Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Scotts Valley, CA | San Bruno Construction
Our General Contractor in Scotts Valley provides CGI construction service that means something specific here: installing and repairing KraftMaid cabinetry and Cambria quartz surfaces in homes built on sloped, pier-supported lots where floors move with the seasons. We’re San Bruno Construction, an independent contractor serving Scotts Valley ZIP codes 95066 and 95067. We use OEM KraftMaid and Cambria parts wherever available, and we start every surface job by checking what the hillside under your kitchen is actually doing. Call (866) 472-1908 for a free estimate.
Why Scotts Valley Residents Choose Us for CGI Service
We’ve spent years retrofitting exactly the brands Scotts Valley owners pick by name, KraftMaid cabinets, Cambria quartz, into homes that sit on grade beams over shallow soil and redwood roots, not flat subdivision lots. That distinction matters more than most people realize. Noel Carvalho, our owner, trained in construction technology at Skyline College and has run residential projects across the Bay Area for over two decades. He learned early that a cabinet door that sags isn’t always a hinge problem. Sometimes it’s the hill under the house settling one inch while the other side stays put. We read the spec sheets and install manuals ourselves. We don’t lean on a dealer relationship to tell us what works here.
We coordinate every trade, every material, every inspection, through one contract. For Scotts Valley homeowners, that means the cabinet layout, the countertop template, the floor leveling, and the drainage corrections all happen in the right order, without three different crews pointing fingers at each other.
Styles & brands we work with
Common CGI Construction Problems We Solve in Scotts Valley
Here’s what regularly shows up in this valley, and why:
- Sagging KraftMaid full-overlay hinges and sticky drawer glides. In the 1960s to 80s split-levels off Glenwood and similar slopes, cabinets often get shimmed instead of re-framed when floors are out of level. The shims compress over time, the box torques, and the doors drift. We re-hang and re-shim against the actual floor condition before touching hardware.
- Cracked or separated Cambria seams on island slabs. An island spanning an uneven, pier-supported kitchen floor flexes as the soil expands and contracts through wet winters and dry summers. The slab can’t flex with it. We reset the island base square and level before templating new quartz.
- Swelling cabinet boxes and delaminated fascia on lower-level kitchens. Storm-driven moisture wicks through unpermitted or failing retaining walls into the back of a cabinet run. By the time the doors stick, the box has usually absorbed water for months. We find the water path first, then decide what’s salvageable.
- Out-of-square cabinet runs with wandering reveal lines. A remodel laid out against a bowed ranch-era wall without checking plumb looks fine in June and wrong by October. Doors rub, gaps open, and the whole run reads crooked. We frame and scribe to the actual wall, not the assumption.
- Cambria edge chips along a seam that was never properly supported. When a slab spans a dishwasher opening or an end cabinet that’s settled a quarter inch, the overhang carries weight it was never meant to hold. We add structural support before sealing the seam.
CGI Service in Scotts Valley: What Local Conditions Mean for Your Equipment
Because so many Scotts Valley homes sit on sloped lots framed with pier-and-grade-beam foundations over shallow soil and redwood roots, a kitchen or bath surface job here often starts with leveling and re-shimming a floor that moves seasonally, a step flat-lot crews never budget for. Off Glenwood on a wooded slope, our crew took on a split-level kitchen where the KraftMaid full-overlay cabinets had been shimmed two inches off a pier-supported floor that had settled unevenly, so drawers wouldn’t track and the Cambria island slab had popped a seam. We re-leveled the subfloor over the grade beams, rehung the existing boxes with fresh OEM glides and soft-close hinges, and reset the island on a properly shimmed, squared base so the quartz seam closed true. The homeowner kept the cabinet faces and the slab but got a kitchen that finally opens and closes cleanly through both the wet and dry seasons. That’s the Scotts Valley difference: the surface work is downstream of the ground work. Skip the ground work and you’ll be chasing the same seam crack every October.
CGI Models & Products We Service in Scotts Valley
We install, repair, and reface the CGI-adjacent cabinet and surface lines that dominate Scotts Valley remodels: KraftMaid Vantage-series full-overlay cabinets, KraftMaid HomeCrest semi-custom lines, and Cambria quartz surfaces like Ella and Torquay. For repairs, we use OEM KraftMaid and Cambria hardware, hinges, and slab-matching components wherever they’re still available, so finishes and drilling patterns line up. When OEM stock is discontinued, we source quality aftermarket glides and soft-close hinges that match the original geometry. We keep common KraftMaid hinge and glide components on hand for faster Scotts Valley turnaround, and we’ll tell you straight when a box or slab is sound enough to repair versus when replacement is the cheaper long-run answer. No upsell on a cabinet run that just needs re-hanging and re-shimming. For full-scope projects, we also pull from CGI sales & service for cabinet and countertop brand access across our broader catalog.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Scotts Valley
What drives cost in Scotts Valley more than anything is the unseen prep: floor leveling, base anchoring, and drainage corrections that flat-lot jobs never need. Here are the ranges we typically see for this market:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Your free estimate includes a look at the floor structure under the room, the wall plumb, and any moisture or drainage red flags behind the cabinets, because those line items are the difference between a quote that holds and one that blows up mid-job. Call (866) 472-1908 to schedule yours.
Serving Scotts Valley, CA — Our Local Coverage Area
We’re based in the Scotts Valley area and know this community well, and we also offer CGI service in Mount Hermon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Scotts Valley
Yes, but only after the floor is addressed. Cambria quartz is rigid and will crack along a seam if the island flexes under it. We level and re-shim the subfloor over the grade beams, strengthen the pier supports if needed, and then template the slab against a stable base. Skipping that step is how seams pop a year later. Call (866) 472-1908 and we’ll assess your floor before any countertop gets ordered.
Usually repair. Most of what we see off Glenwood and the surrounding slopes is box shifting from settlement, not failed materials, and we provide Felton CGI service for similar conditions. We re-level the run, rehang the boxes, and install fresh OEM glides and soft-close hinges. If the face frames are sound and the boxes haven’t wicked moisture, you keep the cabinets and save thousands. We’ll tell you honestly when replacement makes more sense.
Yes, and this is one of the most common fixes we handle in Scotts Valley. The original island gets removed, the floor beneath it is leveled and the base is squared and anchored to the subfloor structure. Then the new island goes in dead level, which means the Cambria slab sits flat and the seam stays closed through seasonal movement. Call (866) 472-1908 to discuss your specific layout.
We coordinate them. Scotts Valley projects, like those needing CGI service in Ben Lomond, often need Santa Cruz County grading, erosion, and fire-clearance review layered on top of city building permits, especially when a remodel involves drainage work or exterior changes within the wildland-urban interface. We manage the permit sequencing as part of the job so you’re not filing separate applications yourself.
Yes, and it often shows up first in the lower cabinets. Storm moisture wicks through the wall into the cabinet boxes, swelling the panels and delaminating fascia. A failing retaining wall can also shift the soil pressure against the foundation and worsen floor movement under the island. We trace the water path before repairing surface damage. For an exact quote on your kitchen, call (866) 472-1908, estimates are free.
Service Areas Near Scotts Valley
We serve Scotts Valley and the surrounding mountain and coastal communities across the Santa Cruz and San Mateo corridors. If you’re up the hill or down the grade, we likely cover you. See Scotts Valley service area for the full local map. We also handle CGI service in Pasatiempo and CGI service in Santa Cruz for cabinet and quartz work in those areas.
Book Your CGI Service in Scotts Valley Today
Good construction doesn’t announce itself, it just works, year after year. That’s the standard we build to in Scotts Valley. If your KraftMaid cabinets are sagging, your Cambria seams are open, or you’re planning a kitchen that has to hold up on a hillside, call (866) 472-1908 for a free estimate.
Written by Noel Carvalho, Owner at San Bruno Construction, serving Scotts Valley and the surrounding area.