KraftMaid Construction in Mountain View, CA

KraftMaid Construction in Mountain View, CA | San Bruno Construction

We install, reface, and repair KraftMaid cabinetry throughout Mountain View, ZIP codes 94040 through 94043, and also offer KraftMaid repair in Los Altos. What separates us from a generic cabinet installer? We’re an independent KraftMaid service provider – not manufacturer-affiliated or authorized – and we know how KraftMaid boxes behave on the pier-and-beam floors and slab foundations that define this city’s housing stock. Since 1980s downtown bungalows and 1960s ranch tracts settle differently, the same KraftMaid line needs different handling depending on which side of El Camino Real you live on.

Call (866) 472-1908

Call (866) 472-1908 to talk through your KraftMaid project, whether it’s a full kitchen remodel, cabinet refacing, or a countertop replacement that needs the old boxes re-leveled first.

Why Mountain View Residents Choose Us for KraftMaid Service

We’ve worked with KraftMaid sales & service long enough to know which door styles hold up and which hardware quits first. Vantage, Momentum, Prelude – each line has its own failure pattern, and we’ve seen all of them up close in Mountain View kitchens. When a soft-close hinge snaps or a drawer slide loses its clip, we match the genuine KraftMaid component rather than forcing an aftermarket part into a box it wasn’t made for. That matters because the clip geometry on Vantage slides isn’t identical to the generic ones sold at big-box stores.

Noel Carvalho, owner of San Bruno Construction, trained in construction technology at Skyline College and has spent two-plus decades running residential projects across San Mateo County and into Santa Clara County. He grew up off El Camino Real in San Bruno, and he knows the Peninsula’s older housing stock the way only someone who’s framed, shimmed, and scribed through it for years can. Mountain View’s bungalows and ranch homes show up in our work daily – out-of-level floors, tight setbacks, and termite-compromised framing around old cabinet runs are all familiar territory. For larger projects, we can also connect you with our Mountain View General Contractor services.

We coordinate the trades so you don’t have to. Cabinet install, countertop fab, plumbing disconnect, electrical for under-cabinet lighting – one contract, one accountable point of contact.

Common KraftMaid Construction Problems We Solve in Mountain View

Here’s what actually goes wrong with KraftMaid cabinetry in this climate and housing stock, and how we fix it:

• Worn soft-close slides and snapped hinges on Vantage and Momentum boxes. After eight to ten years of daily use in a family kitchen, the soft-close mechanism wears down and the drawer either slams or refuses to stay shut. The clips that hold the drawer front to the slide are the most common break point. We replace slides and hinges with genuine KraftMaid parts when the box is sound, which keeps the cabinet feeling original instead of patched.
• Painted and glazed maple doors yellowing or checking on the sun-facing side. Mountain View’s long dry summers put intense afternoon light through south and west kitchen windows. That UV exposure breaks down the finish on older KraftMaid Expression maple doors, especially the glazed ones. The doors don’t fail structurally – the finish just gives up. We reface with current KraftMaid door styles or refinish to a more stable cured coating.
• Swollen toe kicks and bottom shelves on Prelude boxes over wet crawl spaces. Many Mountain View homes built in the 1950s through 1970s sit on slab or over crawl spaces that trap winter moisture. The particleboard substrate in KraftMaid Prelude toe kicks absorbs that damp air and swells, especially under the sink cabinet. By the time a homeowner notices the door dragging, the box itself has expanded. We can sometimes shave and reseal, but a badly swollen box is a replacement job – and we’ll tell you straight when patching won’t hold.
• Rotted sink base cabinets from slow dishwasher or sink leaks. The leak hides under a closed door. The first sign is usually a hinge that feels loose or a door that won’t align, but the real problem is a water-softened box. We’ve pulled out KraftMaid sink bases in Mountain View where the bottom panel crumbled on contact. Repair means cutting out the rot, reinforcing the box, and resealing against future leaks.
• Racking and gapping on cabinet runs over out-of-level pier-and-beam floors. Old Mountain View bungalows settle unevenly. A KraftMaid run measured plumb at the wall can be an eighth-inch off at the floor line by the time it reaches the far end. We shim and scribe at the toe kick as standard practice here – it’s not an add-on, it’s part of a correct install.

KraftMaid Service in Mountain View: What Local Conditions Mean for Your Equipment

Here’s the thing about Mountain View construction that a cabinet spec sheet won’t tell you. Downtown and Old Mountain View are full of 1900-to-1940s California bungalows on pier-and-beam foundations, and those floors are rarely level. We’ve measured runs where one end of an eight-foot cabinet wall sits nearly half an inch higher than the other. A KraftMaid box is built square, which means it fights an unlevel floor. Install it without shimming and the doors bind, the drawers angle, and the countertop doesn’t seat properly. That’s why every KraftMaid install or reface we do in the 94041 ZIP begins with a floor check and scribe line, just as we do for Los Altos Hills KraftMaid service. On a 1920s bungalow off Castro Street in Old Mountain View, our crew refaced a set of KraftMaid Vantage maple doors, replaced worn soft-close hinges and drawer slides, then scribed new toe kicks to a floor that dropped nearly half an inch across the run. We set a quartz top over the same boxes and the kitchen came back without touching the pier-and-beam subfloor. That’s the difference between a crew that knows Mountain View framing and one that assumes every floor is flat.

KraftMaid Models & Products We Service in Mountain View

We work across the KraftMaid lineup, from the all-plywood Vantage boxes to the full-overlay Momentum framed line and the frameless Prelude full-access boxes. The Expression maple and cherry door collections show up frequently in our Home Remodeling in Mountain View, and we’ve refaced enough of them to know how the finishes behave after years of Peninsula sun. Our parts approach is simple: match genuine KraftMaid hardware when the box is structurally sound – hinges, drawer slides, door and drawer fronts. Aftermarket soft-close slides can work for budget refacing, but we tell owners when a swollen box or rotted sink base means replacement beats patching. For fast turnaround, we keep common KraftMaid hinge and slide components stocked locally, which shortens lead time on most Mountain View service calls.

KraftMaid Service Pricing in Mountain View

FAQs – KraftMaid Construction in Mountain View

Are you an authorized KraftMaid dealer or service provider?
No, we’re an independent KraftMaid service provider serving Mountain View. We are not affiliated with or authorized by KraftMaid or its parent company. We repair, reface, and replace based on what the box and doors actually need, and we match genuine KraftMaid components when the original hardware is the right fix.

Do you use genuine KraftMaid parts or aftermarket replacements?
We use genuine KraftMaid hinges, slides, and door or drawer fronts whenever the box is sound and only the hardware or face has aged out. Aftermarket soft-close slides are fine for budget refacing jobs, but we’ll always tell you when a swollen or water-damaged KraftMaid box means replacement is the smarter spend.

How long does KraftMaid cabinet refacing take in Mountain View?
Most refacing jobs run two to four days depending on cabinet count and whether we’re also replacing countertops. Jobs on downtown bungalows sometimes add a partial day because the piers have settled and we’re shimming and scribing at the floor line to keep doors and drawers aligned. Call (866) 472-1908 and we’ll give you a realistic schedule for your kitchen.

Which KraftMaid cabinet models do you service in Mountain View?
We service KraftMaid Vantage, Momentum, and Prelude lines, plus the Expression maple and cherry door collections. That covers the all-plywood Vantage boxes, full-overlay Momentum framed cabinets, and frameless Prelude full-access boxes found in many Mountain View kitchens built or remodeled over the past two decades.

How much does it cost to reface KraftMaid cabinets in Mountain View?
Cabinet refacing in Mountain View typically falls between $4,000 and $13,000 depending on box condition, door style, and whether we’re addressing water damage or unlevel floors. The final number depends on what we find when we open the sink base. Call (866) 472-1908 for an exact quote – estimates are free and line-itemed.

Service Areas Near Mountain View

We serve Mountain View and the surrounding Peninsula cities. You’ll find us in Mountain View service area regularly, along with KraftMaid service in Loyola and KraftMaid service in Sunnyvale. We also take KraftMaid jobs in Los Altos, Palo Alto, and Cupertino.

Book Your KraftMaid Service in Mountain View Today

Ready for a kitchen that opens and closes like it should? Call Noel and our team at (866) 472-1908 to schedule your free estimate. We’ll check the floors, open the sink base, and tell you exactly what your KraftMaid cabinets need – no guesswork, no upsell pressure.

Written by Noel Carvalho, Owner at San Bruno Construction, serving Mountain View and the Peninsula since 2003. Good construction doesn’t announce itself – it just works, year after year.