Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Santa Clara, CA | San Bruno Construction
We provide independent Mr-Glass window, door, and glass service across Santa Clara, including Series 500, Series 300, Series 700, and tempered glass assemblies. The thing that separates our Mr-Glass work in Santa Clara from anyone else’s is that we re-square and re-flash every opening to account for the orchard-era clay soils that move under this city’s housing stock. San Bruno Construction has spent years servicing Mr-Glass products throughout the South Bay, and we carry OEM hardware for active lines plus quality aftermarket equivalents for discontinued ones. Call (866) 472-1908 for a free estimate. Noel Carvalho, our owner, grew up just up the peninsula and trained in construction technology at Skyline College, so he reads a structure before a tool leaves the truck.
Why Santa Clara Residents Choose Us for Mr-Glass Service
Mr-Glass windows and doors are common in Santa Clara’s 1950s-to-1970s ranch homes, and most of what we see is repair work on units that have been in place for decades. We know these product lines from field experience, not from a manufacturer manual. When a homeowner calls us about a sticking Mr-Glass slider near the Old Quad or a fogged Series 700 double-hung off El Camino, we can usually identify the failure mode before we arrive.
We are an independent Mr-Glass service provider. That is not a caveat, it is the spine of how we work. We are not affiliated with, authorized by, or endorsed by Mr-Glass. What we bring is years of hands-on installation and repair across the South Bay, including older Mr-Glass lines that most contractors will not touch because the parts take effort to source. Our independence means we give homeowners straight answers about repair versus replacement, even when the straight answer is that a full-unit replacement makes more sense than throwing parts at a frame that has already failed.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Santa Clara
Here are the five Mr-Glass failure patterns we see most often in Santa Clara homes, and what each one is actually tied to.
- Corroded rollers and pitted tracks on aluminum-frame sliders. The Mr-Glass Series 300 aluminum sliding doors widely installed in 1960s and 1970s Santa Clara ranch homes take decades of winter rain exposure. Wet season moisture sits in the bottom track, the rollers corrode, and the track pits. The door still works until one day it doesn’t, and then the homeowner is lifting the panel by hand.
- Failed perimeter seals leaking into stem-wall framing. Older Mr-Glass windows with dried-out glazing compound and cracked perimeter seals let water track into shallow stem-wall framing during Santa Clara’s winter rains. This is not a cosmetic leak. Once water reaches the framing, you are into rot and repair territory that goes well beyond the window itself.
- Fogged or hazed sealed glass units. Single-pane and early dual-pane Mr-Glass units lose their edge seal over time, especially on west- and south-facing walls where Santa Clara’s dry, warm summers put constant heat stress on the seal. The telltale sign is haze between the panes that you cannot wipe away.
- Sticking sashes and drafty gaps from seasonal clay movement. Santa Clara sits on former orchard land, and the shallow clay soils under many properties expand and shrink with the seasons. That movement racks older Mr-Glass window and door frames out of square. The result is a sash that sticks in July and drafts in January, plus cracks at the frame-to-stucco joint.
- Out-of-square openings that defeat a brand-new install. This is the one we see most often after another contractor has already done the work. A new Mr-Glass unit installed in a frame that was never squared will bind within a year, usually after the first wet winter. We re-square every opening before the unit goes in, and that is the difference between a window that works for twenty years and one that does not.
Mr-Glass Service in Santa Clara: What Local Conditions Mean for Your Equipment
Santa Clara is built on the former orchards of the Santa Clara Valley. The shallow clay soils that once fed fruit trees still sit under many of the city’s postwar ranch homes, and those soils heave and settle with the seasons. For Mr-Glass owners, this is not background trivia. It is the reason a window that fit cleanly in August can bind by March. We re-check and re-square every Mr-Glass opening during dry summer installs, because an out-of-square window installed in July will be binding by the following spring rains. The problem is not theoretical. On a postwar ranch near the Old Quad, our crew pulled a set of fogged, sticking Mr-Glass Series 500 vinyl sliders that had been forced out of square by seasonal clay movement. We squared and reflashed the rough openings, replaced the failed sealed glass units and corroded rollers, and re-set the frames so the sashes slid cleanly ahead of the winter rains. That job is the pattern for how we approach every Mr-Glass install in Santa Clara.
The nearby Santa Clara service area page covers our full local reach in more detail. For this page, the short version is that Mr-Glass work here demands more than a straight swap-out. The ground under the house is an active participant.
Mr-Glass Models & Products We Service in Santa Clara
We service the Mr-Glass lines most commonly found in Santa Clara homes plus the older lines that predate them. That includes Mr-Glass Series 500 vinyl single-hung and sliding windows, Series 300 aluminum sliding doors, Series 700 retrofit double-hung windows, and Mr-Glass tempered shower and patio door glass assemblies.
For active product lines, we use OEM Mr-Glass hardware where it is still available: rollers, latches, weatherstrip, and glazing gaskets. For discontinued lines, we turn to proven aftermarket equivalents that match the original specs, and we tell you upfront which route a repair is going. Some Mr-Glass Series 300 runners and Series 700 balance systems were discontinued years ago. A homeowner deserves to know whether we are installing an OEM part, an aftermarket equivalent, or whether the frame itself has reached the end of its service life. When a frame is too far gone, we will tell you that too, and recommend full-unit replacement with an honest explanation of why.
We also fold Mr-Glass work into larger remodeling scopes. When we are running a home addition in Santa Clara, any Mr-Glass window or patio door gets the same structural attention as the framing, because the opening is only as good as the wall it lives in. See our broader Mr-Glass sales & service page for how that works.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Santa Clara
| Service | Santa Clara Price Range |
|---|---|
| Window replacement (Mr-Glass product scope) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Home addition (including Mr-Glass window/door scope) | $45,000 – $130,000 |
What drives the cost on a Mr-Glass window job in Santa Clara is the condition of the rough opening once the old unit comes out. If the framing is square and the flashing is intact, a change-out stays simple. If clay movement has racked the opening or decades of leaks have rotted the surrounding wood, the scope grows, and any honest bid has to account for that. Our free estimates include a physical inspection of the openings, not a drive-by quote, and every line item is written out so you see exactly what you are paying for. Call (866) 472-1908 for an exact quote. Good construction doesn’t announce itself, it just works year after year, and that starts with an opening that is actually square.
Serving Santa Clara, CA — Our Local Coverage Area
We’re based in the Santa Clara area and know this community well, and we’re also a General Contractor in Santa Clara. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Santa Clara
My Mr-Glass sliders stick every spring in my Santa Clara ranch home, is that the window or the house?
It is usually the house. Santa Clara’s shallow clay soils expand and settle seasonally, and that movement racks door and window frames out of square. The Mr-Glass sliders themselves may have good rollers and clean tracks, but if the frame is out of square, the sash binds. We re-square and re-flash the opening before re-setting the unit. Call (866) 472-1908 for a diagnosis, and yes, we will tell you if the fix is the opening and not the door.
Can you still get parts for discontinued Mr-Glass aluminum sliding doors?
Yes, in most cases. We use OEM Mr-Glass hardware where it is still manufactured, and when a track or roller assembly was discontinued, we source aftermarket equivalents that match the original specification. The honest answer for some Series 300 sliders is that the frame itself has pitted to the point where a new track is throwing good money at a frame that will fail again. We will tell you which situation you are in.
Does Santa Clara’s winter rainy season affect how you install Mr-Glass windows?
It affects the sequencing and the flashing method. We avoid setting sealants in damp conditions, and we pay extra attention to perimeter flashing on any Mr-Glass unit that will face the winter rains. The wet season is exactly when failed flashing and dried-out glazing compound show up as leaks into stem-wall framing. A dry-day install with proper flashing is the difference between a window that stays watertight and one that leaks by February.
Do you handle a Mr-Glass window change-out as part of a home addition near El Camino?
Yes, and we would rather do it that way than retrofit it later. When we are framing an addition in Santa Clara, every Mr-Glass opening gets squared, flashed, and set before the interior work closes up the wall. Retrofitting a window into a finished wall always costs more than setting it during original construction. If you are planning an addition near El Camino, bring us in before the drywall stage and we will coordinate the Mr-Glass scope with the framing.
How do I know if my fogged Mr-Glass window needs a new glass unit or a full replacement?
If the frame is square and structurally sound, a failed sealed glass unit is usually replaceable without pulling the entire window, and that keeps the cost down. If the frame has also racked from clay movement, or the surrounding wood is rotted from a prior leak, then a full-unit replacement is the smarter long-term spend. We inspect the frame condition first and recommend the repair path that makes sense, not the one that is easier to sell.
Service Areas Near Santa Clara
We serve all Santa Clara ZIP codes, 95055, 95056, 95050, and 95051, plus the surrounding South Bay communities. If you are just over the Saratoga side of the city line, see Mr-Glass service in Saratoga. On the north edge toward Sunnyvale and Mountain View, see Mr-Glass service in Buena Vista.
Book Your Mr-Glass Service in Santa Clara Today
If your Mr-Glass windows or sliders are sticking, fogging, or leaking, do not wait for the next rain to find the problem. Call (866) 472-1908 and we will schedule a free estimate, inspect the openings, and give you a written scope with real numbers. Santa Clara homeowners have trusted San Bruno Construction with their Mr-Glass work because we treat the opening as seriously as the unit that goes in it.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Santa Clara and the South Bay, including Mr-Glass in Sunnyvale.