Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Stanton, CA | San Bruno Construction
We install, reface, and repair KraftMaid in Cypress and throughout Stanton, and we do it as an independent contractor, not a manufacturer program. The difference matters here because so many Stanton kitchens sit inside 1950s and 60s tract homes where original plumbing and unpermitted past work shape every cabinet decision. If you’re pricing a KraftMaid project in the 90680 ZIP, call (866) 472-1908 and we’ll give you a straight answer on what your house actually needs.
Our team has pulled apart KraftMaid boxes in enough Orange County kitchens to know how Vantage, Momentum, Expression, and Delight lines hold up under Stanton’s inland heat and small galley layouts. For more on the breadth of our cabinet work, see our KraftMaid sales & service page. We cover every block in Stanton service area, from Beach Blvd to the residential streets off Katella.
Why Stanton Residents Choose Us for KraftMaid Service
Most contractors in Stanton will hang a cabinet box. Fewer can tell you why a KraftMaid Expression door delaminates at the stiles after three inland summers, or whether your Vantage sink base is worth saving after a slow supply-line drip. We can, because we’ve done this work across the city’s post-WWII housing stock for years.
Noel Carvalho, our owner at San Bruno Construction, trained in construction technology and has built his career on reading a house before touching a cabinet. That matters when your Stanton kitchen was framed in 1962 and the wall behind your existing cabinets isn’t square. We plan for what’s behind the drywall, not just what shows on the surface.
Being independent means we recommend what fits your home and budget, not what a manufacturer’s sales program pushes this quarter. We use genuine KraftMaid replacement doors, drawer fronts, glides, and hinges where the box is sound. Where aftermarket soft-close hardware outperforms the original for the money, we’ll say so. Good construction doesn’t announce itself, it just works, year after year.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Stanton
- Peeling thermofoil on Expression doors. Stanton’s hot, dry summers bake kitchens, especially attic-adjacent ones with weak ventilation. Heat cycles break the adhesive bond on thermofoil, and the door edges lift first. We replace damaged doors or reface the run depending on how far the delamination has spread.
- Swollen sink base boxes on Vantage and builder-grade lines. Many Stanton tract homes still run original 1950s and 60s supply lines. A slow drip behind a particleboard sink base goes unnoticed until the box swells and the doors stop closing. We replace the damaged box, confirm the plumbing is dry, and set the new cabinet level.
- Drawer glide and hinge failures in small galley kitchens. The original kitchens in Stanton’s tract homes are compact. That means fewer drawers doing more work, year after year. Side-mount epoxy rollers and self-closing hinge springs wear out. We swap in soft-close hardware that holds up better under daily use.
- Fading and yellowing on painted or stained maple doors. Kitchens with west-facing windows or direct Beach Blvd sun exposure carry heavy UV loads in summer. Painted maple and stained finishes check and fade unevenly. Matching a repair door to a sun-aged finish takes local color-matching we do on site, not from a catalog photo.
- Out-of-square boxes and sagging wall cabinets. Older Stanton homes carry waves in 1960s drywall and plaster, especially after past unpermitted remodel work. Cabinets hung without shimming or proper ledger support drift out of square. We refit, reinforce, and rehang so doors align and drawers glide true.
KraftMaid Service in Stanton: What Local Conditions Mean for Your Equipment
Stanton’s housing stock creates a code-compliance step that reshapes kitchen work more here than in neighboring cities. Many of these 1950s and 60s tract homes carry unpermitted garage conversions and past additions. Orange County permitting requires as-built documentation before we can pull permits for structural or plumbing changes tied to a kitchen remodel. When we open a wall to inspect framing or confirm supply-line routing, we often find conditions that change the cabinet scope: a load-bearing header that was never installed, a sink drain run at the wrong slope, or a wall cavity with old termite damage hidden behind a previous owner’s patch job. That’s why our Westminster KraftMaid service and work in Stanton starts with what’s behind the cabinetry, not just the cabinet order. On a 1962 single-story tract home off Beach Blvd, our crew pulled a set of KraftMaid Vantage cabinets whose sink base had swollen and delaminated from a slow supply-line drip under the original plumbing. We replaced the swollen boxes with new KraftMaid uppers sized to the existing layout, swapped the failing side-mount glides for soft-close hardware, and set a quartz top over the run. The homeowner got a code-compliant, water-tight kitchen without a full tear-out, and we documented the wall cavity while it was open.
KraftMaid Models & Products We Service in Stanton
We work across the KraftMaid lineup: Vantage, the entry-level all-plywood box common in value-driven rehabs; Momentum, the frameless slab-door line for contemporary kitchens; Expression, the thermofoil and painted raised-panel line; and Delight, the mid-tier full-overlay option in painted and stained finishes. Our parts approach depends on what’s failing. Where a box is structurally sound, we order genuine KraftMaid doors and drawer fronts to match. Where hardware has failed, we’ll recommend high-quality aftermarket soft-close glides and hinges that beat the original for the money. If the box is swollen particleboard or the layout is wrong for the room, we’ll tell you refacing or replacement beats patching. We don’t sell repairs that won’t last.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Stanton
Here are the ranges we quote most often for KraftMaid projects in Stanton. Your final number depends on access, existing conditions, and material choices.
| Service | Typical Range in Stanton |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
A free estimate from us includes a site visit, measurements, and a written line-item quote. Call (866) 472-1908 to schedule yours.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Stanton
Yes, refacing works when the cabinet boxes are structurally sound and the layout still fits how you cook. We’ll inspect for water damage, out-of-square boxes, and drawer wear before recommending refacing. If the boxes are swollen or the layout fights you, KraftMaid repair in Buena Park and replacement costs less long-term. Call (866) 472-1908 and we’ll assess your cabinets in person.
The peeling you’re seeing is thermofoil delamination, common on KraftMaid Expression doors in Stanton kitchens that run hot in summer. Dry inland heat and poor ventilation break the adhesive bond, and the stiles peel first. Fixing it means replacing doors or refacing the run, depending on how far the damage has spread.
Yes, we handle permits and documentation for any Stanton kitchen project that requires them. If your home has unpermitted past additions or a converted garage, we document as-built conditions and coordinate with Orange County to bring the scope into compliance before cabinetry goes in. Call (866) 472-1908 to talk through your specific situation.
We do, and we plan for it. 1950s and 60s drywall and plaster in Stanton rarely sits flat. We shim, secure ledgers properly, and adjust cabinets so doors align and drawers glide true after install. It’s one of the steps that separates a kitchen that looks right at the walkthrough from one that still works right three years later.
Yes, we can. We source genuine KraftMaid doors, drawer fronts, glides, and hinges for existing boxes, regardless of who installed them originally. If the original hardware is underperforming, we’ll recommend soft-close aftermarket parts where they outperform OEM for the money. Call (866) 472-1908 for a free estimate on your repair.
Service Areas Near Stanton
We also provide KraftMaid service in surrounding communities: KraftMaid service in Ontario, KraftMaid service in Apple Valley, Garden Grove, Westminster, and Cypress. If you’re nearby and considering KraftMaid cabinetry, call us at (866) 472-1908 and we’ll let you know if we can schedule a site visit.
Book Your KraftMaid Service in Stanton Today
Ready to see what your Stanton kitchen needs, or need La Palma KraftMaid service? Call (866) 472-1908 for a free KraftMaid estimate. We’ll come out, measure, inspect what’s behind the walls, and give you a written quote with no pressure and no guesswork.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Stanton and Orange County.