Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Redwood Shores, CA | San Bruno Construction
We provide independent CGI cabinet and millwork service across Redwood Shores, CA, from refacing builder-era kitchens to full remodels that respect the bay-mud reality under 94065. What makes our work different here: we plan every project around Redwood Shores’ engineered-fill lots, perched water table, and BCDC/flood-zone permit triggers before we touch a single cabinet box. If you’re looking at peeling thermofoil doors or a water-swollen sink base, call (866) 472-1908 for a straight answer and a free estimate.
Why Redwood Shores Residents Choose Us for CGI Service
We’ve spent years installing and rebuilding CGI cabinetry and millwork across the Peninsula, including the builder-era kitchen and bath packages that dominate Redwood Shores’ 1980s and 90s build-out. We know these cabinets at the fastener level: the slab-door laminate bases, the raised-panel thermofoil fronts, the melamine pantry boxes. That’s why homeowners here call us instead of a cabinet shop that has never dealt with a racked-out run on an settling fill lot.
Our founder, Noel Carvalho, grew up in San Bruno and trained in construction technology at Skyline College, where he learned to read plans and think through load paths before pulling tools off the truck. That’s the mindset we bring to every Redwood Shores job. We are an independent construction firm, not authorized, sponsored, or warranty-backed by CGI, and we tell homeowners plainly when a CGI box or door can be saved and when it can’t. For full-scope work, see our CGI sales & service page.
Styles & brands we work with
Common CGI Construction Problems We Solve in Redwood Shores
- Thermofoil peel and delamination. The RTF door skins on CGI builder-grade fronts start lifting at the edges after 15 to 30 years. Bayside fog and interior humidity swings in Redwood Shores homes without whole-house dehumidification accelerate the failure. We match OEM-equivalent thermofoil or laminate doors when the boxes are sound.
- Particleboard and MDF box swelling. A slow supply-line or disposal leak behind a toe kick can turn an original CGI sink base into a swollen, dark-stained mess. In Redwood Shores, slab-on-grade units over engineered fill make this worse; any moisture that reaches the base cabinet gets wicked into the particleboard and stays there.
- Hinge, glide, and pilaster screw pull-out. After 25 to 35 years of opening and closing, original CGI boxes start shedding hardware. On Redwood Shores fill lots that have settled over time, cabinet runs get racked out of square, so screws that once held pull loose with nothing left to bite. We repair or sister the carcass before remounting hardware.
- Laminate face lifting and water staining at the toe kick. On slab-grade floors sitting over engineered fill, a perched water table keeps the toe-kick zone damp. That dampness travels up into the cabinets. We re-grade exterior drainage away from the stem wall first, then address the cabinet damage.
- Drawer glide and face-frame alignment issues after settling. Redwood Shores sits on bay mud and fill, and that fill compacts unevenly. Doors that used to close flush now bind or sag. We re-square the boxes, shim the runs, and reset the fronts so the whole wall of cabinets works like it did the day the builder left.
CGI Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores is almost entirely built on reclaimed Bay salt-marsh and fill, which means virtually every construction project here is a geotechnical and dewatering problem before it’s a building problem. The lots off Redwood Shores Parkway and Bridge Parkway sit on bay mud with a perched water table that can show up eight inches below the slab. For CGI cabinet owners, that’s not an abstract fact. It means excavation for a kitchen island or peninsula often hits water and requires dewatering; it means moisture that would evaporate in CGI in San Carlos lingers against your base cabinets here; it means slab settling racks your cabinet runs out of square over a 20-year span. Because Redwood Shores is mapped largely as flood zone and sits under BCDC bayfront jurisdiction, even a kitchen or bath remodel that touches a wet wall or slab can trigger geotech and flood-review scrutiny that neighboring cities never see. We plan cabinet and plumbing layout changes around that review from day one, so you don’t get surprised at the permit counter.
CGI Models & Products We Service in Redwood Shores
We service the CGI builder-grade lines that dominate Redwood Shores’ master-planned kitchens: slab-door laminate base and wall cabinets, raised-panel thermofoil (RTF) door and drawer fronts on particleboard boxes, melamine closet and pantry systems, and builder-grade vanity and linen cabinetry in baths. Our parts approach is OEM-equivalent: we match CGI hardware and door profiles with hinges, glides, and thermofoil or laminate-matched fronts when the boxes are structurally sound. We only recommend full replacement when swelling or racking has compromised the carcass. On 1980s-90s Redwood Shores kitchens, refacing plus new tops is often the honest call. On water-damaged bases, it isn’t.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Redwood Shores
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the final number in Redwood Shores: whether we’re refacing or replacing, the condition of the original CGI boxes, whether dewatering is needed for slab work, and whether BCDC or flood-zone review adds pre-construction time. A free estimate from us includes a walkthrough of the boxes, a straight read on repair-versus-replace, and a written line-item quote. Call (866) 472-1908 for exact pricing on your kitchen.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Redwood Shores
Yes, in most Redwood Shores kitchens, as long as the particleboard boxes are still square and dry, we can reface original CGI cabinets with OEM-equivalent laminate or thermofoil fronts and new hardware for a fraction of full replacement cost. We only recommend replacement when swelling or settling has physically compromised the carcass. Call (866) 472-1908 and we’ll give you an honest assessment.
Thermofoil peel accelerates in Redwood Shores because the low-lying bayside location brings persistent fog, onshore wind, and interior humidity swings that stress the adhesive bond at the door edges. Homes without whole-house dehumidification see the failure sooner. Humid air gets under the skin at the bottom edge and the peel creeps upward. We can replace the fronts with matched thermofoil or upgrade to painted MDF or solid-wood doors that hold up better near the Bay.
Often yes, if the work touches a wet wall, slab penetration, or drainage line, because much of Redwood Shores sits in mapped flood zones under BCDC bayfront jurisdiction. Even a straight cabinet swap that includes plumbing changes can trigger a geotech or flood-review request that neighboring CGI in Belmont or San Carlos cities never see. We pre-clear that review path before we order a single box, so the schedule stays honest.
The perched water table under Redwood Shores keeps slab and toe-kick zones damp, which wicks moisture into particleboard bases and shortens the life of cabinet carcasses sitting directly on the slab. For countertop installs, it means any base that sits below grade or against the slab needs a moisture break and proper exterior drainage re-graded first. We address the drainage before we set the cabinets, not after the swelling starts.
Yes, we match existing CGI door profiles and finishes with OEM-equivalent fronts and keep the original layout when the boxes are structurally sound and the layout still works. If fill-lot settling has racked the run out of square, we re-square and re-shim the boxes before refacing. Call (866) 472-1908 for a free read on your existing doors.
Service Areas Near Redwood Shores
From our San Bruno base, we serve homeowners across the upper Peninsula. If you’re in a neighboring community, see our Redwood Shores service area page. We also provide CGI service in Chinatown and CGI service in Half Moon Bay. San Bruno, South San Francisco, Millbrae, Brisbane, and Burlingame are all within easy reach.
Book Your CGI Service in Redwood Shores Today
Tell us what your cabinets are doing. We’ll tell you, straight, whether saving them is worth it. Call (866) 472-1908 to schedule your free estimate, and include Noel Carvalho or the team at San Bruno Construction in the conversation. Good construction doesn’t announce itself, it just works, year after year.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Redwood Shores and the San Francisco Peninsula, including CGI in San Mateo, since 2002.