Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Home Remodeling Across Ben Lomond
Home remodeling in Ben Lomond runs $9,000 to $130,000 depending on scope, and the work here is different from what happens in the valley towns below. A kitchen remodel typically lands between $14,000 and $45,000, a bathroom between $9,000 and $28,000, and a full home addition from $45,000 to $130,000. The cost difference comes from what Ben Lomond lots actually are: steep, tree-canopied, and subject to Santa Cruz County’s fire-safe and geotechnical review. We work on Highway 9 parcels and the side roads off it every month, so we know what a compliant quote has to include here. Call us at (866) 472-1908 to get one.
Why San Bruno Construction Is Ben Lomond’s Preferred Home Remodeling Company
Ben Lomond homeowners keep calling us back because we show up knowing what the county will ask for. Noel Carvalho runs our operations, and he’s walked more hillside lots in the 95005 zip than he can count. When a remodel on a steep parcel near the San Lorenzo River valley needs a geotech report before excavation, we already know it’s coming. When an older cabin on a pier-and-beam foundation needs re-leveling before new cabinetry goes in, that’s in our bid from day one, not a surprise change order later.
Our customers in Ben Lomond appreciate that we don’t treat their remodel like a flatland job. We coordinate the trades so you don’t have to. One contractor, every phase, from countertops to rooflines to ADUs. That’s the whole point of working with a full-scope general contractor up here.
Styles & brands we work with
Home Remodeling Companies in Ben Lomond
Home Remodeling Companies in Ben Lomond are not all set up for what this town actually requires. A legitimate one understands that permits route through Santa Cruz County with fire-safe and geotechnical review layered on top of standard building inspection. A hillside lot on a redwood root zone can trigger a geotech report and defensible-space detailing that a flat parcel in Scotts Valley or Felton never sees. That extra scrutiny is why a compliant quote here carries line items like root-zone protection, tree-fall and debris load assumptions, and fire-rated assemblies that cheaper bids leave off entirely.
The job here is rarely just one trade. You’re often dealing with a mid-century cabin that needs wiring updated, a stepped foundation leveled, and a roof edge rebuilt before the pretty stuff goes in.
Coordinated Trades, One Contract
We run the whole project under one agreement. Framing, rough-in coordination, finishes, exterior work, and the permit and inspection schedule. You’re not calling four separate companies and hoping they line up.
Material Selection Without the Guesswork
You pick from real options, not whatever the contractor prefers to install. Cabinet lines from KraftMaid and Wellborn, countertops from Cambria and Silestone, plumbing fixtures from Kohler, Moen, and Toto. The selection process is part of the job, and we walk you through it.
Whole House Remodel in Ben Lomond
A Whole House Remodel in Ben Lomond means taking an older mountain home down to the studs and rebuilding it for the way families actually live now. The work involves structural repairs, new mechanical rough-in, insulation, drywall, flooring, kitchens, bathrooms, windows, and often exterior upgrades like roofing and siding. Because so many Ben Lomond homes are mid-century or earlier, the project usually starts with what’s hidden: knob-and-tube wiring, rotted deck ledgers, and foundations that have shifted on grade.
We’ve taken a steep Highway 9 parcel under heavy redwood canopy down to the studs: re-leveled the stepped foundation, replaced a rotted deck ledger, and ran a full rough-in for new wiring and plumbing before the county inspector signed off on framing and fire-hardening. We specified a KraftMaid kitchen with Cambria counters and Moen fixtures, and detailed the roof edges and gutters so redwood litter and winter fog drainage wouldn’t start the rot cycle again.
Structural and Systems Work First
On a hill, the structure comes before the finishes. Foundation re-leveling, shear wall upgrades, and drainage corrections get done before a single cabinet is ordered. That’s the right sequence, and it’s the only sequence that passes inspection up here.
Finishes Built for a Mountain Climate
Ben Lomond’s heavy winter rain and fog mean finish choices matter. Cabinetry and flooring have to handle moisture swings, and exterior details need to shed water and redwood duff fast. We select materials with that in mind, not just for how they look in a showroom.
Trusted Brands We Service in Ben Lomond
We work with over 50 vetted product brands across every major renovation category, so your budget decisions are never forced. For Ben Lomond homes, that means specifying products that hold up to wet winters and wildfire exposure. Dvele and Plant Prefab give us ADU and prefab options that most residential remodelers cannot offer, and their factory-built envelopes handle the moisture and fire-resistance demands of a mountain site better than stick-built in a lot of cases. We also stock common replacement parts for Kohler, Moen, and Delta fixtures locally, which shortens turnaround when a finish gets swapped mid-project.
See the difference
Before
After
Before
After
Before
AfterCommon Home Remodeling Problems We See in Ben Lomond Homes
- Redwood root-zone restrictions on excavation. Protected trees and their root systems limit where you can dig. A homeowner who doesn’t get an arborist and geotech review before excavation can get red-tagged by the county mid-rough-in.
- Rotted deck ledgers and roof edges from redwood litter and fog. Heavy redwood duff traps moisture against wood for months. Decks and roof edges rot fast, and any remodel that doesn’t address drainage around them inherits the problem.
- Outdated wiring and plumbing in mid-century cabins. A lot of Ben Lomond housing stock predates modern electrical loads. Opening walls for a kitchen remodel often reveals wiring that has to come out before the county will sign off.
- Stepped pier-and-beam foundations that have shifted on grade. Hillside construction settles unevenly. Cabinets won’t sit level, doors won’t close right, and if the foundation isn’t corrected first, every finish installed on top of it will fail early.
Pricing for Home Remodeling in Ben Lomond, CA
A compliant quote in Ben Lomond includes line items that a cheap flatland bid leaves out: root-zone protection, tree-fall and debris load detailing, fire-rated assemblies, and geotech review when the slope or canopy requires it. That’s why honest ranges matter more than a single low number. Here are the market ranges we see across the 95005 zip:
| Project | Typical Range in Ben Lomond |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Home Addition | $45,000 – $130,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
What moves the number is scope and site conditions. A kitchen on one level of a pier-and-beam cabin costs less than one that requires foundation work and a full rough-in replacement. A hillside addition that triggers geotech review and fire-hardening costs more than the same square footage on flat ground. We give written line-item quotes so you can see exactly what’s included. Call (866) 472-1908 for a free estimate.
We Also Serve Cities Near Ben Lomond
Our Home Remodeling team covers the entire San Lorenzo Valley corridor. If you’re in Lompico, Brookdale, Felton, or Mount Hermon, we handle remodels there with the same county permit knowledge and the same coordinated-trades approach. Home Remodeling in Ben Lomond is our focus, but the neighbors up and down Highway 9 get the same treatment.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Home Remodeling in Ben Lomond
We schedule Ben Lomond site visits within a few business days, and once a project starts, our crews are on site daily until it’s done. We don’t run jobs across four counties at once. Call (866) 472-1908 to get a site walk on the calendar.
Yes, we work throughout the 95005 zip, including the streets off Highway 9, the San Lorenzo River valley side, and the upper hillside parcels near the ridge. If the county will permit it, we’ll build it.
Yes. A documented paper trail showing fire-rated assemblies, defensible-space detailing, and passed county inspections gives your insurer verified compliance. That can support a premium reduction and it removes the “was this built to code” question if you ever file a claim. We hand over the full inspection record at closeout.
They can, and the reason is site conditions. A hillside parcel on a redwood root zone with wildfire-interface requirements carries permit and inspection costs that a flat valley lot in Felton doesn’t trigger. The difference shows up as specific line items, not vague markup.
We stand behind our workmanship in writing, and the product brands we install carry their own manufacturer warranties. We make the terms clear in the contract before work starts. Call (866) 472-1908 for the details on a specific project.
If you’re planning a remodel in Ben Lomond, don’t guess at what the county will require. Call (866) 472-1908 to schedule a free estimate. We’ll walk your lot, check the site conditions, and give you a written line-item quote that includes what this town actually demands.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Ben Lomond and the San Lorenzo Valley since day one.