Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Upland, CA | San Bruno Construction
We provide independent CGI cabinet and countertop service across Upland, CA – from 91784 foothill homes to the 91786 flatlands. We’re not a CGI dealer or warranty shop; we’re the contractor who re-boxes, levels, and re-specs CGI kitchens so they hold up in Upland’s old ranch stock and fire-zone climate. Call (866) 472-1908 to talk through your project or schedule a free estimate.
Why Upland Residents Choose Us for CGI Service
Most Upland kitchens with CGI cabinets are in 1950s – 1970s ranch homes that have been remodeled once, maybe twice. The cabinets went in when the floor wasn’t level, or the exhaust fan never got ducted properly, or a supply line dripped behind the toe kick for two years. We see that every week. Our shop knows how CGI’s RTA and assembled cabinet lines actually behave in those conditions – not how they look in a catalog. Noel Carvalho and our crew have pulled enough CGI thermofoil doors off Upland kitchens to know exactly where they fail and whether the box is worth saving. We source OEM hinges, glides, and door fronts when the cabinet core is sound, and we say so plainly when it isn’t. Independent advice, no dealer agreement behind it.
Styles & brands we work with
Common CGI Construction Problems We Solve in Upland
- Peeling thermofoil and melamine door edges. Upland summers push attic heat down into single-story kitchens without real venting. CGI thermofoil fronts delaminate at the edges within a few years in those conditions. We re-door with OEM fronts or upgrade the finish rather than leaving peeling laminate in place.
- Racked RTA boxes on sloped citrus-era floors. Many 1920s – 1970s Upland homes have slab floors that drop an inch or two from the original grade. CGI cam-lock and dowel joints loosen, the box goes out of square, and doors drag. We re-level, shim, and re-box the run instead of forcing hinges to compensate.
- Swollen toe kicks and sink aprons. Old galvanized plumbing behind Upland ranch kitchen cabinets leaks slowly. Particleboard and MDF core in CGI boxes swells at the bottom. We catch the leak, cut out the damaged panel, and replace the run if the core is gone.
- Sagging doors and dropped drawers. Entry-level CGI hinges and drawer slides tear out of soft core material at the screw holes. A quick part swap doesn’t fix it when the core is compromised. We re-box or upgrade to solid-wood dovetail drawers with Blum-style slides.
- Chapter 7A scoping surprises in the 91784 foothills. Even a kitchen remodel in a high fire severity zone can trigger wildland-urban interface review on vents and exterior assemblies. We build that into the plan before CGI cabinets are ordered, so the job doesn’t stall at inspection.
CGI Service in Upland: What Local Conditions Mean for Your Equipment
Here’s what a generic CGI page won’t tell you: Upland’s foothill properties in 91784 sit in designated high fire severity zones. That means a kitchen or bath remodel up there can get pulled into Chapter 7A wildland-urban interface review – ember-resistant vents, fire-rated exterior doors, and roof assembly requirements that flatland contractors in neighboring cities rarely touch. If you’re re-specing a CGI kitchen in the 91784 hills, that scoping shapes the whole job: when we open a wall for plumbing or electrical, the inspector may want the vent or exterior door brought up to current WUI code. We also provide CGI service in Claremont with the same fire-zone expertise. We plan for that before cabinets are ordered, so the remodel passes inspection and the finish work doesn’t get ripped out later for a code upgrade nobody saw coming. It’s one of the reasons Upland homeowners call us instead of a shop that only does cabinet swaps.
CGI Models & Products We Service in Upland
We work on the CGI Ready-to-Assemble shaker and slab-front lines – the euro-style cam-lock boxes that show up in owner-installed kitchens and ADU conversions around Upland – plus the All Wood plywood-box assembled series that local cabinet dealers spec for semi-custom packages, and the thermofoil and melamine door fronts common on budget refreshes in rental and flip properties. We also coordinate CGI quartz and granite countertop programs through Southern California slab yards. Our approach: source OEM CGI hinges, glides, and replacement doors when the box is square and worth keeping. When the particleboard core has already swelled or racked, we switch to quality aftermarket hardware – solid dovetail boxes, soft-close slides – and tell you honestly which way makes sense. For broader CGI sales & service, we cover the full scope from cabinet install to countertop fabrication.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Upland
What you’ll pay depends on whether we’re re-boxing a failing run, refacing over sound boxes, or doing a full kitchen remodel. Here’s where Upland jobs typically land:
| Scope | Typical Upland Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
A free estimate from us includes a straight read on whether your CGI boxes are worth saving, what the parts will cost, and what the labor breaks down to by line item. No vague allowances. Call (866) 472-1908 to schedule.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well, and we also offer San Antonio Heights CGI service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Upland
Yes, when the boxes are square and the substrate is dry. Refacing makes sense for a 1960s Upland kitchen where the door fronts are peeling but the boxes haven’t racked or swollen. We also handle CGI repair in Montclair with the same OEM parts and honest assessment. We replace doors, drawer fronts, and hardware with OEM or upgraded parts, then set new countertops if you want. If the core has swelled or the run has gone out of square, refacing hides the problem instead of fixing it. We’ll tell you which one you’re looking at. Call (866) 472-1908 and we’ll take a look.
Often yes. Upland’s foothill homes in 91784 sit in designated high fire severity zones, so when a remodel opens exterior walls, vents, or roof penetrations, the scope can trigger wildland-urban interface review under Chapter 7A. That affects ember-resistant vents, exterior door assemblies, and roof edges. We build that into the plan before cabinets are ordered, so the inspection doesn’t surprise you mid-job.
Thermofoil and melamine fronts delaminate from heat and moisture. In Upland, attic-level summer heat radiates down through single-story ranch kitchens that lack real exhaust ventilation, and the laminate separates at the edges. It’s a finish failure, not a structural one – the doors can be replaced with OEM fronts or upgraded material. The fix depends on whether the boxes underneath are still sound.
Most Upland kitchens we do land between $14,000 and $45,000 depending on whether we’re re-boxing a failing run, refacing over sound cabinets, or doing a full remodel with new counters and backsplash. Our Rancho Cucamonga CGI service follows the same pricing structure. A cabinet-only job starts around $4,000. The exact number depends on the box condition and how much of the existing layout you keep. Call (866) 472-1908 for a free written estimate and we’ll break it down by line item.
No. San Bruno Construction is an independent contractor – not authorized, sponsored, or warranty-backed by CGI. We source OEM parts when they’re the right call, but our recommendations come from field results, not a dealer agreement. That’s the point: we tell you what actually holds up in an Upland ranch kitchen, not what a showroom wants to sell.
Service Areas Near Upland
We serve Upland and the surrounding area, including San Bruno, South San Francisco, Millbrae, Brisbane, Burlingame, and Colma. If you’re just outside Upland service area, call us and we’ll tell you straight whether we can get to you. Our team also runs CGI service in Fullerton and CGI service in Stanton for clients further into the county.
Book Your CGI Service in Upland Today
If your CGI cabinets are peeling, racking, or swelling in an Upland kitchen, don’t patch around it. Call (866) 472-1908 to schedule a free estimate. We’ll tell you what’s worth saving, what needs re-boxing, and what it costs – before you spend a dollar.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Upland and the surrounding area. Good construction doesn’t announce itself – it just works, year after year.