Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Day Valley, CA | San Bruno Construction
We provide independent CGI construction service across Day Valley, from full kitchen remodels built around CGI cabinetry to roof replacements specified for wildfire-prone hillside lots. The one thing that makes our CGI work here different is that every project starts with the same question: how does this hold up on a steep, wooded parcel with county-only permitting and Cal Fire defensible-space rules? Noel Carvalho runs San Bruno Construction with that filter on every material call, and it’s why our kitchens and roofs in Day Valley don’t get built the same way they would in Capitola or Watsonville. Call (866) 472-1908 for a free estimate.
Why Day Valley Residents Choose Us for CGI Service
Most construction crews around Santa Cruz County know CGI as a cabinet line. We work with the full material envelope: ready-to-assemble boxes, pre-hung door slabs, solid-surface countertop blanks, and the roofing assemblies that tie into them. Noel grew up off El Camino Real in San Bruno, trained in construction technology at Skyline College, and has spent two-plus decades reading manufacturer install specs before a single tool comes off the truck. That matters in Day Valley, where an out-of-level redwood cabin floor will defeat a lazy cabinet install inside one wet winter. We read CGI’s published installation tolerances and finish schedules directly, which means your shaker boxes get shimmed and sistered to a continuous level plane instead of nailed to whatever the old floor is doing. We also know the access problem: narrow private drives and switchbacks mean material staging and debris removal need real planning, not a flatland choreography.
Styles & brands we work with
Common CGI Construction Problems We Solve in Day Valley
- Racked doors and drawer fronts on out-of-level cabin floors. Mid-century mountain cabins in Day Valley settle unevenly. The floor sags a half-inch or more across a 10-foot run, and CGI cabinet boxes installed to the old floor plane start rubbing within months. We fix the floor plane first, then set the cabinets.
- Swollen toe kicks and sink bases from undetected moisture. Particleboard and MDF core boxes soak up water fast when a well-system leak or atmospheric-river intrusion goes unnoticed under an older cabin. CGI boxes are well-machined, but no MDF core survives standing water. We inspect the moisture source before we rebuild the cabinet run.
- Countertop seams opening after hillside slab movement. Day Valley additions often tie into older timber-framed structures on graded footings. When the grade moves, laminate and solid-surface seams telegraph the stress. We check the footing and seam layout before cutting countertop blanks.
- Door and millwork rot on north-facing wooded elevations. Exterior CGI door slabs take moisture at the bottom rail where fire-defensible clearing left a gap in the cladding. On north-facing Day Valley lots, that gap never dries out. We correct the cladding detail, then set the slab.
- WUI inspection flags on roof vents and fascia gaps. Cal Fire’s wildland-urban interface rules in Day Valley screen roof vents and close the gaps at fascia and roof edges. A roof replacement or kitchen project that adds eave ventilation has to do it to WUI spec. We close those flags while the crew is already on the roof.
CGI Service in Day Valley: What Local Conditions Mean for Your Equipment
Day Valley is an unincorporated pocket of the Santa Cruz Mountains above Aptos, and every construction decision runs through Santa Cruz County’s building department rather than a city hall. That adds rural review layers for septic, well, and slope stability that flatland contractors never see. For CGI work specifically, the WUI requirement changes what we specify. A kitchen remodel on a wooded Day Valley lot is also a defensible-space project: roof edges, deck ledges, and vents all get screened or Class A-rated, and the cabinet and roofing materials have to sit inside that envelope. We regularly specify CGI shaker cabinets with moisture-rated cores near well equipment, and pair the cabinet run with a roof assembly built for ember resistance. On a steep private drive off Day Valley Road, our crew remodeled a 1960s redwood-framed cabin kitchen where the original CGI-style boxes had swelled at the toe kick from years of well-system moisture and the floor was out of level by nearly an inch across the run. We sistered and shimmed the subfloor, set new CGI shaker cabinets on a continuous level plane, and closed the roof vent and fascia gaps the WUI inspection flagged while we had the ladder up. The doors swing clean through a full rainy season now.
CGI Models & Products We Service in Day Valley
We work with the CGI Ready-to-Assemble Kitchen Cabinet lines in both shaker and flat-slab door styles, the 42-inch upper wall cabinet series for tall-ceilinged mountain kitchens, CGI solid-surface and laminate countertop blanks, and the pre-hung interior and exterior door slabs that finish cabinetry-adjacent millwork. For finish-critical components, we source genuine CGI boxes, doors, and hardware. For hinges, slides, and shelf pins, we’ll use a quality aftermarket part when it outlasts the OEM in a damp, shaded Day Valley climate. When a cabinet run is structurally sound but the fronts and finish are tired, we reface and re-hardware rather than replace. On a hillside lot, the labor to haul new boxes up a private road is often the deciding cost.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Day Valley
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Roof Replacement | $8,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the bill in Day Valley is access and subfloor correction. A kitchen that needs an hour of shimming before the first cabinet lands costs more than a flat-floor install down in Aptos, and it should. The free estimate walks the site, checks the floor plane and the moisture story, and gives you a written line-item quote before you commit to anything. Call (866) 472-1908 to get yours.
Serving Day Valley, CA — Our Local Coverage Area
We’re based in the Day Valley area and know this community well, and we also offer Aptos Hills-Larkin Valley CGI service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Day Valley
Are you an authorized CGI dealer?
No. San Bruno Construction is an independent construction provider. We’re not manufacturer-affiliated or authorized by CGI. We work with CGI product lines because they machine well and hold tolerances, and because our crews know how to install them on difficult mountain sites. That independence means we’ll tell you when an aftermarket hinge or slide is the better call for a damp Day Valley kitchen.
Do you use genuine CGI parts?
For boxes, doors, and finish-critical components, yes. We source genuine CGI. For hardware like hinges, slides, and shelf pins, we’ll spec a quality aftermarket alternative when it outlasts the OEM part in a shaded, moist climate. We’ll tell you which is which and why before we order.
How long does a typical Day Valley CGI kitchen remodel take?
Most full kitchen remodels in Day Valley run three to eight weeks once materials are on site and the access plan is set. The variable is the floor plane. An older cabin with an inch of sag across the run takes longer to sister and shim than a newer build with a level subfloor, and rainy-season access over unpaved private drives can stall foundation and concrete work. We stage that work for the dry months whenever possible.
Which CGI models do you cover?
We service the CGI Ready-to-Assemble Kitchen Cabinet lines in shaker and flat-slab door styles, the 42-inch upper wall cabinet series, CGI solid-surface and laminate countertop blanks, and the pre-hung interior and exterior door slabs used in cabinetry-adjacent millwork. If you’ve got a blend of these lines in a Day Valley home, we can tell you what’s worth keeping and what should be replaced.
How much does a CGI kitchen remodel cost in Day Valley?
A full kitchen remodel with CGI cabinetry typically runs $14,000 to $45,000 in Day Valley. The spread depends on access, floor correction, and whether you’re refacing or replacing the cabinet runs. Call (866) 472-1908 for an exact quote. Estimates are free, and the line-item breakdown shows where the hillside premium is going.
Service Areas Near Day Valley
Beyond Day Valley, our crews cover the nearby Santa Cruz Mountain communities and the San Francisco Peninsula. We run CGI service in Twin Lakes where coastal moisture affects cabinet cores differently than ridge-top lots. We also handle CGI service in Capitola for flatland builds. You can review our full Day Valley service area coverage and browse our CGI sales & service page for model details.
Book Your CGI Service in Day Valley Today
If your CGI cabinets are racked, your countertop seams have opened, or your roof needs a WUI-compliant replacement, call (866) 472-1908. We’ll walk the site, check the floor plane and the access route, and give you a written estimate that accounts for Day Valley’s hillside reality. Good construction doesn’t announce itself – it just works, year after year.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Day Valley and the Santa Cruz Mountains.