Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Bruno Homeowners Choose CGI Construction
We provide independent CGI cabinet installation, repair, refacing, and countertop service across San Bruno as a San Bruno CGI service, with crews that handle these boxes and doors every week. CGI’s ready-to-assemble all-plywood lines and Euro-style frameless cabinets are common in San Bruno kitchens because they deliver a solid product at a mid-range price, but they only perform when the install is dead level, properly shimmed, and sealed against the moisture this foggy coastal climate pushes into homes year-round. We’re an independent construction firm – not authorized, sponsored, or endorsed by CGI – and we bring over two decades of Peninsula remodeling experience to every CGI job, including the airport-overlay and hillside-lot quirks that make San Bruno construction different from anywhere else in San Mateo County.
Call (866) 472-1908 for a free estimate on CGI cabinet work, quartz or granite tops, or a full kitchen remodel in San Bruno.
Why Trust San Bruno Construction for Your CGI Construction?
CGI cabinetry shows up flat-packed or in dealer-delivered boxes, and what happens next – the assembly, the shimming, the leveling, the way the boxes tie into a wall that hasn’t been straight since 1955 – determines whether those cabinets still close cleanly in ten years. Our crews know the product from installs and callbacks across San Bruno, not from a dealer binder. We’ve rebuilt CGI frameless runs that were never squared at install. We’ve replaced CGI thermofoil doors that peeled after three foggy Peninsula winters. We know where these cabinets fail and how to prevent it before the first drawer goes in.
Owner Noel Carvalho grew up off El Camino Real in San Bruno, trained in construction technology at Skyline College, and has spent the past two-plus decades running residential projects across San Mateo County – pulling permits at City Hall on San Mateo Avenue, framing additions under SFO flight paths, and coordinating cabinet and countertop installs where the existing walls fight back. His daughter was born right here in San Bruno, and that’s reason enough to care whether the work holds up twenty years from now. When we install or repair CGI cabinets, we treat the wall behind them as part of the job – because in San Bruno, it always is.
Styles & brands we work with
Common CGI Construction Problems We Fix in San Bruno
- Thermofoil and laminate door fronts peeling at the edges. Steam from cooking and the persistent marine humidity in San Bruno gets under the foil skin, especially on uppers directly over the range or above a dishwasher. The bottom edges lift first, then the corners curl. Once moisture is in, the door is done – patching won’t hold. We replace peeled doors with new CGI-matched fronts, or reface the whole elevation when multiple doors have failed.
- Particleboard case sides swelling after slow leaks. A drip under the sink or behind the dishwasher goes unnoticed for months, and the cabinet side panel absorbs it like a sponge. In San Bruno’s damp climate, that moisture barely evaporates, so the swelling compounds. The result is a sink base that won’t hold a straight line, doors that bind, and joints that separate at the fasteners. When the box is swollen past the door line, we tell you straight: replace the run. Refacing over a compromised box is wasted money.
- Frameless boxes racking out of square. Euro-style frameless cabinets depend on the wall they’re mounted to. San Bruno’s flatland homes from the 1940s and 1950s have walls that drift, and hillside split-levels west of El Camino are worse – sloped lots, settling, and decades of seismic movement leave few truly plumb surfaces. If the installer doesn’t shim and level every box, the fasteners loosen, the cabinets rack, and door gaps open up. We re-shim, relevel, and rebuild the mounting points so the whole elevation lines up.
- Soft-close hinge fatigue and door drift. The concealed hinges CGI uses on frameless doors are good hardware, but after years of daily cycles the springs wear and the doors start to sag. Alignment drifts, gaps become uneven, and drawers that once closed with a soft thump now bounce. We replace worn hinges with OEM CGI hardware or quality aftermarket equivalents, then tune every door and drawer face so the elevation reads clean again.
- Drawer box delamination and glide failure. Under heavy daily use – pots, pans, and cans in a San Bruno family kitchen – the dovetail or staple joints on RTA-style drawer boxes can work loose, and the plastic glides wear into a sticky, grinding feel. We rebuild drawer boxes with plywood-matched panels and install new soft-close slides that handle the weight, without replacing cabinets that are still structurally sound.
CGI Parts & Our Repair-vs-Replace Approach
We source OEM CGI doors, hinges, and drawer boxes when the match matters – same color, same profile, same grain direction so the patch is invisible. When a CGI part is discontinued or the OEM pricing doesn’t make sense for the job, we use quality aftermarket soft-close hardware and plywood replacement panels that meet or exceed the original spec. The honest question is always the box condition. If the cabinet is still square, dry, and tight, we repair or reface. If it’s swollen past the door line, delaminated, or racked out of square from a loose install, we say replace that run – because refacing over a failed box only buys you eighteen months of disappointment.
A San Bruno owner called us with CGI thermofoil uppers over the range peeling along the bottom edges, and the frameless boxes had racked out of square after a slow dishwasher leak. We pulled the swollen panels, rebuilt that run with plywood-boxed CGI-matched cabinets, re-shimmed and leveled the whole wall, then set a quartz top so the new run and the existing counters met clean. The soft-close doors now line up across the full elevation and the leak-prone cabinet sits on a moisture-tolerant box that won’t absorb the next drip.
Call (866) 472-1908 and we’ll tell you straight whether your CGI cabinets are worth saving.
Our CGI Service Process – Step by Step
- 1
Diagnosis on site. We measure every cabinet, check the wall for plumb and level with a laser, open every door and drawer, and inspect the sink and dishwasher areas for moisture damage or swelling. The diagnosis tells us whether this is a door-and-hardware job or a structural rebuild.
- 2
Repair or replacement plan with real numbers. We give you a written line-item quote that separates part costs, hardware, labor, and any drywall or plumbing access work. No allowances that balloon later – San Bruno homes are old enough that we plan for the worst and price for what we find.
- 3
Install and reface with structural correction. Boxes get shimmed, leveled, and screwed into studs – not drywall anchors. Doors and drawers get tuned after final assembly. If we’re templating quartz or granite, the countertop team takes exact measurements after the cabinet bases are locked in place.
- 4
Test and sign-off. Every door opens and closes under a finger’s pressure. Every drawer glides without drag. Seams at the counter meet clean, and the backsplash line is straight. If it doesn’t pass our test, it doesn’t pass – we fix it before we call the job done.
- 5
Warranty and follow-up. We stand behind the labor and the parts we install, and if a hinge drifts or a door needs a quarter-turn six months later, we come back. Good construction doesn’t announce itself – it just works, year after year.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in San Bruno
Our crews handle the full CGI range: Ready-to-Assemble all-plywood cabinetry sold through dealer and online channels, Euro-style frameless boxes with soft-close concealed hinges, thermofoil and laminate door fronts for budget and rental kitchens, and CGI vanity and bath packages paired with quartz tops. We install full kitchen runs, islands, pantry cabinets, and bath vanities across San Bruno – from the flatland bungalows near the Caltrain line to the steeper hillside parcels above the 280 – and we also offer CGI service in Millbrae. We keep common soft-close hinges, drawer slides, and touch-up kits on hand so replacement hardware doesn’t sit on backorder while your kitchen sits open.
We Also Service These Brands
CGI is one strong option among many, and you shouldn’t feel locked into a single cabinet line because that’s what the contractor prefers to install. We also work regularly with KraftMaid, Cambria, Silestone, and Kohler, and we coordinate 50+ vetted product brands across every renovation category – so your kitchen gets the right materials for your budget, not whatever’s easiest for us.
FAQs – CGI Construction Service in San Bruno
No. San Bruno Construction is an independent construction firm – not authorized, sponsored, or endorsed by CGI. We work with their products regularly, we know their failure modes, and we install and repair them honestly. That independence means we recommend what’s right for your kitchen, not what the manufacturer needs pushed this quarter.
Yes, when the match matters. We source OEM CGI doors, hinges, and drawer boxes when you need an exact color and profile match – for example, replacing two peeled thermofoil doors on a run where the rest are fine. When an OEM part is discontinued or overpriced, we offer quality aftermarket soft-close hardware and plywood panels that meet or beat the original. We never install cheap knockoff hinges to save a few dollars without telling you first.
Most single-run repairs or a few door replacements finish in one to two days once parts are on site. Full cabinet refacing or a new kitchen install with countertop templating runs one to three weeks depending on scope and material lead times. If we’re pulling permits through San Bruno City Hall – which we do on structural work or when layouts change – that adds planning review time before we open the first wall. Call (866) 472-1908 for a realistic timeline based on your kitchen.
We service and install the full CGI line: RTA all-plywood cabinetry, Euro-style frameless boxes, thermofoil and laminate door fronts, and vanity and bath packages, including CGI repair in Pacifica. If you have an older CGI run that’s been discontinued, we can usually match the door profile and color through our supplier network or reface the whole elevation for a clean look. Bring us a door or a photo and we’ll tell you what’s possible.
It can, depending on what we touch and whose parts we install. If the cabinet boxes are still under CGI’s manufacturer warranty and the issue is a manufacturing defect – not an install problem – we’ll flag that and direct you to the warranty channel before we do any work. If we’re repairing install-related damage or normal wear, we’re usually outside the warranty scope anyway. We’re straight about which bucket your job falls into, and we won’t sell you work that a warranty claim should cover.
The cost depends on whether we’re repairing existing cabinets, refacing them, installing new ones, or running a full countertop and backsplash job. Here are the ranges we typically see in San Bruno:
| CGI Scope | Typical Range in San Bruno |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation (quartz/granite) | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel (cabinets + counters) | $9,000 – $20,000 |
Every kitchen is different, and San Bruno’s older homes tend to hide surprises behind the walls – call (866) 472-1908 for an exact quote. Estimates are free.
Usually yes, if the door profile and color are still available through our OEM or dealer channels. We’ll pull one of your remaining doors, match it against the sample, and order replacements. If the color’s been discontinued, we can reface just the affected elevation or the whole kitchen for a consistent look. We’ll show you the options before you commit.
Yes, in most cases. Frameless cabinets depend on a rigid, properly shimmed install. If the installer drove screws into drywall instead of studs, or didn’t level each box before joining them, the fasteners will loosen and the cabinets will rack. We remove the affected cabinets, repair or rebuild the mounting points, shim everything to laser-level, and reattach with proper structural fasteners. The cabinets aren’t the problem – the original install was.
Refacing makes sense when the boxes are still square, dry, and structurally sound, and you’re happy with the current layout. New doors and drawer fronts cost less than a full replacement and give you a fresh kitchen in about half the time. If the boxes are swollen, the fasteners have pulled, or the cabinets are racked out of square, replacement is the honest call. We’ll show you the box condition before you decide – no guessing.
Yes. Our team installs the cabinet bases, levels and locks them in, and then the countertop crew templates the quartz or granite directly from the installed boxes. That order matters – templating before the cabinets are permanently set can leave a counter that doesn’t seat right or reveals a gap nobody noticed until the stone arrived. We handle both under one contract, so if the counter doesn’t fit, there’s one accountable team, not two companies pointing at each other.
Absolutely. We can build an island from CGI boxes in a matching or complementary finish, install it level and square, and run the countertop – quartz, granite, or butcher block – as one continuous work surface. Islands in San Bruno’s smaller flatland kitchens sometimes need careful sizing to keep work aisles functional, so we measure the room, not just the island. Call (866) 472-1908 for a free estimate on an island match.
Book Your CGI Service in San Bruno, CA
We serve San Bruno and the surrounding Peninsula with honest CGI evaluations, straight pricing, and crews who know this city’s houses – the fog, the hills, the airport overlay, the walls that haven’t been square since Eisenhower. We also provide CGI in South San Francisco. Call (866) 472-1908 to schedule your free estimate, or tell us what’s wrong with your cabinets and we’ll give you a realistic read on whether it’s a repair or a replacement.
Written by Noel Carvalho, Owner at San Bruno Construction, serving San Bruno since the day he came back to build in the city he grew up in.