Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Ben Lomond, CA | San Bruno Construction
We’re an independent Tremron service provider serving Ben Lomond and the Santa Cruz Mountains, including Brookdale Tremron service, and we install and repair Tremron pavers and retaining wall systems on steep, redwood-rooted lots every week. What makes our Tremron work different here is simple: we design for root zones, winter fog, tree debris, and wildfire-interface setbacks that flat-valley contractors never have to think about. Call us at (866) 472-1908 for a free estimate on any Tremron project in Ben Lomond, and we’ll come out, look at your grade, and tell you what’s actually needed.
Why Ben Lomond Residents Choose Us for Tremron Service
Noel Carvalho grew up off El Camino Real in San Bruno, trained in construction technology at Skyline College, and has spent two-plus decades running residential projects across San Mateo County, including plenty of hillside work that translates directly to what Ben Lomond throws at us. We don’t just lay pavers; we read the ground first. On a typical Ben Lomond lot, that means checking root spread before we excavate, calculating drainage under the base, and making sure the edge restraint is built to hold on a slope. We coordinate the trades so you don’t have to, and for Tremron work specifically, that means one crew handles base prep, drainage, paver installation, and finish work under one contract. We’re not a manufacturer-authorized dealer, and we’ll tell you that up front. What we are is our General Contractor in Ben Lomond who knows these products cold because we install and repair them constantly in mountain conditions.
Styles & brands we work with
Common Tremron Construction Problems We Solve in Ben Lomond
- Efflorescence and salt bloom on Allegro pavers. Ben Lomond’s persistent fog and wet redwood duff keep paver surfaces damp for months at a time. The result is chalky white mineral deposits that rise through the paver face. We remove the bloom and, more importantly, adjust the base drainage so water isn’t wicking up through the pavers in the first place.
- Moss and algae growth forcing joint separation on Mega Olde Towne pavers. When redwood canopy blocks sunlight for most of the day, paver joints stay wet and organic material collects fast. Moss roots work into the polymeric sand, then tree roots follow. We strip the joints, treat the growth, and re-sand with a blend that resists moss intrusion longer than the stock sand.
- Base settlement and lost edge restraint on steep slopes. Ben Lomond lots often run at 15 to 30 percent grade. When a base wasn’t cut and stepped into the slope properly, or the edge restraint was installed flat-valley style, pavers migrate downhill and steps separate. We rebuild the base in lifts, add proper edge restraint, and the field stops moving.
- Retaining wall block bulging, cracking, or top-course displacement. Tremron Brentwood wall blocks are solid, but they fail when geogrid and drainage are undersized for hillside loads. Behind a Ben Lomond wall, saturated soil plus root pressure plus slope weight is a real structural load. We excavate behind the wall, correct the drainage, and rebuild the courses with proper grid spacing.
- Paver and wall movement from root intrusion. Redwood roots will find paver edges and lift them if there’s no root barrier. We’ve fixed fields where roots pushed pavers up two inches in a single wet winter. The fix is a root-barrier edge plus a deeper, cleaner base, and the repair actually lasts.
Tremron Service in Ben Lomond: What Local Conditions Mean for Your Equipment
Ben Lomond’s steep, redwood-canopied lots mean Tremron paver projects here must first pass Santa Cruz County geotechnical review and root-zone restrictions, so our base design and drainage plans are typically more involved than a flat-valley driveway, and we build in tree-debris and winter-fog resistance from the start. Here’s what that looks like in practice. On a steep lot off Highway 9 near Mount Hermon Tremron service areas, our crew replaced a cracked concrete drive with Tremron Mega Olde Towne pavers, cutting and stepping the base into the grade and adding a root-barrier edge so the redwood roots couldn’t lift the field. We specified a polymeric sand joint and a deeper drainage bed to handle winter fog and debris, and the finished drive has stayed put through two wet seasons. That’s not marketing language; it’s what the county makes us prove before we pour a single inch of base rock. If you’re on a Ben Lomond hillside, your paver project is a small piece of civil engineering, not a backyard weekend job. We treat it that way from the first site walk.
Tremron Models & Products We Service in Ben Lomond
We install and repair the full Tremron lineup that makes sense for mountain properties, including Allegro pavers, Mega Olde Towne pavers, Brentwood retaining wall blocks, and Ledgestone wall veneer. For repairs, we use OEM Tremron base, edge restraint, and geogrid components to preserve the system’s engineering, and we source quality aftermarket polymeric sand when the OEM blend isn’t available. Repairing isolated pavers or individual wall courses is almost always our first recommendation; full replacement only comes up when base or wall failure is widespread. We keep common Tremron components and matching pavers on hand for most Ben Lomond jobs, which means we’re not waiting a week for a pallet before we can start a repair. See our broader Tremron sales & service page for the full scope of what we handle.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Ben Lomond
Pricing for Tremron work in Ben Lomond runs higher than flat-valley numbers because the grading, drainage, and root-barrier requirements are heavier. That’s not a markup; it’s the actual cost of building on a mountain lot that will hold up. Here are the ranges we quote most often:
| Service | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Your free estimate includes a site visit to Ben Lomond, grade and drainage assessment, and a written line-item quote with no change orders later. Call (866) 472-1908 to schedule.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well, including Tremron in Lompico. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Ben Lomond
Yes, in most cases we can install Tremron pavers without cutting protected roots, but it requires a root-zone survey and an engineered base design that works around the tree protection zone. Santa Cruz County will require this before permitting. We handle the survey coordination and design the base and root-barrier edge to fit the lot. Call (866) 472-1908 and we’ll walk the property with you.
Ben Lomond’s redwood canopy blocks direct sunlight, winter fog keeps surfaces damp, and fallen duff decomposes into organic material that feeds moss and algae growth between paver joints. Flat-valley lots in the sun dry out; mountain lots don’t. The fix is a properly sloped base, deeper drainage, and a polymeric sand joint that resists organic buildup. We also recommend light maintenance once a year to clear duff before it breaks down into soil.
Bulging, cracked block faces, or top-course displacement are signs the wall’s drainage or geogrid is undersized for the slope load. If the issue is isolated to a few courses, we can often repair by rebuilding those courses and correcting the drainage behind them. If the wall is moving as a unit, the base is failing and replacement is usually the honest call. We’ll tell you which one applies after excavation and inspection. Estimates are free; call (866) 472-1908.
Yes. Ben Lomond sits in a wildfire-interface zone, so hardscaping choices register as defensible-space features. Pavers and wall systems made of non-combustible material are actually a good fit, but the county will scrutinize placement relative to slopes and vegetation. We’ll coordinate the product selection with the defensible-space plan so the project passes review without rework.
A typical Ben Lomond paver driveway runs $7,000 to $18,000, depending on slope, length, access, and whether we’re replacing an old concrete slab. The higher cost reflects hillside base prep, engineered drainage, root barriers, and the time it takes to cut and step the base into grade. A flat driveway in the valley doesn’t carry those loads. Call (866) 472-1908 for an exact quote; we’ll give you line-item numbers, not a ballpark guess.
Service Areas Near Ben Lomond
We provide Tremron construction service to the wider Santa Cruz Mountains and down into the Peninsula. If you’re in Tremron service in Bonny Doon, we regularly run crews over the hill from San Bruno and through Tremron service in Felton as well. Homeowners across the Ben Lomond service area, plus San Bruno, South San Francisco, Millbrae, and Burlingame, call us for the same mountain-grade site work.
Book Your Tremron Service in Ben Lomond Today
Call (866) 472-1908 to schedule your free Tremron paver or wall estimate in Ben Lomond. We’ll come out, walk the grade, and give you a written quote built for redwood country, not a flat-valley template. If you’re dealing with a failing drive or wall on a steep Ben Lomond lot, tell us what’s moving and we’ll give you a straight answer on repair versus replace. Good construction doesn’t announce itself – it just works, year after year. Let’s make yours hold up.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Ben Lomond and the Santa Cruz Mountains.