Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Bonny Doon, CA | San Bruno Construction
We provide independent our Home Remodeling in Bonny Doon service, from standing seam metal roofing to impact-rated windows and WUI cladding systems. The difference here isn’t our tooling or our trucks; it’s that we know how a CGI assembly behaves on a steep, wooded parcel at the end of a dirt drive off Empire Grade. If you need a CGI roof inspected, repaired, or installed from scratch, call (866) 472-1908 and we’ll give you a straight answer about what’s actually needed.
San Bruno Construction is a full-scope residential general contractor, and while CGI systems are a specialty within our exterior envelope work, they’re not a side hobby. We’ve spent years installing and retrofitting CGI building envelope systems across the Santa Cruz Mountains. That field time matters here more than anywhere else, because Bonny Doon’s terrain punishes mediocre flashing and undersized fasteners faster than any flat lot in San Mateo County. We handle the full CGI sales & service scope: roof panels, window units, cladding, and the repair work in between.
We serve all of Bonny Doon service area, including parcels off Bonny Doon Road, Empire Grade, and the private drives that branch off both. San Bruno Construction is independent, not manufacturer-affiliated, which means we repair and replace based on what the structure needs, not what a warranty program tells us to sell.
Why Bonny Doon Residents Choose Us for CGI Service
The homes up here aren’t model homes. They’re post-CZU rebuilds, older redwood-sided cabins, and custom builds tucked into canyons where the wind comes through harder than the county average suggests. We know what CGI materials do in those conditions because we’ve watched them do it, season after season. Our crew has reset standing seam panels that crept along the ridge after two wet winters, and re-hung impact windows that bound in their frames as hillsides settled. That’s not theory; it’s what happens when you work this terrain long enough.
Noel Carvalho, our owner, grew up off El Camino Real in San Bruno and trained in construction technology at Skyline College, where the program drilled load paths and plan reading before anything else. That background shows up on every Bonny Doon job, especially when we’re sequencing a roof replacement around a crane schedule that only fits a narrow private drive in sections. We coordinate the trades so you don’t have to, and we use CGI OEM components because aftermarket clips and gaskets void fire ratings and fail faster on this terrain. One Bonny Doon General Contractor, every phase, from countertops to rooflines to ADUs.
Styles & brands we work with
Common CGI Construction Problems We Solve in Bonny Doon
- Fastener back-out on CGI standing seam roofs. Bonny Doon’s steep pitches, repeated winter rain, and thermal cycling work fasteners loose over time. Panels creep downhill, seams open, and the roof loses its fire rating. We reset panels with OEM clips and seam sealant, and add the snow guards and clip spacing the slope actually requires.
- Moisture-trapped rot under Class-A shingle assemblies. When a CGI Class-A shingle system goes over an older redwood-sheathed roof without upgraded ventilation, the deck rots from the underside. The granule loss and soft spots don’t show until after a wet season, but by then the sheathing is already compromised.
- Binding CGI impact windows on hillside homes. Framing shifts on expansive soils or after slope movement, and the window units bind and fail to latch. The glass is fine; the opening is the problem. We re-shim, re-flash, and reset the unit rather than charging for a replacement that isn’t needed.
- WUI cladding seams opening in high-wind canyon exposure. Fire-rated sealant and clip spacing get skipped on original installs more often than homeowners realize. When wind hits a canyon wall, the seams separate, and the assembly’s fire resistance drops. We re-seal with the correct fire-rated product and re-clip to spec.
- Undersized snow guards and clips on steep pitches. A roof spec’d for a 4:12 slope doesn’t hold on an 8:12. Undersized clips and missing snow guards cause the creep and back-out we see on so many Bonny Doon rebuilds. We correct the spec, not just the symptom.
CGI Service in Bonny Doon: What Local Conditions Mean for Your Equipment
Because so much of Bonny Doon’s post-CZU rebuild is happening on parcels at the end of unpaved private drives off Empire Grade, every CGI metal roof or impact-window package has to be staged and crane-lifted in small loads. That changes how we sequence roof panels and window deliveries compared with a flat lot in town. A 20-panel standing seam order can’t arrive on one flatbed when the drive narrows to 11 feet at the halfway point and the last switchback has a 14% grade. We break deliveries into sections, stage materials at a cleared pull-off, and schedule crane time in half-day windows that account for weather delays coming over the ridge. For CGI owners specifically, that means panel bundles get broken into smaller lifts, window units arrive in staged batches rather than one drop, and the roof assembly goes on in a sequence that keeps the structure weathertight between deliveries. If someone quotes you a CGI roof without asking about your driveway width and turnaround space, they haven’t built up here.
Good construction doesn’t announce itself; it just works, year after year.
CGI Models & Products We Service in Bonny Doon
We service the full CGI in Pasatiempo exterior envelope line that shows up on Bonny Doon homes: CGI Standing Seam Metal Roofing, CGI Class-A Fire-Rated Asphalt Shingle Systems, CGI Impact-Rated Window and Door Series, and CGI WUI-Compliant Exterior Cladding and Soffit Panels. On the parts side, we use CGI OEM components, clips, fasteners, gaskets, and seam sealants, because aftermarket substitutes void the fire rating and fail faster on this terrain. Where a CGI assembly is still sound but a single pane, seal, or flashing detail is compromised, we repair rather than re-roof or re-side the whole elevation. That’s the honest call, and it’s the one we make every time.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Bonny Doon
Pricing depends on access, slope, and the condition of what’s already there. A standing seam roof on a flat, easy-access lot will run lower than the same roof on a steep parcel off a single-lane private drive. The table below gives you honest ranges for the CGI work we do most often up here.
| Service | Price Range |
|---|---|
| Metal Roof Installation (CGI standing seam system) | $15,000 – $40,000 |
| Roof Replacement (CGI Class-A shingle assembly) | $8,000 – $20,000 |
| Roof Repair (CGI panel, clip, or flashing repair) | $400 – $1,800 |
| Impact Window Installation (CGI impact-rated units) | $8,000 – $25,000 |
Every free estimate includes a site visit, a written line-item quote, and a straight conversation about what needs doing versus what can wait. Call (866) 472-1908 to schedule yours.
Serving Bonny Doon, CA — Our Local Coverage Area
We’re based in the Bonny Doon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Bonny Doon
Yes. We stage materials in sections and crane-lift in small loads that match what the driveway and switchbacks can handle. The roof goes on in a sequence that keeps the structure weathertight between deliveries, and we spec clips and snow guards for the actual slope, not a generic pitch.
CGI in Ben Lomond Class-A roof assemblies are designed to meet WUI fire standards, but the install details matter: correct clip spacing, fire-rated sealant at seams, and proper underlayment. We install to the exposure category for your specific parcel, and we document every step so your inspection record is clean.
Usually not. On Bonny Doon hillsides, binding windows are almost always a framing or settlement issue, not a glass failure. We re-shim and re-flash the opening and reset the same unit. Replacement only makes sense when the frame or insulated glass unit itself is compromised. Call (866) 472-1908 and we’ll tell you which one you’re dealing with.
Steep pitches, repeated winter rain, and thermal cycling work fasteners loose over time, especially where the original install used undersized clips or skipped snow guards. The fix is resetting panels with OEM clips and seam sealant, and adding the hardware the slope requires. It’s a repair, not a re-roof.
We do both, and we lean toward repair whenever the assembly is still sound. One compromised flashing detail or a single failed seal shouldn’t trigger a full replacement, and we won’t push one on you. For an exact quote on your specific situation, call (866) 472-1908; estimates are free.
Service Areas Near Bonny Doon
We work throughout the Santa Cruz Mountains and up the Peninsula. Beyond Bonny Doon, our crews cover CGI service in Felton, where similar slope and drainage issues show up on a smaller scale, and CGI service in Mount Hermon, where older homes need WUI retrofits more often than full rebuilds. We also serve San Bruno, South San Francisco, Millbrae, Burlingame, Brisbane, and Colma for flatter-lot projects that don’t involve mountain logistics.
Book Your CGI Service in Bonny Doon Today
If your CGI roof is showing signs of fastener back-out, your impact windows are binding, or you’re planning a rebuild and want the exterior envelope done right the first time, call us at (866) 472-1908. We’ll schedule a free estimate and tell you exactly what’s going on up there.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Bonny Doon and the Santa Cruz Mountains since 2002.