Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Day Valley, CA | San Bruno Construction
We’re an independent Jerith service provider working throughout Day Valley and Aptos Hills-Larkin Valley Jerith service areas, and we handle the full scope: new aluminum fence and railing installs, repairs to existing Jerith runs, and the driveway work those steep lots so often need. What makes our Jerith work different here is that we plan every job around two things flatland contractors ignore: Santa Cruz County’s WUI fire code and the narrow private roads that make panel delivery a logistics problem. Call (866) 472-1908 for a free estimate on any Jerith fencing, railing, or driveway project in Day Valley.
Why Day Valley Residents Choose Us for Jerith Service
Jerith aluminum systems are common on Day Valley hillsides, and we’ve worked on enough of them to know exactly where they fail and why. Our crew has installed and repaired Jerith ornamental aluminum fencing and railing systems across the Santa Cruz Mountains for years, including Jerith repair in Aptos and nearby communities, and Noel Carvalho, the owner of San Bruno Construction, grew up watching this region get built out and trained at Skyline College to read plans and think through load paths before any tool leaves the truck. That matters when you’re setting posts on a 30-percent grade over septic lines.
Jerith sales & service from our team means we use Jerith OEM replacement parts, pickets, rails, brackets, and gate hardware whenever they’re available. We keep the wear items that typically fail in this climate (hinges, latches, post caps) sourced locally so a repair doesn’t stall waiting on a distributor. And because we work across Day Valley regularly, we know which roads off Valencia and Trout Gulch can take a delivery truck and which ones can’t.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Day Valley
- Powder-coat chalking and fading on south-facing fence runs. Day Valley gets intense mountain sun, and on a south-facing slope, a Jerith black or bronze powder coat can start to chalk within a few years. We match the Jerith finish where the structural life of the panel is still sound, and we’ll tell you honestly when a full section replacement is the better call.
- Post footings undermined by winter rain and slope creep. Heavy atmospheric-river storms saturate Day Valley’s clay-heavy hillsides, and when soil moves, fence posts rack and gates stop latching. We reset posts in deeper concrete footings than a flatland install would ever require, and we adjust the gate swing at the same time.
- Fastener corrosion from redwood duff and trapped moisture. Day Valley lots are thick with redwood and oak, and wet leaf litter piled against a fence holds moisture against the rails for months. We replace corroded fasteners and add standoff brackets where needed so the bottom rail isn’t sitting in debris.
- Gate sag and latch failure after seasonal soil movement. Older Jerith gates on Day Valley lots rarely get the periodic hinge adjustment they need, and after a wet winter, the latch gaps grow. We rebuild the hinge setup, replace the latch if the internal spring is shot, and set the gate to clear county fire-access requirements.
- Driveway damage from rainy-season erosion on unpaved access. Many Jerith fence projects in Day Valley run alongside driveways that wash out every winter. We handle driveway replacement and regrading in the same scope of work, so the fence line and the access road stop fighting each other.
Jerith Service in Day Valley: What Local Conditions Mean for Your Equipment
Day Valley sits inside a Cal Fire Very High Fire Hazard Severity Zone, and because it’s unincorporated, any new Jerith fence permit has to clear Santa Cruz County review plus defensible-space compliance. On most wooded lots off Valencia Road, that means noncombustible aluminum within five feet of any structure, so vinyl, which we also install in areas like Jerith service in La Selva Beach, gets ruled out right next to the house. Jerith’s aluminum lines are the standard answer here, but the county wants to see the spec and the layout before you dig. Narrow private roads add a second layer: a full panel delivery truck simply cannot turn around on some of these drives, so we stage materials at the nearest turnout and hand-carry. On one steep lot off Valencia Road, a homeowner needed a 150-foot Jerith Industrial Grade aluminum fence to define defensible space around a mid-century cabin, and the unpaved driveway couldn’t take a delivery truck. Our crew staged panels at the road and hand-carried them up, setting each post in deeper concrete footings to account for slope creep and adjusting the gate swing to clear the county fire-access requirement. The run passed inspection without a single panel replacement.
Jerith Models & Products We Service in Day Valley
We service the full Jerith ornamental aluminum lineup: Industrial Grade Aluminum Fence, Regis Series, Majestic Series, and Lexington Series. Most Day Valley installs we see are Industrial Grade or Majestic, chosen for the panel height and the heavier post wall. We use Jerith OEM replacement parts (pickets, rails, brackets, gates) when they’re available to preserve warranty and fit, and we’ll switch to high-quality aftermarket hardware for wear items like hinges and latches when OEM is impractical or backordered. We repair when the posts and rails are still structurally sound; we recommend full replacement when footings are compromised or when the county’s WUI rules push you into a noncombustible system upgrade anyway.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Day Valley
What you’ll actually pay depends on slope, access, and whether the county requires noncombustible material within five feet of the house. A straight, gently sloped run with good truck access will land at the low end of each range; hand-carrying panels up a muddy Valencia Road spur pushes it higher. Every estimate is a written line item, and the price we quote is the price we hold.
| Jerith-Related Service | Typical Day Valley Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
Call (866) 472-1908 and we’ll walk the property, check access, and give you a real number, not a placeholder.
Serving Day Valley, CA — Our Local Coverage Area
We’re based in the Day Valley area and know this community well, and we also provide Jerith service in Rio Del Mar. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Day Valley
Yes, most new Jerith fence runs over three feet in Day Valley require a Santa Cruz County permit, and because the area sits in a Cal Fire Very High Fire Hazard Severity Zone, WUI defensible-space rules apply. In practice that usually means noncombustible aluminum, not vinyl, within five feet of any structure. We handle the county paperwork and design the layout to pass the first review. Call (866) 472-1908 and we’ll tell you whether your specific parcel triggers the WUI requirement before you spend a dollar on materials.
We stage panels and concrete at the nearest usable turnout, then hand-carry or use a compact tracked buggy to move materials up the drive. It adds labor hours, but it’s the only way to get a full Jerith run installed on a lot where a delivery truck physically cannot turn around. We’ll walk the access with you during the estimate and factor the staging plan into the price.
For Day Valley’s conditions, we typically recommend the Jerith Industrial Grade Aluminum Fence or Majestic Series. Both use a heavier post wall and a powder coat that handles mountain UV better than the thinner residential profiles, and the aluminum construction satisfies WUI noncombustible requirements where vinyl won’t pass. We’ll spec the exact panel and post combination for your slope and exposure after a site visit. Call (866) 472-1908 for a site review.
Most sagging Jerith gates in Day Valley are a footing and hinge problem, not a panel problem. We reset the posts deeper, rebuild the hinge stack, and replace the latch if the spring’s gone. If the post itself has twisted or the concrete footing has crumbled downhill, we’ll quote a full gate post replacement in the same Jerith style. Call (866) 472-1908 and we’ll tell you which one you’re looking at within a day.
Yes, we install Jerith on slopes routinely across Day Valley, but it adds cost in three ways: deeper concrete footings to resist slope creep, stepped panel runs instead of racked ones where the grade is severe, and more hand-carry labor when access is unpaved. A steep lot typically lands 20 to 40 percent above the flat-ground price for the same linear footage. The estimate breaks it out line by line, so you can see exactly where the slope is costing you. Call (866) 472-1908 for that written line-item quote.
Service Areas Near Day Valley
We run Jerith installs and repairs across Day Valley service area and the surrounding Santa Cruz and San Mateo County corridors. You’ll find our crews working regularly in Jerith service in Twin Lakes, over the hill in Jerith service in Capitola, and up through the mid-Peninsula towns including San Bruno, Millbrae, and Burlingame, where the original San Bruno Construction shop is based.
Book Your Jerith Service in Day Valley Today
If your Jerith fence is racking, chalked, or leaning after last winter, call (866) 472-1908. We’ll schedule a site walk, work up a written estimate, and get the job moving before the next storm works the hillside any further. Good construction doesn’t announce itself, it just works, year after year.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Day Valley and the Santa Cruz Mountains since day one of the company.