway apron often sits exactly where an ADU or addition needs site access, drainage, and grading. Coordinating the Tremron hardscape with the addition means one excavation, one drainage plan, and one contractor accountable for both, including Tremron service in Claremont and surrounding areas. We handle that scope under one contract. Call (866) 472-1908 to talk through your whole project.
Service Areas Near Upland
We serve Upland directly and take Tremron projects in surrounding communities along the foothill corridor and inland valleys. You’ll find our crews in Tremron service in Fullerton, Tremron service in Stanton, Rancho Cucamonga, Ontario, Claremont, and Montclair. If you’re near the San Gabriel foothills in any of those areas, the subgrade and fire-zone conditions are similar enough that our Upland experience carries over.
Book Your Tremron Service in Upland Today
Call (866) 472-1908 to schedule your free Tremron estimate in Upland. We’ll walk your lot, check the subgrade and drainage, and give you a written line-item quote before any work starts.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Upland since the company was founded.