Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Bruno, CA | San Bruno Construction
We install, reface, and repair CGI cabinetry across San Bruno, and the single thing that makes our work here different is that we plan every cabinet run around two local realities: marine fog that never really leaves, and SFO’s height and noise rules that quietly shape what you can build in the hills above El Camino Real. For nearby CGI repair in Pacifica, we apply the same coastal expertise. We’re an independent contractor, not a CGI-authorized shop, which means our recommendations come from what holds up in San Bruno kitchens, not from a manufacturer program. Call (866) 472-1908 for a free estimate on CGI installation, refacing, or repair.
Why San Bruno Residents Choose Us for CGI Service
We’ve spent years fitting CGI ‘Euro’ frameless cabinets, wood-veneer lines, and RTA drawer systems into the specific houses San Bruno throws at us: 1940s flatland bungalows with settled floors, 1960s hillside split-levels with out-of-plumb walls, and small bathrooms where every inch of vanity matters. We also offer CGI service in Brisbane with the same attention to local building quirks. Noel Carvalho, our owner, grew up off El Camino Real in San Bruno and trained in construction technology at Skyline College, where he learned to read plans and understand load paths before touching a tool. That background matters when a CGI cabinet box needs to land square in a room that hasn’t been square since the Eisenhower administration. We stock common CGI hinge and slide components and use Blum-compatible aftermarket hardware where OEM parts are discontinued, so repairs don’t stall waiting on a backorder.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Bruno
- Thermofoil and laminate faces delaminating at bottom edges. San Bruno’s persistent summer fog keeps kitchen air damp, and that moisture works its way into the seam where thermofoil wraps the door face. We see curling and peeling most often on lower cabinets near exterior walls in flatland bungalows where ventilation is poor.
- Frameless full-overlay doors sagging and hinges pulling from the box. When particleboard or MDF swells from humidity, hinge screws lose their bite. We re-set hinges with proper anchors or replace the box section when the material is too far gone.
- Drawer slides and hinges seizing or rusting on exterior-facing lower cabinets. Damp hillside homes in the Rollingwood area get condensation inside cabinet cavities, and cheap slides give up first. We swap in aftermarket soft-close slides that resist the marine air better than the originals.
- Out-of-plumb cabinet runs on sloped or settled floors. Many San Bruno bungalows have floor framing that has moved over 70 years. Full-overlay doors have tight reveals, so even a quarter-inch of floor slope opens gaps and binds doors. We shim and re-level the run before hanging faces.
- CGI vanity lines in small baths showing edge-swelling at the toe kick. Shower overspray and poor bath ventilation hit toe kicks hard. We replace swelled boxes, add proper sealing, and recommend ventilation fixes so the new install doesn’t repeat the old failure.
CGI Service in San Bruno: What Local Conditions Mean for Your Equipment
Every kitchen or bath cabinet install in the Belle Air and Rollingwood neighborhoods has to work around SFO’s Part 77 imaginary surfaces and the city’s airport noise overlay. What that means in practice: the city caps addition height under flight paths and requires acoustically rated assemblies in certain zones, which locks in finished ceiling heights before a single cabinet gets ordered. We plan CGI cabinet layouts around those locked heights, so upper cabinets don’t crowd a drop ceiling or fight an acoustic soffit the permit office mandated. It’s not a constraint we invented, and it’s not one a contractor from outside San Bruno always sees coming. Skip that review step and you can end up with a plan that dies in plan check on San Mateo Avenue. On a 1950s flatland bungalow in Belle Air, our crew pulled a CGI thermofoil kitchen where the lower door faces had delaminated and the frameless boxes were swelling near the exterior wall. We re-flattened the out-of-plumb run, replaced the damaged boxes and door faces, and upgraded to soft-close aftermarket slides, giving the owner a clean, tight install that will hold up in the marine fog.
CGI Models & Products We Service in San Bruno
We install and repair CGI’s ‘Euro’ frameless full-overlay cabinetry, the melamine and thermofoil boxes common in San Bruno remodels, CGI wood-veneer and laminate series for kitchen and bath storage, CGI RTA drawer and door lines for contractor-grade rebuilds, and CGI vanity cabinets. We match OEM hinge, slide, and door-face specs where available, and when OEM parts are discontinued or not worth the markup, we tell you straight and use quality aftermarket hardware instead, typically Blum-compatible slides and soft-close hinges. You get a clear answer on whether refacing, a new box, or a repair is the better spend. For more on what we carry and install, see our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Bruno
Here’s what CGI cabinet work typically runs in San Bruno. These are ranges, not quotes, because every house is different, and a flatland bungalow with settled floors costs more to prep than a newer hillside build with level framing.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the spread: box condition if you’re refacing, how out-of-level the floor is, whether we’re dealing with SFO noise-overlay assemblies, and which CGI line you choose. A free estimate includes a look at your existing cabinet boxes, floor slope, and moisture signs. Call (866) 472-1908 and we’ll give you an exact number before any work starts.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Bruno
No. CGI cabinetry does not require manufacturer authorization for installation or repair. We’re an independent contractor, not CGI-authorized, and we don’t claim to be. Our value is knowing how CGI boxes and door faces perform in San Bruno’s fog and settled older homes, and pricing parts honestly. Call (866) 472-1908 for a free estimate.
The peeling is almost always thermofoil or laminate delamination driven by moisture. In San Bruno, persistent marine fog and kitchen humidity condense on cabinet surfaces, especially lower doors near exterior walls, and the bottom edge is where heat and moisture collect. We can replace door faces, reface the run, or swap a swelled box, depending on how far the damage goes.
It can. Parts of Belle Air and Rollingwood sit under SFO’s Part 77 surfaces and the city’s noise overlay, which can cap addition height and require acoustically rated assemblies. That locks in finished ceiling heights before cabinet layout. We plan around those numbers so your CGI cabinet run passes plan check the first time instead of getting bounced back. Call (866) 472-1908 and we’ll walk your specific street through what applies.
Yes, when the boxes are sound and square. If the boxes are swelled from San Bruno’s damp air or the framing has pulled them out of alignment, refacing hides nothing. We’ll tell you honestly whether refacing or new boxes is the better money, and we carry aftermarket soft-close hardware so a reface gets a real upgrade on the hinges and slides too.
They do, and it’s one of the first things we check. Flatland homes from the 1940s through the 1960s often have floor framing that has settled unevenly over decades. Full-overlay CGI doors have tight reveals, so a sloped run opens gaps and binds doors. We level and shim before installation, which is cheaper than fixing a bad install later. Call (866) 472-1908 for an exact quote.
Service Areas Near San Bruno
We serve San Bruno and the surrounding Peninsula. Our team covers South San Francisco, Millbrae, Brisbane, Burlingame, and Colma. If you’re in one of those cities, we can usually schedule a look within the same week. See our San Bruno service area page for details, or check CGI service in South San Francisco and CGI service in Millbrae for city-specific pages.
Book Your CGI Service in San Bruno Today
Good construction doesn’t announce itself, it just works, year after year. That’s the standard we build to. If your CGI cabinets are peeling, binding, or you’re planning our Home Remodeling in San Bruno, call Noel and our team at (866) 472-1908 for a free estimate. We’ll come out, look at your floors, your fog exposure, and your ceilings, and give you a straight answer.
Written by Noel Carvalho, Owner at San Bruno Construction, serving San Bruno since 2003.