Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Half Moon Bay, CA | San Bruno Construction
San Bruno Construction provides independent PGT window and door service across Half Moon Bay, from replacement sashes and hardware swaps to full impact-rated installs. What makes our PGT work different here comes down to one thing: we’re not an authorized dealer reading from a corporate spec sheet. We’re a general contractor that has spent years watching how PGT vinyl frames, rollers, and seals actually behave when they sit in Half Moon Bay’s salt fog for a decade. If your PGT sliding door drags in its track or a WinGuard window fogs between the panes, call (866) 472-1908 for a straight answer and a free estimate.
Why Half Moon Bay Residents Choose Us for PGT Service
We know PGT’s product lines hands-on because we’ve installed and serviced them on coastal homes from the older neighborhoods near Main Street out to the rural properties along Highway 92. That includes PGT sales & service work on WinGuard impact units, Premier Vinyl, and EnergyVue thermally broken aluminum. We stock genuine PGT replacement sashes, rollers, and glazing for fast turnaround, and we keep quality aftermarket weatherstripping and stainless fasteners for the parts where OEM just doesn’t hold up to salt air. Noel Carvalho, owner of San Bruno Construction, grew up in San Bruno off El Camino Real and trained in construction technology at Skyline College. That education taught him to read plans and understand load paths before a single tool comes off the truck – which is why our PGT work starts with checking the rough opening, not just the window in it.
When a coastal PGT unit fails, the window is usually only half the problem. The flashing, sill pan, and installation detail around it matter just as much. We coordinate the trades so you don’t have to, which means one call handles the diagnosis, the repair or replacement, and the exterior detailing that keeps water out next winter.
Styles & brands we work with
Common PGT Construction Problems We Solve in Half Moon Bay
- Seized rollers and pitted hardware on sliding glass doors. Half Moon Bay’s marine layer keeps aluminum and stainless hardware damp most of the year. Untreated rollers corrode, pit, and eventually lock up so the door won’t slide. We replace with marine-grade hardware and realign the track rather than just lubing it and hoping.
- Wind-driven rain pushing past perimeter seals. PGT vinyl units are designed to shed water, but only if the flashing and sill pan were detailed for wind-driven rain. Many Half Moon Bay homes were flashed for inland conditions, so rain at a 45-degree angle off the ocean finds its way into the rough opening. We fix the opening, not just the gasket.
- Fogged insulated glass from failed glazing seals. Persistent fog and cool interior glass means condensation sits on the glass edge longer here than inland. Over years, that moisture degrades the desiccant and sealant inside the insulated unit until the pane fogs permanently. We re-glaze where the frame is sound.
- Sashes thrown out of square by coastal wood-frame movement. Older Half Moon Bay homes move with moisture cycling – stucco and wood framing expand and contract constantly in the damp air. That movement racks PGT frames and throws sashes out of square, so they drag or won’t latch cleanly.
- Casement window operators seizing from salt corrosion. The gear mechanisms on PGT casement windows are vulnerable to salt fog. Once corrosion gets into the operator, cranking gets harder until the handle strips. We swap operators and re-bed the hardware correctly.
PGT Service in Half Moon Bay: What Local Conditions Mean for Your Equipment
Half Moon Bay sits in a narrow coastal band where the marine layer sits over the town for much of the year, often through the afternoon. That means exterior glass and metal hardware on PGT windows stay damp far longer than they would in Redwood City or San Carlos, where the sun burns off early and dries surfaces by mid-morning. The salt in that fog is the real killer. It corrodes untreated fasteners, eats at roller bearings, and pits the hinge pins on casement windows. We’ve learned that hardware spec matters more than glass choice in Half Moon Bay. A PGT WinGuard unit with standard stainless rollers might last eight years here before it drags. That same door five miles inland—or up the coast at our Moss Beach PGT service—lasts fifteen. The glass isn’t failing – the hardware is, and so is the flashing detail around it. Good construction doesn’t announce itself – it just works, year after year. That’s why we push marine-grade hardware and hard flashing on every coastal PGT job we touch.
PGT Models & Products We Service in Half Moon Bay
We work on the full PGT residential lineup: WinGuard Vinyl impact-rated fixed and single-hung windows, WinGuard Aluminum impact windows and sliding glass doors, Premier Vinyl single-hung and sliding windows, and EnergyVue thermally broken aluminum series. For parts, we use genuine PGT replacement sashes, glazing, rollers, and hardware where the unit is worth keeping. Where OEM parts aren’t practical on older coastal units – especially weatherstripping and fasteners that salt fog destroys – we use quality aftermarket and stainless options that hold up better. On salt-corroded frames that have already lost their seal, we give you an honest repair-vs-replace call rather than patching something that will fail again in two seasons. Our service area covers all of Half Moon Bay, including the coastal neighborhoods near Main Street and the rural properties off Highway 92.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Half Moon Bay
What you’ll pay depends on whether you need a hardware swap, a re-glaze, or full window replacement. Here’s what we see in Half Moon Bay:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Hardware swaps and roller replacements fall on the low end depending on part availability and how far the corrosion has spread into the frame. Impact window installs run higher because you’re paying for rated glass, heavier framing, and the flashing detail that actually keeps wind-driven rain out on the coast. Our free estimate includes a look at the rough opening and the surrounding exterior, not just the window itself. Call (866) 472-1908 and we’ll give you a written, line-item quote before any work starts.
Serving Half Moon Bay, CA — Our Local Coverage Area
We’re based in the Half Moon Bay area and know this community well, including nearby PGT in El Granada. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Half Moon Bay
Salt fog is why. Half Moon Bay’s marine layer keeps hardware damp for months at a time, and the salt accelerates corrosion on roller bearings and tracks. Once the stainless pits, the rollers bind and eventually seize completely. The fix is marine-grade replacement hardware and a clean, aligned track – not just lubrication. Call (866) 472-1908 if your door is dragging and we’ll quote the repair.
Yes, if the frame is still sound. The fog means the insulated glass unit’s seal has failed and the desiccant inside is saturated. We can re-glaze with a new insulated unit and restore the clarity. If the frame is salt-corroded or warped beyond saving, we’ll tell you that straight and give you a replacement price instead.
Yes. Wind-driven rain off the Pacific hits windows at angles that inland flashing was never designed to handle. PGT impact units work, but only if the sill pan and head flashing shed water hard. We re-detail rough openings on almost every coastal install we do. Call (866) 472-1908 for a free assessment of your existing flashing.
Vinyl frames won’t warp from moisture the way wood does, but the framing behind them can move. Older Half Moon Bay homes—and properties needing PGT in Montara—with wood-frame construction expand and contract with the damp air, and that movement racks window frames out of square. The frame itself stays dimensionally stable – it’s the opening that shifts.
No. San Bruno Construction is an independent general contractor. We are not authorized, sponsored, or endorsed by PGT. What we are is experienced with their products on coastal homes, and we use genuine PGT parts where they make sense and better aftermarket options where salt fog proves the OEM spec wasn’t enough.
Service Areas Near Half Moon Bay
We handle PGT service across the coastal side of San Mateo County and north into the Peninsula. If you’re in San Carlos or Redwood City, we’re close by and familiar with how your inland conditions change the PGT failure profile. We also serve San Bruno, South San Francisco, Millbrae, and Burlingame.
Book Your PGT Service in Half Moon Bay Today
If your PGT windows or doors are dragging, fogging, leaking, or just not closing square, we’ll send someone out to look. Call (866) 472-1908 to schedule your free estimate in Half Moon Bay. We’ll tell you exactly what’s wrong, what it costs to fix, and whether it’s worth fixing at all.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Half Moon Bay since 2004.