Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Tiburon, CA | San Bruno Construction
San Bruno Construction provides independent Belgard hardscape construction and repair across Tiburon, from paver patios and driveways to retaining walls that hold back Marin hillsides. What makes our Belgard work here different is that we approach every paver job as a structural project first. In Tiburon, the base, drainage, and slope stability underneath the Belgard units matter more than the paver you choose. Call (866) 472-1908 to schedule a free estimate.
Why Tiburon Residents Choose Us for Belgard Service
We set Belgard hardscape in Tiburon because our crews already build walls, piers, and drainage on the same steep, slide-prone lots the pavers sit on. The structural work under a Belgard patio is where these jobs are actually won or lost. A paver is a paver until the ground beneath it fails. Noel Carvalho, owner of San Bruno Construction, trained at Skyline College and has spent more than two decades running residential projects across San Mateo County, including hillside work that demands a geotech report before the first paver gets set. We are an independent installer; we are not authorized, sponsored, or endorsed by Belgard. That independence means we make decisions based on what your hillside lot needs, not what a manufacturer’s catalog pushes. For wider Belgard sales & service context, we handle everything from paver selection to final compaction.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Tiburon
Tiburon’s climate and terrain create specific failure patterns. Here are the ones we see most often on hillside properties:
- Lafitt Rustic Slab joints silting and settling. When a patio is terraced into a Tiburon hillside without a geogrid-reinforced, compacted sub-base, winter rain pushes fine silt into the joints and the pavers drop. We cut out the failed base, install proper grid and drainage, and reset the same Belgard units where they are still sound.
- Catalina Grana slabs de-bonding and rocking after winter rain. Water from an uphill neighbor’s slope sheet-flows under the bedding sand when there is no designed drain. The pavers shift. We tie drainage to daylight and re-bed the slabs so they stop moving.
- Weston Stone and Belair wall block bulging or leaning. Older hillside walls in Tiburon were often built without grid or drainage gravel behind them. Once they retain saturated clay through a wet winter, the wall leans. We rebuild the wall, add filter fabric and gravel, and set the original block back where possible.
- Surface staining and efflorescence on light-colored pavers. Runoff from redwood duff and fire-hardening landscape work leaves tannin and mineral deposits on pavers. The staining never gets flushed by normal rain. We clean and seal where it makes sense.
- Paver driveway aprons sinking at the street transition. The point where a hilly Tiburon driveway meets the road takes the most load and often has the thinnest base. We rebuild the apron with a compacted sub-base so it stops sinking.
Belgard Service in Tiburon: What Local Conditions Mean for Your Equipment
Tiburon’s hillside streets often route a Sausalito Belgard service driveway apron or patio over ground that a neighbor’s slope drains through. That changes the whole job. The town’s design-review and geotech scrutiny lands on retaining walls and shoring before it lands on paver color. A permit package has to show how the hardscape will not load or destabilize the slope below. We have seen this play out on steep streets off Paradise Drive, where a beautifully chosen paver pattern got held up because the drainage plan did not account for sheet flow from the uphill lot. That is the reality of building in Tiburon: the geotech report and shoring plan cost more than the finishes budget, and a contractor who does not understand that will underbuild the base and leave you with rocking pavers two winters later. Good construction does not announce itself, it just works, year after year.
Belgard Models & Products We Service in Tiburon
We work with the Belgard product lines most common on Tiburon properties. The Lafitt Rustic Slab is a tumbled, thick-profile paver that reads as old stone, and it is the one we see most often on hillside patios. Catalina Grana is a slab paver with a smoother face that shows up on mid-century and contemporary homes. For retaining walls, we build with Weston Stone and the Belair and Mini-Belair wall block systems. On parts, our stance is practical: we buy genuine Belgard units and matching wall caps so courses, color, and thickness stay consistent with existing work. Where geogrid, filter fabric, and drainage fittings are commodity items, we use quality aftermarket products. If a run of pavers is sound and only the base or wall drainage failed, we rebuild the base and reset the same Belgard units rather than sell a full replacement you do not need. For Tiburon service area coverage, we travel to every hillside street in 94920.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Tiburon
Pricing for Belgard in Chinatown hardscape work in Tiburon depends on access, slope, and what we find under the existing surface. Here are the ranges we quote for common jobs:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the final number: slope of the lot, whether we need geogrid and shoring, drainage routing to daylight, and how many paver units we can salvage and reset. A free estimate includes a site walk and a written line-item quote so you know exactly what you are paying for before we start. Call (866) 472-1908 to book one.
Serving Tiburon, CA — Our Local Coverage Area
We’re based in the Tiburon area and know this community well through our Home Remodeling in Tiburon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Tiburon
Yes, but only with a geogrid-reinforced base and proper drainage. A steep driveway concentrates water and load at the bottom where it meets the street, and if the base is not built for that, the pavers will sink within a season or two. We have installed Belgard paver driveways on some of the steepest streets in 94920, and the ones that hold up are the ones with a compacted sub-base, grid, and a drain that carries water off the slope. Call (866) 472-1908 and we will tell you what your driveway needs.
The base or the drainage failed, not the pavers. In Tiburon, winter rain sheet-flows off uphill slopes and underbedding sand, which erodes the support and leaves pavers rocking. If the original install cut into a slope without compacting and reinforcing the base, settlement is guaranteed. We pull the affected run, rebuild the base with geogrid and gravel, and reset the same Belgard units. That is usually cheaper than full replacement. Call (866) 472-1908 for a site assessment.
In almost every hillside situation, yes. Tiburon’s design-review and hillside overlays require that retaining walls over a certain height show engineering and drainage plans. A wall holding back saturated clay on a slope is a structural element, not landscaping. We pull permits and coordinate the geotech work so the wall passes inspection the first time. Call (866) 472-1908 and we will walk you through what your specific wall needs.
Yes, the Lafitt Rustic Slab is one of the better choices for Tiburon because its thick, tumbled profile handles the thermal swings and wet winters well. The paver itself is sound. What fails is the base underneath, so if you install it on a properly compacted, grid-reinforced sub-base with drainage, it will hold up for decades. We have reset plenty of Lafitt patios where the paver was fine and only the foundation underneath had failed.
Usually yes. We buy genuine Belgard units in the same color and format as your original install, and in most cases the new pavers will blend within a season of weathering. For older patios, faded color and wear can make matching trickier, but we can source the closest current line and, if needed, pull units from a less visible part of the patio and set the new ones there. Call (866) 472-1908 and we will look at a photo or stop by.
Service Areas Near Tiburon
San Bruno Construction serves Tiburon and the surrounding communities across Marin County. We regularly work in Belvedere, where the waterfront lots present their own drainage and access challenges. For Belgard service in Belvedere, we apply the same slope-aware approach. We also handle Belgard service in Marin City and the nearby flatland streets where paver driveways and walks are common.
Book Your Belgard Service in Tiburon Today
If your Belgard patio, driveway, or retaining wall is showing signs of trouble, do not wait for the next winter to make it worse. Call (866) 472-1908 to schedule your free estimate in Tiburon. We will walk the site, explain what is actually happening underneath the surface, and give you a written quote before any work begins.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Tiburon since day one.