Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Placentia, CA | San Bruno Construction
We provide independent PGT window and door service across Placentia, from Old Town bungalows to the 1960s tract subdivisions on both sides of the 57, and we also offer PGT repair in Brea for nearby homeowners. What makes our PGT work here different is simple: we know how these units fail in Placentia’s specific conditions, which means we often repair what other contractors would replace. As an independent contractor, not a manufacturer dealer, we recommend the fix that fits your home and your budget. Call (866) 472-1908 for a free estimate.
Why Placentia Residents Choose Us for PGT Service
Noel Carvalho started San Bruno Construction with a straightforward approach: know the products, know the local housing stock, and tell homeowners the truth about what needs fixing. We have installed and repaired PGT windows and doors across north Orange County long enough to know how the product behaves in Placentia’s dry Santa Ana wind corridor versus the damp coastal belt. Which unit lines fail at the sill. Which ones just need re-glazing. And what a proper flashing detail looks like on a 1950s stucco wall versus a 1920s single-wall bungalow.
We coordinate every trade on a Placentia PGT job, so you are not juggling a window contractor, a stucco patch crew, and a trim carpenter. One call, one accountable contractor. That is the whole point. And because we work with 50+ vetted product brands across every major renovation category, a PGT service call never becomes an upsell into a window you do not need.
We use OEM PGT replacement glass, rollers, locks, and weatherstrip wherever the unit is still supported. Where OEM parts are discontinued, we source quality aftermarket hardware that holds up to Santa Ana grit, not cheap knockoffs that fail in a season. If you are weighing repair versus replacement, PGT sales & service is a conversation we have every week with Placentia homeowners.
Styles & brands we work with
Common PGT Construction Problems We Solve in Placentia
- Sill and sill-pan corrosion on older aluminum PGT sliders. Placentia’s clay soils shrink and swell through drought cycles, and that movement racks the frame over time. Hairline gaps open at the sill, wind-driven dust and grit get into the track, and the pan starts corroding. We replace the pan, re-seat the frame, and get the door latching flush again.
- Glazing seal failure and fogging on west- and south-facing PGT vinyl units. Santa Ana winds and inland heat bake the insulated glass seal on these exposures long before the frame shows any wear. We see it constantly in Placentia, especially on homes where windows face the afternoon sun with no shade relief. Re-glazing usually solves it.
- Racked, out-of-square openings on Old Town Placentia homes. Many 1920s and 1930s bungalows sit on shallow pier foundations. Clay shrink-swell moves the wall, and a PGT slider that once latched now binds at the jamb and will not seat its rollers. We re-square and re-shim the opening before touching the window.
- Embrittled weatherstripping, worn rollers, and corroded fasteners on builder-era PGT aluminum units. The 1960s tract subdivisions in Placentia are full of these. A properly sized repair keeps a serviceable window out of the dumpster, and that matters when the replacement means re-trimming a stucco opening.
- Water intrusion at the head flashing on stucco-over-wood homes. Placentia does not get much rain, but when it comes, it finds the gap. On 1950s stucco homes, an improperly flashed PGT window or door lets water behind the stucco. We pull the trim, inspect the flashing, and re-seal to the original weather barrier.
PGT Service in Placentia: What Local Conditions Mean for Your Equipment
Placentia’s Old Town, the original citrus-belt core of 1920s through 1950s homes, is built with single-wall construction and shallow pier foundations. Drive a few blocks east and you are in 1960s stucco tract homes on slab. That means a PGT window or door swap on the same street can need two completely different anchoring, flashing, and permit approaches. On a single-wall bungalow, the window frame often carries structural load, and the pier foundation means the opening may have moved half an inch since the original install. On a slab tract home, the frame is set in stucco, and the main concern is corrosion at the sill and keeping the building paper tie-in intact. The permit office in Placentia will ask for different drawings depending on which side of the street you are on. We prepare both, every time.
This split housing stock is the single biggest reason Placentia PGT work costs what it costs and takes the time it takes. It is also why we do not quote window replacements over the phone without seeing the wall. A 1953 bungalow off Chapman Avenue and a 1968 rancher off Yorba Linda Boulevard are not the same job, even if the window dimensions match, which is why we also provide PGT repair in Yorba Linda with the same attention to local conditions.
PGT Models & Products We Service in Placentia
We service the full PGT residential lineup that shows up in Placentia homes. PGT WinGuard Aluminum impact-rated sliding glass doors and windows. PGT WinGuard Vinyl impact sliders and single-hung windows. The older PGT Premier Aluminum series. And builder-grade PGT Aluminum Series single-hung and sliding windows from the 1960s and 1970s tract era.
For parts, we stock common OEM rollers, locks, and weatherstrip for the PGT lines most common in Placentia, which means most repairs do not wait on a parts shipment. Where OEM is no longer available, we use quality aftermarket hardware that matches the original spec. Our default position: re-glaze, re-screen, and re-hang a sound PGT frame before we sell a full replacement. If you want to see whether your existing windows are worth saving, Placentia service area is where we work every week.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Placentia
What you pay depends on whether we are repairing, re-glazing, or replacing, and whether the home is an Old Town single-wall or a stucco tract build. Here is what Placentia homeowners typically see:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Repair work, like roller and weatherstrip replacement or a single-glaze re-seal, typically runs at the low end of that roof repair range or less. A full impact window package on a Placentia home facing the Santa Ana wind corridor sits higher. Every estimate we write is free, and it is a line-item quote, so you see exactly where the money goes before work starts. Call (866) 472-1908 and we will walk the property and give you real numbers.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Placentia
Does a PGT window replacement on my Placentia home require a permit?
Yes, in most cases. Placentia requires permits for window and door replacements that change the opening size or structural attachment, and on Old Town single-wall homes the permit path is different than on 1960s slab tract homes. We pull the permit, handle the inspections, and make sure the drawings match what the city wants for your specific construction type. Call (866) 472-1908 and we will confirm what your project needs.
Are you a PGT authorized dealer or factory service provider?
No. San Bruno Construction is an independent general contractor. We install, repair, and service PGT windows and doors, but we are not manufacturer-affiliated or authorized. That independence means we recommend the repair or replacement that fits the opening and the house, not the product a dealer wants to move.
Do you use OEM PGT parts or aftermarket?
OEM PGT glass, rollers, locks, and weatherstrip wherever the unit is still supported. Where OEM is discontinued, we use quality aftermarket hardware that meets or exceeds the original spec. We will not install cheap knockoff rollers that fail in a season of Santa Ana grit, and we will tell you which parts are going into your window before we order them.
How long does PGT window or door service take in Placentia?
A straightforward roller, lock, or weatherstrip repair is usually a same-day job. A re-glaze takes longer because the glass is ordered to the unit. A full replacement on a stucco tract home is typically a two-to-three-day install; an Old Town single-wall home can run longer if we need to re-square the opening. We give you a schedule before we start and we stick to it.
What does PGT window replacement cost in Placentia?
Window replacement in Placentia typically runs $4,500 to $15,000, depending on unit count, whether you are going with impact-rated WinGuard or standard PGT aluminum, and whether the home needs re-squaring or flashing repair first. Impact window installation runs $8,000 to $25,000. For an exact quote, call (866) 472-1908. Estimates are free, and we will not push a full replacement if a repair gets you where you need to be.
Service Areas Near Placentia
We also serve PGT owners in PGT service in Anaheim, where the housing mix runs older and the wind exposure shifts, and in PGT service in Chino, where the Santa Ana corridor really makes its presence felt. If you are just outside Placentia in Yorba Linda, Fullerton, or Brea, call us and we will schedule a look.
Book Your PGT Service in Placentia Today
If a PGT window is fogging on the west side of your Placentia home or a slider will not latch after years of clay-soil movement, call (866) 472-1908. Estimates are free, the advice is straight, and we will tell you honestly whether to repair or replace. Good construction doesn’t announce itself, it just works, year after year.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Placentia since 2019.